HyunSung Jang wrote:
hello.
i just finished setting up nagios as distributed monitoring and i
found a problem.
we have a backbone switch called BB1.
and we have 2 access switch called A1, A2 which uses uplink to BB1
so this makes both A1,A2 have its parent BB1
and then i prepared 4
Hi all,
I configured check_cluster plugin to monitor two services that work
redundant (1 is up, 1 is down all the time).
The plugin that check the services, returns UNKNOWN state for the
service that are down. However, check_cluster return that both
services are OK (CLUSTER OK: Disk-Cluster: 2
HyunSung Jang wrote:
first thing to remember is a nagios server has no parent since he is the
source of test .
but in a distributed nagios setting there is the exception to the rule.
thank you for your comment,
but, I think i already configured like you just said.
actually A1,A2 is not a
thank you for your comment,
but, I think i already configured like you just said.
actually A1,A2 is not a server but it is our access switch i mean
there are many servers under A1, A2
let me describe my environment again,
BB1-A1-server1, server2, nagios1(center), nagios2(for servers under A1),
On Wed, Feb 24, 2010 at 9:45 PM, Assaf Flatto nag...@flatto.net wrote:
HyunSung Jang wrote:
first thing to remember is a nagios server has no parent since he is the
source of test .
but in a distributed nagios setting there is the exception to the rule.
yes.
thank you for your comment,
Hi
I get this message on one pe830 (OM 6.1.0) :
CRITICAL: [
http://support.euro.dell.com/support/topics/topic.aspx/emea/shared/support/my_systems_info/de/details?c=del=deServiceTag=3LVBD2Jxxx]
Physical Disk 0:0 [Wdc WD1600JS-55MHB0, 160GB] on ctrl 0 needs attention:
-- SYSTEM: PowerEdge
Nicole Hähnel m...@nicole-haehnel.de writes:
Hi
I get this message on one pe830 (OM 6.1.0) :
CRITICAL: [ xxx] Physical Disk 0:0 [Wdc WD1600JS-55MHB0, 160GB] on ctrl 0
needs
attention:
-- SYSTEM: PowerEdge 830, SN: xxx
INTERNAL ERROR: Use of uninitialized value in string eq at
HyunSung Jang wrote:
On Wed, Feb 24, 2010 at 9:45 PM, Assaf Flatto nag...@flatto.net
mailto:nag...@flatto.net wrote:
HyunSung Jang wrote:
first thing to remember is a nagios server has no parent since he
is the
source of test .
but in a distributed nagios setting
On 24 February 2010 11:27, Brandino Andreas ampra...@gmail.com wrote:
Hi all,
I configured check_cluster plugin to monitor two services that work
redundant (1 is up, 1 is down all the time).
The plugin that check the services, returns UNKNOWN state for the
service that are down. However,
Nope, it should be as follows (example parent - child )
nagios2 - A2 - BB1 - Server 3
I'm getting confusing. sorry for misunderstanding
at this time, I read nagios documentation again and in my understanding that
nagios2 is connected to A1 not A2.
all of my nagios servers are connected to
Hey,
I want to get informations about the traffic of the port 1 from my cisco switch
which understands SNMP. So I installed Nagios, the nagios plugins, snmpd, snmp
and mrtg. I use the check_mrtgtraf command in my switch.cfg to do this.
After installing mrtg like described at
On Feb 24, 2010, at 1:39 PM, Rainhard wrote:
Hey,
I want to get informations about the traffic of the port 1 from my cisco
switch which understands SNMP. So I installed Nagios, the nagios plugins,
snmpd, snmp and mrtg. I use the check_mrtgtraf command in my switch.cfg to do
this.
Hi all -
I have installed Nagios and working fine so far. I am running
into one issue. I would like to install NRPE on several servers. But I might
not get root access for that. my question is Can I install NRPE as an user ?
Appreciate your help and thoughts
Regards
Can you please elaborate more on full sudo access. It is limited root
privileges?
Appreciate your time
Regards
On Wed, Feb 24, 2010 at 3:59 PM, Robert Wolfe rwo...@i-evolve.com wrote:
If you can get full sudo access, that should be good enough.
*From:* akp geek
If you can get full sudo access, that should be good enough.
From: akp geek [mailto:akpg...@gmail.com]
Sent: Wednesday, February 24, 2010 3:53 PM
To: Nagios-Users Mailinglist
Subject: [Nagios-users] Installing NRPE
Hi all -
I have installed Nagios and working fine so far. I am
On Wed, 24 Feb 2010, akp geek wrote:
Hi all -
I have installed Nagios and working fine so far. I am running
into one issue. I would like to install NRPE on several servers. But I might
not get root access for that. my question is Can I install NRPE as an user ?
Sure. Just
Does anyone know if there's a working version of check_cisco_ping?
http://exchange.nagios.org/directory/Plugins/Hardware/Network-Gear/Cisco/check_cisco_ping/details
It has an issue with utils.pm which is being deprecated in favor of
Nagios::Plugin.
What I need is the ability to SSH into a
I believe the default port of 5666 is an unprivileged port.
-Original Message-
From: patrick.mor...@hp.com [mailto:patrick.mor...@hp.com]
Sent: Wednesday, February 24, 2010 4:46 PM
To: akp geek
Cc: Nagios-Users Mailinglist
Subject: Re: [Nagios-users] Installing NRPE
On Wed, 24 Feb 2010,
Hello,
The documentation at
http://nagios.sourceforge.net/docs/3_0/objectdefinitions.html for
Service Definition says that you can use a 'servicegroups' directive to
assign a service to a servicegroup instead of using the 'members'
directive in the service group:
*servicegroups*: This
19 matches
Mail list logo
