Re: [Nagios-users] Nagios check latency
What are your check_result_reaper_frequency and max_check_result_reaper_time set to? I use 3 and 15 respectively here. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk From: Muhamad Faiz [mailto:muhamad.f...@asia.xchanging.com] Sent: 13 August 2013 04:49 To: Nagios Users List Subject: [Nagios-users] Nagios check latency Hi guys, My Nagios setup are having high service check latency. Check nagios latency result is 240 seconds! ./check_nagios_latency.sh -w 30 -c 60 CRITICAL: Latency at 240.183 seconds! Modification in my Nagios.cfg file is only as below. Other than this, is default. # MODIFIED admin_email=muhamad.f...@asia.xchanging.commailto:admin_email=muhamad.f...@asia.xchanging.com admin_pager=muhamad.f...@asia.xchanging.commailto:admin_pager=muhamad.f...@asia.xchanging.com translate_passive_host_checks=1 log_event_handlers=0 use_large_installation_tweaks=1 enable_environment_macros=0 enable_embedded_perl=0 use_embedded_perl_implicitly=0 max_concurrent_checks=1600 service_perfdata_file_processing_command=process-service-perfdata-file-pnp-bulk host_perfdata_file_processing_command=process-host-perfdata-file-pnp-bulk service_perfdata_file_processing_interval=60 host_perfdata_file_processing_interval=60 status_update_interval=40 # /usr/local/nagios/bin/nagios -s /usr/local/nagios/etc/nagios.cfg Nagios Core 3.5.0 Copyright (c) 2009-2011 Nagios Core Development Team and Community Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified: 03-15-2013 License: GPL Website: http://www.nagios.org Timing information on object configuration processing is listed below. You can use this information to see if precaching your object configuration would be useful. Object Config Source: Config files (uncached) OBJECT CONFIG PROCESSING TIMES (* = Potential for precache savings with -u option) -- Read: 0.415803 sec Resolve: 0.006900 sec * Recomb Contactgroups: 0.001862 sec * Recomb Hostgroups:3.819786 sec * Dup Services: 0.637380 sec * Recomb Servicegroups: 3.419804 sec * Duplicate:0.000417 sec * Inherit: 0.013748 sec * Recomb Contacts: 0.00 sec * Sort: 0.00 sec * Register: 0.616385 sec Free: 0.029930 sec TOTAL:8.962015 sec * = 7.899897 sec (88.15%) estimated savings RETENTION DATA TIMES -- Read and Process: 0.863815 sec TOTAL:0.863815 sec Timing information on configuration verification is listed below. CONFIG VERIFICATION TIMES (* = Potential for speedup with -x option) -- Object Relationships: 0.080360 sec Circular Paths: 0.001152 sec * Misc: 0.011244 sec TOTAL:0.092756 sec * = 0.001152 sec (1.2%) estimated savings EVENT SCHEDULING TIMES - Get service info:0.051265 sec Get host info info: 0.032301 sec Get service params: 0.10 sec Schedule service times: 0.002476 sec Schedule service events: 0.002514 sec Get host params: 0.00 sec Schedule host times: 0.000937 sec Schedule host events:0.001287 sec TOTAL: 0.090790 sec Projected scheduling information for host and service checks is listed below. This information assumes that you are going to start running Nagios with your current config files. HOST SCHEDULING INFORMATION --- Total hosts: 11753 Total scheduled hosts: 7 Host inter-check delay method: SMART Average host check interval: 300.00 sec Host inter-check delay: 42.86 sec Max host check spread: 30 min First scheduled check: Tue Aug 13 11:43:54 2013 Last scheduled check:Tue Aug 13 11:43:54 2013 SERVICE SCHEDULING INFORMATION --- Total services: 18662 Total scheduled services: 170 Service inter-check delay method: SMART Average service check interval: 535.76 sec Inter-check delay: 3.15 sec Interleave factor method: SMART Average services per host: 1.59 Service interleave factor: 1 Max service check spread: 30 min First scheduled check: Tue Aug 13 11:52:49 2013 Last scheduled check: Tue Aug 13 11:58:39 2013 CHECK PROCESSING INFORMATION Check result reaper interval: 10 sec Max concurrent service checks: 1600 PERFORMANCE SUGGESTIONS --- I have no suggestions - things look okay. Any
Re: [Nagios-users] ESXi/vCenter Monitoring
check_mk 1.2.3 should do that for you. There's a bit of pain migrating your config into check_mk's WATO, but IMHO it's worth it in the long run. http://mathias-kettner.com/check_mk.html It might be prudent to wait for the check_mk 1.2.3i2 before playing with it, though. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk From: Daniel Ceola [mailto:daniel.ce...@occfiber.com] Sent: 12 August 2013 16:09 To: Nagios Users (nagios-users@lists.sourceforge.net) Subject: [Nagios-users] ESXi/vCenter Monitoring Hello all, I have a lot of host servers as VM's on our ESXi infrastructure, managed with vCenter. We also use vSphere DRS to help keep the load on host systems balanced. Due to the DRS, our VM's can sometimes move around from being on one host to being on another w/o my knowledge beforehand. Does anyone know if there is any sort of plugin available for Nagios Core that would basically talk to my vCenter system and find out what VM's are on which hosts, and automatically update that VM's Parent directive in the host definition? Daniel Ceola System Administrator daniel.ce...@occfiber.commailto:daniel.ce...@occfiber.com Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 0LE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with 2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031iu=/4140/ostg.clktrk___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Update Nagios 3.3.1 to 3.5.0
That depends on how and where you installed it from in the first place. From RPM, and if so, which repo? Or from source? Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk From: Jorge Luis Paneda [mailto:jlpan...@sciodev.com] Sent: 05 August 2013 16:42 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Update Nagios 3.3.1 to 3.5.0 Hi, I'm running Nagios 3.3.1 on Centos Linux release 5.9 and I want to update my Nagios version to 3.5.0. ¿Which ones would be the best steps or best way to accomplish this? Regards, Jorge L. Pañeda [Description: Description: scio] Systems Administrator Scio Consulting | IT Infrastructure Dept. Las Cañadas 501 Int. 230 Col. Tres Marías Morelia, Mich., México Tel. (443) 310-96-01 ext. 402 U.S. Phone: 408 404 3897 Ext. 402 www.sciodev.comhttp://www.sciodev.com/ Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 0LE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. inline: image001.jpg-- Get your SQL database under version control now! Version control is standard for application code, but databases havent caught up. So what steps can you take to put your SQL databases under version control? Why should you start doing it? Read more to find out. http://pubads.g.doubleclick.net/gampad/clk?id=49501711iu=/4140/ostg.clktrk___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] rpmbuild nagios-3.5.0
Talking of DAG's RPMs, if you'd been using Nagios 3.2.3 from rpmforge, I've written a blog post on how to build Nagios 3.4.1 / 3.5.0 as a replacement, using same file locations. The last postscript in the blog is the relevant stuff for 3.5.0. http://www.rebee.clara.net/blog/archives/2012/05/entry_198.html Cheers, Phil -Original Message- From: Daniel Wittenberg [mailto:dwittenberg2...@gmail.com] Sent: 24 July 2013 23:27 To: Nagios Users List Subject: Re: [Nagios-users] rpmbuild nagios-3.5.0 FWIW - the spec file in 4.0 has been completely rewritten and should work a lot better, based on Dag's RPM's and merged my changes in and what I've been using for almost a year now. Dan On Jul 24, 2013, at 11:55 AM, frank ra...@they.org wrote: Just speaking for myself here, in my experience distro-level packaging usually isn't part of a project's goals and can be an extreme distraction considering the vast number of distros out there, all with their own little quirks. Spec files and other contrib items work their way into source trees and are useful until the 3rd party API changes and the original maintainers lose interest. I'd look into the checkin history of the spec file to see if anyone has been making regular updates. Or even easier, go get the SRPM from EPEL, which is known to work, and alter it as you see fit for your purposes. -f On Wed, 24 Jul 2013, alexus wrote: thank you for your recommendation) although I'd really like to know why it was ok on 3.2.3 and not ok going forward (seems like a bug to me that needed to be reported back to nagios folks). On Wed, Jul 24, 2013 at 10:42 AM, Trond Hasle Amundsen t.h.amund...@usit.uio.no wrote: alexus ale...@gmail.com writes: I'm unable to build RPM w/ nagios 3.5.0, last one that worked for me was 3.2.3. any ideas/suggestions? I'd recommend using the already prebuilt package for rhel6 which is available from EPEL[1]. Add the EPEL repo and you can simply do yum install nagios and be done :) [1] http://fedoraproject.org/wiki/EPEL Cheers, -- Trond H. Amundsen t.h.amund...@usit.uio.no Center for Information Technology Services, University of Oslo - - See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831iu=/4140/ostg. clktrk ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- http://alexus.org/ -- See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831iu=/4140/ostg.c lktrk ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831iu=/4140/ostg.clktrk ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 0LE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that
Re: [Nagios-users] nagios SIGSEGV on archive rotation
Which version of nagios? Are you using check_mk / mk_livestatus? Check the thread Nagios 3.5.0 segfaulting at midnight in this list's archives. Cheers, Phil -Original Message- From: Mike W [mailto:uce_m...@yahoo.com] Sent: 09 July 2013 15:58 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] nagios SIGSEGV on archive rotation I am having an issue with nagios and the archive/log rotation. I have configured log_rotation_method=d and when it runs I see a SIGSEGV in the nagios.log and nagios shutsdown. I can move it to =h and it will do it every hour (crash). The logfile has nothing else to indicate why it is crashing. Anyone have suggestions on how to trace down the real problem here? File permissions on the archive dir are nagios:nagios as is the nagios.log file. -- Mike Wilson -- See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831iu=/4140/ostg.clktrk ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 0LE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831iu=/4140/ostg.clktrk ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Issues with check_openmanage documentation URLs
Hmm, Dell have changed the urls yet again... Seems to be no way to automagically determine the url from the product type - uk doc page for that server is: http://www.dell.com/support/Manuals/uk/en/ukdhs1/Product/poweredge-r210-2 Thanks very much, Dell :-( This will also affect check_esxi_hardware.py, which uses the same l;ogic as check_openmanage to produce documantation urls. Phil -Original Message- From: Nic Bernstein [mailto:n...@onlight.com] Sent: 20 June 2013 13:47 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Issues with check_openmanage documentation URLs Friends, We love the embedded URL option on the check_openmanage plugin, but it doesn't properly format them for models with trailing revision numbers, like the PowerEdge R210 II. The URL produced is of this form: http://support.dell.com/support/edocs/systems/per210%20ii/ when it should be: http://www.dell.com/support/Manuals/us/en/555/Product/poweredge-r210-2 I would just work up a patch, but it's obvious that this is in an entirely different branch of the Dell website, so before starting, I'm curious just where the original documentation URL schema was derived from? Cheers, -nic -- Nic Bernstein n...@onlight.com Onlight, Inc. www.onlight.com 219 N. Milwaukee St., Suite 2av. 414.272.4477 Milwaukee, Wisconsin 53202 -- This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 0LE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Log Rotations Issue
Hmm, does Nagios clean out old entries in retention.dat on a daily basis? And it's this process which is failing, and it's not log-related? I'm unlikeky to find any time to check the source in the immediate future, alas. Phil -Original Message- From: Alaric [mailto:paxindust...@gmail.com] Sent: 06 February 2013 15:43 To: Nagios Users List Subject: Re: [Nagios-users] Log Rotations Issue On Jan 31, 2013, at 12:53 PM, Randal, Phil phil.ran...@hoopleltd.co.uk wrote: I'm seeing the same issue here :-( Phil Phil, Stopping Nagios completely, and then flushing retention.dat worked for me. I stopped Nagios, NSCA, and NRPE, then did a cat retention.dat then restarted all of the nagios related services. (reloaded xinetd too which is where mk_livestatus runs for me) The following night, log rotations worked and Current status updated correctly. I have no real idea what this worked, but it did. I hope it helps you! -a -- Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Log Rotations Issue
I'm seeing the same issue here :-( Phil -Original Message- From: Alaric [mailto:paxindust...@gmail.com] Sent: 31 January 2013 15:57 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Log Rotations Issue Hi, I was hoping that someone on this list might have some insight to an issue that I recently ran into after upgrading my Nagios core installation to 3.4.4 (out of the EPEL Repo) After upgrading, log rotation stopped on one of my two servers, and perfdata_file_processing_commands stopped working, and whatever Job that sets 'CURRENT HOST STATE' in the main nagios logs stopped working. I upgraded both my Dev server, and my Production server, and only my Prod servers seems to have the issue. Both run the same code, and both have the same configs. I'm confident the configs as the same, as both get the configs deployed via puppet. I've googled around quite a bit, and haven't had any luck figuring it out. Has anyone seen anything similar? My feeling, based on the behavior of my Dev server is that it's not a problem with the code, but that something got stuck but I'm darned if I can figure out what. I've cleared out the logs, restarted nagios, rebooted the server. Audited configs and checked the debug output. Any help is much appreciated! -a -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 3.4.2 and PNP4Nagios
Just tried a build of 3.4.2 here, similar problem, nagios not actually performing checks. Nagios 3.4.2 with check_mk and pnp4nagios. I won't have time to investigate today, alas. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk From: Ismael Puerto [mailto:ismael.pue...@seres.es] Sent: 12 November 2012 12:57 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Nagios 3.4.2 and PNP4Nagios Hi list Today, I updated to Nagios Core from 3.4.1 to 3.4.2 but PNP4Nagios does not collect data. I restarted daemon PNP4Nagios without results. Thanks Best Regards -- Ismael Puerto Dpto de Explotación 902 42 43 42 ext: 213 ismael.pue...@seres.esmailto:ismael.pue...@seres.es [Conozca nuestra dirección en http://www.seres.es]http://www.seres.es/ Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addresses and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Ce message est prévu exclusivement pour son destinataire et peut contenir l'information qui est CONFIDENTIELLE et protégée par privilège professionnel. Si vous n'êtes pas le destinataire prévu on vous annonce par ceci que n'importe quelle diffusion, copie ou révélation de cette communication est strictement interdite par loi. Si ce message a été reçu par erreur, svp informez-immédiatement nous par l'intermédiaire du E-mail et supprimez-les. P Respeta el medio ambiente. Antes de imprimir este e-mail, piensa si realmente es necesario imprimirlo. Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. inline: image001.jpginline: image002.jpg-- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check_openmanage and ESXi
You get more reported back from check_esxi_hardware.py if the check detects any error conditions. I did a lot of work on this last year, see my blog post about it for example output when things don't work: http://www.rebee.clara.net/blog/archives/2011/04/entry_185.html Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Hölzel, Arnold [mailto:arnold.hol...@kpn.com] Sent: 16 August 2012 16:00 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] check_openmanage and ESXi All, I don't know if anyone else already posted this, I just joined the mail list. We have been using check_openmanage (brilliant piece of work!) to check the hardware status of our Dell machines, lately we are moving from ESX 4 to ESXi 5 and found that the check_openmanage check could not help us with the monitoring of ESXi 5 hardware, because check_openmanage needs OMSA for its checks. Today I found a other plugin to check ESXi hardware, see http://www.claudiokuenzler.com/nagios-plugins/check_esxi_hardware.php There is one disadvantage to this plugin and that is that you always get the same status details back with a OK. I don't know if it is possible but it would be nice to have the checks from the check_esxi_hardware available in the check_openmanage, only problem is one is written in Python the other in Perl... I hope it helps and that maybe someone (Trond the author of check_openmanage?) can create one check of this. Met vriendelijke groet/with kind regards, Arnold Hölzel Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Installing n2rrd with Nagios on Centos 6.2
Can't help but think that using pnp4nagios would be easier :-) Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: nelson [mailto:tnels...@comcast.net] Sent: 20 July 2012 08:30 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Installing n2rrd with Nagios on Centos 6.2 I am in the process of building a Centos 6.2 system to run Nagios and n2rrd. It is a virtual machine / sandbox. Centos 6.2 is installed as is Nagios 3.4.1 and Nagios Plugins 1.4.15. Nagios and the Nagios Plugins were installed following the Fedora Quick Start instructions at http://nagios.sourceforge.net/docs/3_0/quickstart-fedora.html Nagios was started and I was able to access the Nagios web pages on Apache successfully. It is the basic, just after installation, configuration, but it tells me it is working. The next step was to download and install n2rrd. I downloaded nagios-n2rrd- 1.4.5-1.src.rpm, and started following the instructions at http://n2rrd- wiki.diglinks.com/display/n2rrd/RPM+Source to perform the install. Step 2 rpm -i nagios-n2rrd-1.4.5-1.src.rpm created /root/rpmbuild/SPECS, SOURCES, etc. Step3 and 4 verify the PATHs for ../SPECS/n2rrd.spec and ../SOURCES/... Step 5 executes the rpmbuild -ba /root/rpmbuild/SPECS/n2rrd.spec My first attempt at rpmbuild revealed that I had some problems with some PATHs specified in n2rrd.spec. Nagios is installed entirely in /usr/local/nagios. No problem, now that I know. I made the appropriate (I believe) changes to n2rrd.spec: #nagios related %define nagios_conf_dir /usr/local/nagios/etc %define nagios_data_dir /usr/local/nagios/share %define nagios_lib_dir/usr/local/nagios %define nagios_log_dir/usr/local/nagios/var I'll admit I guessed on the nagios_lib_dir. I fired up a Nagios installation I had on Fedora 14 to compare directory structures and defining it as /usr/local /nagios did not seem unreasonable. I kicked off the rpmbuild -ba /root/rpmbuild/SPECS/n2rrd.spec again and the messages look a bit better. Near the end of the output, I am seeing the following: Processing files: nagios-n2rrd-1.4.5-1.noarch Provides: config(nagios-n2rrd) = 1.4.5-1 Requires(interp): /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) = 3.0.4-1 rpmlib(FileDigests) = 4.6.0-1 rpmlib(PayloadFilesHavePrefix) = 4.0-1 Requires(post): /bin/sh Requires: /usr/bin/perl perl(Getopt::Std) perl(IO::Socket) perl(RRDs) perl(strict) perl(vars) Processing files: nagios-n2rrd-rrd2graph-1.4.5-1.noarch Provides: config(nagios-n2rrd-rrd2graph) = 1.4.5-1 Requires(rpmlib): rpmlib(CompressedFileNames) = 3.0.4-1 rpmlib(FileDigests) = 4.6.0-1 rpmlib(PayloadFilesHavePrefix) = 4.0-1 Requires: /usr/bin/perl perl(CGI) perl(File::Basename) perl(File::Find) perl(File::Temp) perl(RRDs) perl(strict) perl(vars) Checking for unpackaged file(s): /usr/lib/rpm/check-files /root/rpmbuild /BUILDROOT/nagios-n2rrd-1.4.5-1.i386 I believe the above messages are statements produced by the execution rather than errors. These statements are followed by some errors: error: Installed (but unpackaged) file(s) found: /etc/nagios/n2rrd.cfg /usr/share/nagios/css3menu/256base-save-over.png /usr/share/nagios/css3menu/256subdown.png /usr/share/nagios/css3menu/256subdown1.png /usr/share/nagios/css3menu/EPS.png . . . /usr/share/nagios/css3menu/zoom-graph.png /usr/share/nagios/css3menu/zoom.png RPM build errors: Installed (but unpackaged) file(s) found: /etc/nagios/n2rrd.cfg /usr/share/nagios/css3menu/256base-save-over.png /usr/share/nagios/css3menu/256subdown.png . . . /usr/share/nagios/css3menu/zoom-graph.png /usr/share/nagios/css3menu/zoom.png My questions are: 1 - Can someone confirm the above messages (Requires...) are statements rather than errors? 2 - What did I do wrong to generate the 'Installed (but unpackaged) file(s) found:' errors? 3 - Is there some 'big picture' item or bit of knowledge that I am missing that caused me to make these errors? Yes, I am beyond the limit of my expertise here. Any thoughts or comments would be welcomed, even 'this is the wrong place for this message.' Thank you. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting
Re: [Nagios-users] Help with OCP_daemon and distributed monitoring
Check out Bug 247 http://tracker.nagios.org/view.php?id=247 The attached patch should fix the issue. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: James Fillman [mailto:jfill...@central1.com] Sent: 12 July 2012 18:57 To: 'nagios-users@lists.sourceforge.net' Subject: [Nagios-users] Help with OCP_daemon and distributed monitoring I've got a large distributed Nagios installation that uses the OCP_daemon to handle the forwarding of passive service checks to the master server. I've recently upgraded from version 3.0.3 to 3.4.1. After the upgrade, I've found a serious problem that I haven't completely solved yet. When using the OCP_daemon, you configure Nagios to forward passive check results by having it write performance data to a named pipe. While on version 3.0.3, all passive check results where being where being written to the perf data named pipe regardless of whether there was performance data or not. Since the upgrade to 3.4.1, check data only gets written to the pipe if the plugin generates perf data. I need all check results, regardless of state to be written to the pipe and forwarded on to the master. Has anyone else encountered this issue and what was the solution. Here's the relevant config: # Enable Performance data processing. process_performance_data=1 # Files to which Nagios will write data. In this setup # they will be named pipes. #host_perfdata_file=/path/to/host-perfdata.fifo service_perfdata_file=/var/log/nagios/rw/service-perfdata.fifo # This is exactly what will be sent to send_NSCA. Do not change it. host_perfdata_file_template=$HOSTNAME$\t$HOSTSTATEID$\t$HOSTOUTPUT$|$HOSTPERFDATA$ service_perfdata_file_template=$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATEID$\t$SERVICEOUTPUT$|Data: $SERVICEPERFDATA$ # The write mode should be w, although append should have no effect on a named pipe. host_perfdata_file_mode=p service_perfdata_file_mode=p # We don't want to process any command, so set this to 0 host_perfdata_file_processing_interval=0 service_perfdata_file_processing_interval=0 Thanks, --james Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Large scale installation
What's the spec of your nagios server? We're checking (around) 500 hosts, 4500 active, 5000 passive service with Nagios 3.4.1 in a CentOS 5.8 VM with 2GB RAM, 4 vCPUs, without problems with the help of check_mk /mk_livestatus (http://mathias-kettner.de/check_mk.html) Also using pnp4nagios and rrdcached and ramdisk for checkresults. Large installation config tweaks, and tuning the check result reaper frequency all help even out the load. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Andreas Brandino [mailto:ampra...@gmail.com] Sent: 10 June 2012 13:39 To: Nagios-users@lists.sourceforge.net Subject: [Nagios-users] Large scale installation Hi all, my nagios installation has currently 400+ hosts and around 1400 checks. As the server load grows, delays are appearing. Is any way to move a part of active checks to a second nagios server? And in that case how will these two nagios servers exchange data? If this is feasible can you point me to some documentation? Thank you Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 3.4.1 keeps sending notifications for hosts and service(s) in scheduled shutdown time
Hi Andreas, In my limited testing it seems to work properly with the patch. I've just scheduled downtime for a host, rebooted it, and restarted Nagios when it was down. No notifications were resent here after the Nagios restart. Cheers, Phil -Original Message- From: Andreas Ericsson [mailto:a...@op5.se] Sent: 05 June 2012 10:19 To: Nagios Users List Subject: Re: [Nagios-users] Nagios 3.4.1 keeps sending notifications for hosts and service(s) in scheduled shutdown time On 06/05/2012 08:24 AM, Mark Elsen wrote: On Mon, Jun 4, 2012 at 1:48 PM, Randal, Philphil.ran...@hoopleltd.co.ukwrote: Does the patch in http://tracker.nagios.org/view.php?id=338 fix the issue (notifications during scheduled downtime) for you? Cheers, Phil Initial testing seems to indicate that it does. I'm looking at that patch now and intend to apply it (or some other version of it) to the core. One question though: The original return early patch was meant to fix a problem where contacts were being re-notified of downtime when Nagios restarted in the middle of a downtime period. Is that problem still fixed with the patch found in the issue tracker? -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Plugin to Monitor Network Interface
If you've SNMP enabled on your servers, easiest way is via check_iftraffic3.pl It would help if you specified which operating system(s) the monitored box(es) run(s). Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: vishesh kumar [mailto:linuxtovish...@gmail.com] Sent: 31 May 2012 11:57 To: Nagios Users List Subject: [Nagios-users] Plugin to Monitor Network Interface Hi Members, I want to set php4nagios to display input/output graph via nagios . I need your suggestion on what plugin i should use to monitor network traffic on a particular interface . Thanks Vishesh Kumar Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Data Visualization in Nagios
You don't have to do anything on your remote system. If your nagios checks are returning performance data they'll automatically be graphed. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: vishesh kumar [mailto:linuxtovish...@gmail.com] Sent: 30 May 2012 12:08 To: Nagios Users List Subject: Re: [Nagios-users] Data Visualization in Nagios Thanks to all, pnp4nagios is really amazing. I installed pnp4nagios and its working great . On http://localhost/php4nagios page i can see multiple graphs for localhost . Now i want similar graphs for my remote system , so should i need to install pnp4nagios on remote system as well . I am able to monitor network services via nrpe , so what i should do to get graphs for remote system as well. Thanks On Tue, May 29, 2012 at 1:31 PM, ranjib dey dey.ran...@gmail.commailto:dey.ran...@gmail.com wrote: pnp4nagios Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Data Visualization in Nagios
I'd also add mk_livestatus and rrdcached into the mix with pnp4nagios. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Paul Dubuc [mailto:w...@paul.dubuc.org] Sent: 29 May 2012 15:24 To: Nagios Users List Subject: Re: [Nagios-users] Data Visualization in Nagios I recommend PNP4Nagios, especially if you have a large quantity of data and services to graph. The installation options offer better scalability than NagiosGraph. vishesh kumar wrote: Hi Members, I want to present nagios data in graphics . What should i use for simple for network traffic , disk usage etc in simple graphics . I worked on cacti but i don't know how to integrate it with Nagios . On google searching ,I found NagiosGraph as one of the option . What you suggest ? N Thanks -Vishesh -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Perfdata problem
That older perfdata problem is here: http://tracker.nagios.org/view.php?id=247 Patch (untested) to always process perfdata (removing the early exits): --- nagios/xdata/xpddefault.c 2012-02-07 10:15:02.0 + +++ nagios/xdata/xpddefault.c 2012-05-16 16:48:44.0 +0100 @@ -382,6 +382,7 @@ * bail early if we've got nothing to do so we don't spend a lot * of time calculating macros that never get used */ + /* if(!svc || !svc-perf_data || !*svc-perf_data) { return OK; } @@ -389,6 +390,7 @@ return OK; } + */ /* * we know we've got some work to do, so grab the necessary * macros and get busy @@ -423,12 +425,14 @@ * bail early if we've got nothing to do so we don't spend a lot * of time calculating macros that never get used */ + /* if(!hst || !hst-perf_data || !*hst-perf_data) { return OK; } if((!xpddefault_host_perfdata_fp || !xpddefault_host_perfdata_file_template) !xpddefault_host_perfdata_command) { return OK; } + */ /* set up macros and get to work */ memset(mac, 0, sizeof(mac)); Icinga's solution was to add two new config variables: https://dev.icinga.org/issues/1413 Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Andreas Ericsson [mailto:a...@op5.se] Sent: 16 May 2012 13:37 To: Nagios Users List Subject: Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed) On 05/15/2012 03:49 PM, Dennis Kuhlmeier wrote: Hi Phil, On 15.05.12 15:24, Randal, Phil wrote: Hi Dennis, Can you check out Nagios 3.4.1 and see if this fixes the problem? sorry for not checking prior to posting. Anyway, I built the new version, btw., why can't you just build the RPM from the tar? This is what I had to do on RHEL5: # tar xzf nagios-3.4.1.tar.gz # mv nagios nagios-3.4.1 # cd nagios-3.4.1 # vim nagios.spec change datarootdir to datadir in configure statement # cd .. # tar czf nagios-3.4.1.tar.gz nagios-3.4.1/ # rpmbuild -tb nagios-3.4.1.tar.gz Tada, build works. Back to the problem. Installed the update, doesn't help. On my sample host with 31 checks only 18 get submitted via Perfdata. Back to nagios-3.2.3 again and all 31 checks are processed. Please tell me if you need any more details, performance data template configuration or something like that. This is a slightly older bug about perfdata not being processed when there is no perfdata. I'll see if I get time to take a look at it. -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users
Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed)
Hi Dennis, Can you check out Nagios 3.4.1 and see if this fixes the problem? Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Dennis Kuhlmeier [mailto:kuhlme...@riege.com] Sent: 15 May 2012 13:54 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed) Hi, sorry to burst into this, is this about the changed behaviour with quoted text? I was able to fix it in my check definitions (removing not needed quotes, etc.) in most cases, also using any kind of special character, e.g. | or * fixes this, but I am still unable to pass check results to a remote Nagios instance by sending them via NSCA. I use perfdata processing for this and only check results with special characters (all checks that do actually have performance data fulfill this as they all contain the pipe character) are processed, others never even show up in my definied service_perfdata_file! Switched backed to Nagios 3.2.3 and everything works like a charm. Are both problems connected and fixed in an upcoming 3.4 release? Regards, Dennis On 14.05.12 11:31, Randal, Phil wrote: Hi Andreas, Yours is probably the safest approach. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Andreas Ericsson [mailto:a...@op5.se] Sent: 14 May 2012 00:17 To: Nagios Users List Cc: Randal, Phil Subject: Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed) On 05/13/2012 10:44 PM, Randal, Phil wrote: I've uploaded a patch to http://tracker.nagios.org/view.php?id=332 Which fixes the double quote issue and my original compile problem. Thanks. The double-quote issue has been resolved by reverting the faulty patch though. I'll see if I get time to take a look at the compile problem tomorrow. -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263
Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed)
Hi Dennis, I'm just a user, not a developer. All I can suggest is raisng a bug on http://tracker.nagios.org Or two bugs, so the RPM spec file gets fixed :-) Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Dennis Kuhlmeier [mailto:kuhlme...@riege.com] Sent: 15 May 2012 14:49 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed) Hi Phil, On 15.05.12 15:24, Randal, Phil wrote: Hi Dennis, Can you check out Nagios 3.4.1 and see if this fixes the problem? sorry for not checking prior to posting. Anyway, I built the new version, btw., why can't you just build the RPM from the tar? This is what I had to do on RHEL5: # tar xzf nagios-3.4.1.tar.gz # mv nagios nagios-3.4.1 # cd nagios-3.4.1 # vim nagios.spec change datarootdir to datadir in configure statement # cd .. # tar czf nagios-3.4.1.tar.gz nagios-3.4.1/ # rpmbuild -tb nagios-3.4.1.tar.gz Tada, build works. Back to the problem. Installed the update, doesn't help. On my sample host with 31 checks only 18 get submitted via Perfdata. Back to nagios-3.2.3 again and all 31 checks are processed. Please tell me if you need any more details, performance data template configuration or something like that. Cheers, Phil Regards, Dennis -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed)
Hi Andreas, Yours is probably the safest approach. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk -Original Message- From: Andreas Ericsson [mailto:a...@op5.se] Sent: 14 May 2012 00:17 To: Nagios Users List Cc: Randal, Phil Subject: Re: [Nagios-users] Nagios 3.4.0 double quote in command bug (fixed) On 05/13/2012 10:44 PM, Randal, Phil wrote: I've uploaded a patch to http://tracker.nagios.org/view.php?id=332 Which fixes the double quote issue and my original compile problem. Thanks. The double-quote issue has been resolved by reverting the faulty patch though. I'll see if I get time to take a look at the compile problem tomorrow. -- Andreas Ericsson andreas.erics...@op5.se OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 Considering the successes of the wars on alcohol, poverty, drugs and terror, I think we should give some serious thought to declaring war on peace. “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Nagios 3.4.0 double quote in command bug (fixed)
I've uploaded a patch to http://tracker.nagios.org/view.php?id=332 Which fixes the double quote issue and my original compile problem. Cheers, Phil Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 3.4.0 complilation error (and trivial fix)
I should have mentioned that that error only occurs if you try to compile Nagios 3.4.0 with embedded perl support. There's also no guarantee that it'll work properly even with that patch. I had problems check_mk with Nagios 3.4.0, but unfortunately, I haven't got the time or test environment to get to the bottom of it. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Ismael Puerto [mailto:ismael.pue...@seres.es] Sent: 09 May 2012 12:21 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Nagios 3.4.0 complilation error (and trivial fix) Thanks Phill On 05/08/2012 04:03 PM, Randal, Phil wrote: Hi folks, Trying to compile nagios 3.4.0 gave me this error: checks.c: In function 'run_async_service_check': checks.c:714:5: error: 'temp_buffer' undeclared (first use in this function) Patch to fix the compilation error is: --- nagios/base/checks.c2012-05-08 14:36:02.0 +0100 +++ nagios/base/checks.c2012-05-08 14:35:45.0 +0100 @@ -469,6 +469,7 @@ double old_latency = 0.0; dbuf checkresult_dbuf; int dbuf_chunk = 1024; + char *temp_buffer; #ifdef USE_EVENT_BROKER int neb_result = OK; #endif Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.netmailto:Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 3.4.0 complilation error (and trivial fix)
I wouldn't rush to deploy Nagios 3.4.0 until this nasty bug's fixed: http://tracker.nagios.org/view.php?id=332 Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Randal, Phil [mailto:phil.ran...@hoopleltd.co.uk] Sent: 09 May 2012 16:16 To: Nagios Users List Subject: Re: [Nagios-users] Nagios 3.4.0 complilation error (and trivial fix) I should have mentioned that that error only occurs if you try to compile Nagios 3.4.0 with embedded perl support. There's also no guarantee that it'll work properly even with that patch. I had problems check_mk with Nagios 3.4.0, but unfortunately, I haven't got the time or test environment to get to the bottom of it. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk From: Ismael Puerto [mailto:ismael.pue...@seres.es] Sent: 09 May 2012 12:21 To: nagios-users@lists.sourceforge.netmailto:nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Nagios 3.4.0 complilation error (and trivial fix) Thanks Phill On 05/08/2012 04:03 PM, Randal, Phil wrote: Hi folks, Trying to compile nagios 3.4.0 gave me this error: checks.c: In function 'run_async_service_check': checks.c:714:5: error: 'temp_buffer' undeclared (first use in this function) Patch to fix the compilation error is: --- nagios/base/checks.c2012-05-08 14:36:02.0 +0100 +++ nagios/base/checks.c2012-05-08 14:35:45.0 +0100 @@ -469,6 +469,7 @@ double old_latency = 0.0; dbuf checkresult_dbuf; int dbuf_chunk = 1024; + char *temp_buffer; #ifdef USE_EVENT_BROKER int neb_result = OK; #endif Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.ukmailto:phil.ran...@hoopleltd.co.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.netmailto:Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Nagios 3.4.0 complilation error (and trivial fix)
Hi folks, Trying to compile nagios 3.4.0 gave me this error: checks.c: In function 'run_async_service_check': checks.c:714:5: error: 'temp_buffer' undeclared (first use in this function) Patch to fix the compilation error is: --- nagios/base/checks.c2012-05-08 14:36:02.0 +0100 +++ nagios/base/checks.c2012-05-08 14:35:45.0 +0100 @@ -469,6 +469,7 @@ double old_latency = 0.0; dbuf checkresult_dbuf; int dbuf_chunk = 1024; + char *temp_buffer; #ifdef USE_EVENT_BROKER int neb_result = OK; #endif Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Monitor Directory (Folders) Size with NSClient++
GetFileSize works for me using backslashes and not forward slashes. Try using \ or \\ instead of / in the path. e.g. d:\\Network Shares\\individual\\*.* This might be a bug in NSClient++ and/or its documentation. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Jorge Pañeda [mailto:jlpan...@sciodev.com] Sent: 07 March 2012 16:49 To: 'Nagios Users List' Subject: [Nagios-users] Monitor Directory (Folders) Size with NSClient++ Hello all, I'm using NSClient++ 0.3.9, nsca and passive checks to monitor my Windows server behind a firewall. In one of this servers I have a folder that inside have many other folders and files, I want to monitor this folder and let Nagios send me a warning or critical notification when the size of this folder grows too much (Ex. Folder Size 50 GB, warning when is over 70 GB and critical when is over 80 GB). I tried to accomplish this using CheckFileSize and CheckDriveSize but not succeeded at all. When I use CheckFileSize like this: alias_individual=CheckFileSize ShowAll MaxWarn=60G MaxCrit=70G File:_Individual=d:/Network Shares/individual/*.* I got that the result is ok but 0 Bytes. I even got the same result if I eliminate the *.* at the end of the path. [cid:image002.png@01CCFC8C.DE38D7F0] When CheckDriveSize is used: alias_individual=CheckDriveSize MaxWarn=60G MaxCrit=70G ShowAll=long Drive=\\servername\\individual I got the size but this size is the size of all the Hard Disk and not the size of the folder. Hope you can help me to solve this issue or give any ideas to accomplish the monitoring of size folders. Thanks in advance. Jorge L. Pañeda [Description: Description: scio] Systems Administrator Scio Consulting | IT Infrastructure Dept. Las Cañadas 501 Int. 230 Col. Tres Marías Morelia, Mich., México Tel. (443) 310-96-01 y (443) 310-96-02 ext. 402 U.S. Phone: 408 404 3897 Ext. 402 www.sciodev.comhttp://www.sciodev.com/ Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. inline: image002.pnginline: image003.jpg-- Virtualization Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Eventlog monitoring through NSClient++
I'm using check_mk to monitor eventlogs (and do other good things). http://mathias-kettner.de/checkmk.html Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: Mark Elsen [mailto:mark.el...@gmail.com] Sent: 24 February 2012 16:32 To: Nagios Users List Subject: Re: [Nagios-users] Eventlog monitoring through NSClient++ On Fri, Feb 24, 2012 at 4:11 PM, MAD m...@b-care.netmailto:m...@b-care.net wrote: Hi list, I was trying to monitor events on a Windows server through the CheckEventLog functionnality built in NSClient++. I didn't notice first while I was adding my checks but memory usage and cpu load started raising as I was asking for more and more checks. When I finished adding my 40 rules, my server crashed because of lack of memory. Have someone already seen something similar ? What other tool may I use to check large amounts of events on windows boxes without making them crashes ? I'm using check_nrpe v2.12 and NSClient++ v0.3.9 - Checkwmiplus can also query evenlogs , it may perform better (or not) : http://www.edcint.co.nz/checkwmiplus/ M. Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Virtualization Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Plugin to monitor bandwidth usage
I enable SNMP on our servers and use check_iftraffic3l to monitor them. One of the later check_ iftraffic variations might work for you too. http://exchange.nagios.org/directory/Plugins/Network-Connections%2C-Stats-and-Bandwidth/page2 Cheers, Phil From: Serge Dukic [mailto:serge.du...@orionhealth.com] Sent: 14 February 2012 22:22 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Plugin to monitor bandwidth usage Hi, I've got some strange issues with a web application, where it loses connectivity at a certain time each night. After a bit of investigation, I think that this might be related to network congestion. i.e. the backups are taking up all of the available bandwidth and as a result the web app connections time out. I'd like to use a plugin to monitor the amount of bandwidth which is being used by the server as a whole to see if it is ever saturated. e.g. if bandwidth remains at 90% of 1Gb/s send a warning Does anyone know of a plugin which would allow me to monitor this? Thank you Serge “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Virtualization Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Monitoring clustered services
One solution to that problem is to use Mathias Kettner's check_mk and use its clustered service support: http://mathias-kettner.de/checkmk_clusters.html That's what I do here. Another alternative is to create a third 'host' in Nagios representing the cluster and monitor the services on that, and not on the 'physical' boxes. Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 From: Kumar, Ashish [mailto:xml.de...@gmail.com] Sent: 12 October 2011 14:04 To: nagios-users ML Subject: [Nagios-users] Monitoring clustered services Hello fellow Nagios users, I have configured a couple of hosts in Nagios, since they are the nodes of a HA cluster the services are running on the active host only. As obvious Nagios is showing the services down on the passive host. I tried using check_cluster and check_cluster2 but due to the lack of information around the web and mailing list archives I couldn't figure out how it can be configured. Would anyone actually using check_cluster like to lend me a hand? :) We are using Nagios Core 3.2.0 on Centos. Thanks, Ashish Kumar -- All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2d-oct___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] What the best way to monitor Windows?
I use Nsclient++ and check_mk_agent, coupled with pnp4nagios http://mathias-kettner.de/checkmk.html Getting check_mk to work the way you want takes a bit of effort, but once you're used to it there's no turning back. Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 From: Toonz IT [mailto:it.to...@gmail.com] Sent: 04 August 2011 12:09 To: Nagios Users List Cc: Sandra Bonus Subject: Re: [Nagios-users] What the best way to monitor Windows? NSClient++ works fine us too with custom commands like these you can monitor disk space usages alsowhich was one of the main requirements for us! define service{ use generic-service host_name srv_storage-01 service_description Disk Space F Drive check_command check_nt!USEDDISKSPACE!-l f -w 80 -c 90 } You get a warming alert at 80% disk full and a critical alert 90% regards Ananth. On Thu, Aug 4, 2011 at 1:28 PM, Rai Ricafrente maill...@ricafrente.commailto:maill...@ricafrente.com wrote: I've got a Nagios installation all up and running and working just fine. Now I have to start monitoring some Windows Servers. There are so many different plugins. What are the recommendations for doing this? We have some Win Server 2003, 2008 as well as Exchange and SQL. Thanks NSClient++ worked fine for us. -- BlackBerryreg; DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos much more. Register early save! http://p.sf.net/sfu/rim-blackberry-1 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.netmailto:Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- BlackBerryreg; DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos much more. Register early save! http://p.sf.net/sfu/rim-blackberry-1___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
[Nagios-users] Problems with exchange.nagios.org
Looks like the backend's fallen over. When trying to download a plugin: Database Error: Unable to connect to the database:Could not connect to MySQL Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 -- What Every C/C++ and Fortran developer Should Know! Read this article and learn how Intel has extended the reach of its next-generation tools to help Windows* and Linux* C/C++ and Fortran developers boost performance applications - including clusters. http://p.sf.net/sfu/intel-dev2devmay___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] enable SNMP trap handling in Nagios
I'll second that. The documentation's a bit sparse for nagtrap, and overwhelming at times for snmptt, but you'll eventually get there. Installed both last night without too much hassle. Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 From: Marco Tirado [mailto:marco.tir...@gmail.com] Sent: 11 May 2011 08:50 To: nagiosus...@edcint.co.nz; Nagios Users List Subject: Re: [Nagios-users] enable SNMP trap handling in Nagios Hello: Going back to the original question of the thread, if you want to enable trap handling in Nagios you should look at nagtap and snmptt. http://www.nagtrap.org/doku.php/en:start http://snmptt.sourceforge.net/ BR Marco Tirado On Wed, May 11, 2011 at 9:35 AM, Matthew Jurgens nagiosus...@edcint.co.nzmailto:nagiosus...@edcint.co.nz wrote: On 11/05/2011 2:46 AM, khurram aziz wrote: Hi, i am using Nagios 3.2.3 want to enable SNMP Trap Handling so that I can check uptime of my servers ( snmp service has already been enabled on the servers). can sum1 help me with the configuration. If it is for Windows servers you can use the check_wmi_plus plugin from Nagios Exchange to check against uptime http://exchange.nagios.org/directory/Plugins/Operating-Systems/Windows/WMI/Check-WMI-Plus/details -- Smartmon System Monitoringhttp://www.smartmon.com.au www.smartmon.com.auhttp://www.smartmon.com.au -- Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay ___ Nagios-users mailing list Nagios-users@lists.sourceforge.netmailto:Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. You should be aware that Herefordshire Council monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check_openmanage errors
Hi Trond, Is the beta of check_openmanage.php available for testing? I'm currently using a slightly modified version of the one in the latest PNP release. Two cosmetic issues came to mind: 1: Temperature is measured in Celsius, not Celcius 2: Formatting when reporting multiple sensors in one graph is irksome - the values don't align in a nice column (e.g. temperatures). I 'solve' this by a judicious use of substr() and str_pad() to normalise the length of reported sensor names. Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 -Original Message- From: Trond Hasle Amundsen [mailto:t.h.amund...@usit.uio.no] Sent: 28 April 2011 10:57 To: Nagios Users List Subject: Re: [Nagios-users] check_openmanage errors Steve Glasser sglas...@visp.net writes: That combination should work just fine. Please try either of the beta versions, as I suggested in my previous email. The issue you're having may very well be fixed in the betas. Tried check_openmanage-3.7.0-beta2.0-beta2, problem solved. Excellent, thanks for testing and reporting back. I've just released versjon 3.6.6, which contains the same bugfixes as the 3.7 beta, but not the (unfinished) new features :) Cheers, -- Trond H. Amundsen t.h.amund...@usit.uio.no Center for Information Technology Services, University of Oslo -- WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios alert via Twitter - authorization issue
I haven't tested this myself yet, but take a look at this solution which uses OAuth authentication: http://0wned.it/2010/10/07/tweeting-alerts-from-nagios/ Cheers, Phil -- Phil Randal | Infrastructure Engineer NHS Herefordshire Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 -Original Message- From: John Antram [mailto:r...@dvdmenus.net] Sent: 11 October 2010 16:29 To: Nagios Users List Subject: [Nagios-users] Nagios alert via Twitter - authorization issue Hello everyone! Before I attempt to re-invent the wheel with getting curl:// command lines to authenticate to the new twitter API, has anyone solved it? I'm in the middle of moving part of our network to our new building and just noticed I don't have any tweet-ed alerts since they put the security on the API. My command looks like this in command.cfg: define command { command_namehost-notify-by-twitter command_line/usr/bin/curl --basic --user user:password --data-ascii status=[Nagios] $HOSTSTATE$ alert for $HOSTNAME$ at $SHORTDATETIME$ http://twitter.com/statuses/update.json /dev/null } Thanks everyone! John Antram r...@dvdmenus.net Subatomic Digital Essex/Williston Vermont www.dvdmenus.net -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. You should be aware that Herefordshire Council monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check for the absence of a service
http://nagiosplugins.org/man/negate -- Phil Randal | Networks Engineer Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 email: pran...@herefordshire.gov.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -Original Message- From: Kyle Dippery [mailto:k...@engr.uky.edu] Sent: 09 July 2009 16:08 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] check for the absence of a service Is there an easy way to use nagios to check for the absence of a service? I want to have nagios monitor SMTP and a few other services on hosts that aren't supposed to be running them, and tell me if they suddenly get turned on. Is there a plugin for this, or a way to trick an existing plugin to make it work? I suppose if nothing else I can write a wrapper for check_smtp or check_tcp to swap the OK and CRITICAL return values, but it'd be much easier if someone else has already done it... Cheers, Kyle -- Kyle Dippery Engineering Computing Services Phone: (859) 257-1346 280 FPAT 0046 Fax: (859) 323-3848 UK - One Great Place to Work -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] DNS down and false alerts...
Option 5: Install a local caching DNS server on your nagios box, and put 127.0.0.1 at the top of resolv.conf. Cheers, Phil -- Phil Randal | Networks Engineer Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 email: pran...@herefordshire.gov.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. From: Andrew Davis [mailto:ncc...@gmail.com] Sent: 09 June 2009 16:19 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] DNS down and false alerts... I've observed an interesting issue with Nagios. Our environment is a mix of UNIX, Linux, Apple, and Windows. The core of the network is Active Directory including two AD servers that are both our primary, internal DNS servers. All non-Windows systems have a resolv.conf that looks like: nameserver 10.1.1.13 nameserver 10.1.1.14 domain int.our.domain search int.our.domain About half of the servers have the nameserver entries inverted (ie: .14 first, .13 second). The issue is that anytime one of the nameservers is rebooted (at least once a month if staying current on patches thanks to Black Tuesdays), whichever hosts have that nameserver listed first in its resolv.conf start throwing the following errors: CRITICAL - Plugin timed out while executing system call. This occurs for multiple tests for each host. Obviously, there's a name resolution correlation here. If the nameserver with .13 is rebooted, all hosts (about half of them) that list this IP first in their resolve.conf then timeout for multiple tests. If the .14 server is rebooted, all the other hosts timeout. Interestingly, none of the Windows clients issue errors... only UNIX, Linux, and Mac's... only those with an /etc/resolv.conf. The end result is a host of false positives, but more importantly it looks bad on availability reports and causes phones/pagers to go ballistic with unneeded emails. I'm trying to find a solution and I can't find one that I like: Solution 1) is to cluster the DNS servers. We have lots of clusters here. This isn't good, though, as you don't normally cluster DNS servers... they're meant to be redundant for a reason... one fails and it uses the next one. Solution 2) is to setup a service/host dependency. My thought would be either a host dependency that says if either .13 or .14 are down, then don't alert for any other host that uses them. Or a service to host dependency... if the DNS service is down, then don't alert on any of these dependent hosts. Honestly, I'm not sure if you can mix host and service dependencies like this... plus... if the DNS server is actually down, then the DNS service is down, so better to use a host dependency. The problem is that now we're not alerting on any dependent hosts which themselves could have a legitimate issue we want to know about. Plus, what happens if the DNS server actually dies and take a few hours/days to rebuild/restore? At this point, the dependent hosts aren't watched for a very long time. Solution 3) is to setup a UNIX/Linux DNS server that slaves all zones from the AD servers and have all UNIX/Linux/Apple clients query from this server. This would work except that A) I need two of them to keep redundancy and B) I've now added an extra layer of complication to resolve an application (Nagios)... not exactly good practice. Solution 4) is to set the timeout value of a host querying a DNS server. Perhaps adjust the client to timeout on the first listed nameserver after only 10 seconds, then try the next one? Since most Nagios tests have a minimum timeout value of 30 seconds, if the first DNS query timed out after 10 seconds, it would go to the next one with, hopefully, enough time to respond. The downside is having to adjust every single server. Has anyone else seen this? Anyone else using Windows AD servers to provide DNS for *nix servers? -- A. Davis Email: ncc...@gmail.com There is no limit to what a man can accomplish if he doesn't care who gets the credit. - Ronald Reagan -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for
Re: [Nagios-users] HTTP and Web Form based Auth
Same here. I did have to apply this patch to get it to work properly with NTLM authentication: # diff -Naur webinject.pl /usr/local/webinject/webinject.pl --- webinject.pl2006-01-04 18:10:30.0 + +++ /usr/local/webinject/webinject.pl 2008-05-14 11:02:21.0 +0100 @@ -80,7 +80,7 @@ whackoldfiles(); #delete files leftover from previous run (do this here so they are whacked each run) #contsruct objects -$useragent = LWP::UserAgent-new; +$useragent = LWP::UserAgent-new(keep_alive=1); $cookie_jar = HTTP::Cookies-new; $useragent-agent('WebInject'); #http useragent that will show up in webserver logs $useragent-max_redirect('0'); #don't follow redirects for GET's (POST's already don't follow, by default) Cheers, Phil -Original Message- From: Petersen, Mark [mailto:mpeter...@gs1us.org] Sent: 28 May 2009 20:46 To: Aaron McKinnon; Nagios Users Mailinglist Subject: Re: [Nagios-users] HTTP and Web Form based Auth I use webinject - http://www.webinject.org/plugin.html. Mark -Original Message- From: Aaron McKinnon [mailto:mckin...@caltech.edu] Sent: Thursday, May 28, 2009 11:22 AM To: Nagios Users Mailinglist Subject: [Nagios-users] HTTP and Web Form based Auth How are folks checking site functionality with sites that use auth *other* than basic (apache) auth? I didn't find any plugins that support populating forms and posting. Thanks. -Aaron --- --- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] NRPE
Yes, You can do it without NRPE too. Install something like NSClient++ (http://www.nsclient.org) on the Vista host. http://www.nsclient.org/nscp/wiki/NSClientListener PROCSTATE is the one you want. I use a command check_nt_process: $USER1$/check_nt -H $HOSTADDRESS$ -p 1248 -v PROCSTATE -d SHOWALL -l $ARG1$ I use port 1248 (old nsclient port), NSClient++ defaults to port 12489. Cheers, Phil -- Phil Randal | Networks Engineer Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 email: pran...@herefordshire.gov.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. From: Eduardo Barreto [mailto:lec...@gmail.com] Sent: 19 May 2009 14:25 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] NRPE Hi All, I'm on a need to monitor a specific process on a Windows Vista desktop, is it possible through NRPE? Thanks in advance Eduardo Barreto -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] nagios upgrade
Is there any way you can clone your nagios box to a VM and test on the cloned box? I've just done that here testing for a planned 2.12 to 3.0.6 upgrade. You'll need to edit your nagios.cfg file to remove one obsolete option, and there are a few new options to merge in from the example nagios.cfg. I tested the worst-possible migration case - from self-compiled 2.12 to RPMForge-packaged 3.0.6 RPM. It was fun dealing with all the default directory changes, but not impossible. If you're compiling from source for both versions it should be a fairly painless migration. The side.html file is, as far as I remember, the same in both versions, so I think you can keep your old one and copy over the newly installed 3.0.6 version. My word, of course, is not gospel (and rarely is), so I'd advise you to test, test, and test again if you can. The directories which change depend on your config - a look at the paths specified in your nagios.cfg etc will point yopu in the right direction. (your logs might be in /var/log/nagios/, for example). Cheers, Phil -- Phil Randal | Networks Engineer Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 email: pran...@herefordshire.gov.uk Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. From: Anirudh Srinivasan [mailto:srianir...@gmail.com] Sent: 09 April 2009 14:29 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] nagios upgrade Hi I was planning to upgrade nagios from 2.9 to 3.0.6. We already have the pnp tool (performance graph at the side bar). My first question , while upgrading will the pnp tool get affected or messed up by any chance? I just want to be careful enough because nagios is one of our heavely used application. As a backup plan already the complete nagios is being backed up by the cron job. My second question : Can i know which directory is the one that is dynamic meaning that keeps on changing day by day. Let me list some of them here as far as i know: 1)nagios/etc 2)nagios/var If there is any can you please list them -- Anirudh Srinivasan -- This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Lilac 1.0 beta 1 released! The most robust Nagios3.x configuration tool available!
Shame it requires PHP 5.2. Any chance of re-engineering it so it works out of the box with a standard RedHat / CentOS 5.2 install? My past experience of the hassles of custom builds of PHP makes me very wary of going down that route again. Cheers, Phil -- Phil Randal | Networks Engineer Herefordshire Council | Deputy Chief Executive's Office | I.C.T. Services Division Thorn Office Centre, Rotherwas, Hereford, HR2 6JT Tel: 01432 260160 email: [EMAIL PROTECTED] Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Herefordshire Council. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. -Original Message- From: Taylor Dondich [mailto:[EMAIL PROTECTED] Sent: 10 December 2008 19:45 To: nagios-user Mailinglist Subject: [Nagios-users] Lilac 1.0 beta 1 released! The most robust Nagios3.x configuration tool available! Lilac 1.0 beta 1 is NOW released. Featuring a robust importer for importing existing Nagios 2.x and 3.x configurations, an exporter to export to Nagios 3.x and a robust Auto-Discovery system. Downloads and documentation at http://www.lilacplatform.com Thanks to everyone for their extensive testing of Alpha and filing bugs and suggestions. Beta 1 is *very* awesome. -- Taylor Dondich Check out Lilac, a configuration tool for Nagios 3 at http://www.lilacplatform.com Check out my Shortcut with O'Reilly Press: Network Monitoring with Nagios: http://oreilly.com/catalog/9780596528195/index.html -- SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix. com/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null -- SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Monitor web server run multiple virtual web site
I've recently done this. The details are in the Webinject forum here: http://www.webinject.org/cgi-bin/forums/YaBB.cgi?board=Development;actio n=display;num=1185818423 It works a treat. Cheers, Phil -- Phil Randal Networks Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Victor Lanza Sent: 05 June 2008 13:07 To: 'Marc Powell'; 'nagios Mailinglist' Subject: Re: [Nagios-users] Monitor web server run multiple virtual web site I will look into that.. Thanks! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marc Powell Sent: Wednesday, June 04, 2008 3:12 PM To: nagios Mailinglist Subject: Re: [Nagios-users] Monitor web server run multiple virtual web site On Jun 4, 2008, at 1:43 PM, Victor Lanza wrote: Yes, but this only works with those sites that use basic authentication..and as far as I understand, no one has been able to get the windows authentication to work with the check_http plugin.. check_http can only use basic auth. It's my understanding that WebInject can use NTLM though... This might be a helpful start -- http://www.webinject.org/plugin.html Google has more information as well. -- Marc - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Announce: Check_Yum for RedHat/CentOS serverpackagealerts
Oops, I realised after I said it. The only time I used yum on RHEL 4 was to upgrade it to CentOS 4. CentOS 4, of course, ships with yum. I've currently got 4 CentOS 4.6 boxes, 2 CentOS 5.1, and 1 RHEL 4 box, so python 2.3 support would still be a plus. Phil -- Phil Randal Networks Engineer Herefordshire Council Hereford, UK -Original Message- From: Hari Sekhon [mailto:[EMAIL PROTECTED] Sent: 01 May 2008 10:40 To: Randal, Phil Cc: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Announce: Check_Yum for RedHat/CentOS serverpackagealerts Randal, Phil wrote: The latest version now works fine on my CentOS 5.1 boxes. Now all we need is a version which works with python 2.3 so I can check our CentOS / RHEL 4 boxes. Cheers, Phil I have a couple of RHEL 4 boxes too but since they didn't ship with yum this didn't seem so relevant. I tried putting yum on one of them a couple of years back and I have to say it was an absolutely awful experience. I had done a relatively minimal install and was then tryied installing yum both by rpm and by source install, both of which landed me in a very bad and messed up circular dependency hell that I couldn't solve without breaking some other stuff. I mean I tried everything, and that was the last time I ever tried a minimal redhat installation (minimal == lower attack surface and all that best practice stuff which redhat never seemed to get into - otherwise I have to go round disabling so much junk on their systems), a very poor choice for tight control and maintainability compared to gentoo or debian (but I digress). Did you install yum manually on RHEL 4? Do you use this as the primary package management tool on RHEL 4 and does it receive security updates? I would have thought not since RedHat only shipped this in version 5 which is why the plugin makes no effort for previous versions of RHEL... but I could be wrong. I figure that upgrades to the version 5 with it's first half-decent package management system using yum by default will solve this, but if anyone wants to correct me or share their experience, feel free and I may reconsider. -h -- Hari Sekhon - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Announce: Check_Yum for RedHat/CentOS server packagealerts
# ./check_yum -vvv setting plugin timeout to 30 seconds running command: /usr/bin/yum --security check-update Returncode: '0' Output: 'Loading security plugin Loading priorities plugin Loading protectbase plugin Loading installonlyn plugin Loading dellsysidplugin plugin Setting up repositories Reading repository metadata in from local files Reducing city-fan.org repository for Red Hat Enterprise Linux (and clones) 5 (x86_64) to included packages only Finished Excluding Packages from Red Hat Enterprise 5 - RPMforge.net - dag Finished Reducing city-fan.org repository for Fedora Core Rawhide (x86_64) to included packages only Finished Limiting package lists to security relevant ones No packages needed, for security, 0 available 0 packages excluded due to repository priority protections 0 packages excluded due to repository protections ' Yum WARNING: Yum output signature does not match current known format, please make sure you have upgraded to the latest version of this plugin. If the problem persists, please contact the author for a fix Oh well, maybe one day it will work. :-p Phil -- Phil Randal Networks Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hari Sekhon Sent: 30 April 2008 13:46 To: Nagios Users mailinglist Subject: [Nagios-users] Announce: Check_Yum for RedHat/CentOS server packagealerts Hi, I've just released the Check_Yum plugin on NagiosExchange.org as the only one there seemed quite inadequate. Features of the new plugin (none of which are in the old plugin) include: - Differentiate between Security / normal package updates - Better output - numbers of packages updates - Support for extra Yum options including enabling and disabling repos, running from the cache - Optional Warning on non-security updates - Optional Critical alerting on any package - Timeout - Verbosity - Less false package alerts (the old plugin just used to misleading say the O/S needed updates when yum failed for any reason at all), including proper error feedback and a switch for lock handling to not raise an alert like if somebody is running yum interactively at the same time. You can download the plugin here: http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F2577.html;d= 1 (you may need to copy and paste that link if your mail client misinterprets the link) As ever, feedback is welcome, and development will continue if needed for extra switches and features. This should also work with Fedora or another RPM based distros that uses yum as it's package management system but I've not tested it outside RHEL/CentOS so feedback is welcome there too. On a related note, I'm also quite interested in people's experiences of updating and maintaining RedHat based systems especially with regards to security. I spoke to a few people and they basically don't follow security vulnerabilities and don't patch which ties in with my experiences and what I've seen of other people's systems too which is very disappointing. Hopefully this will make it easier to automatically track and keep on top of security updates for those of us who have RedHat Enterprise Linux 5 or later or equivalent. Thanks -h -- Hari Sekhon - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/j avaone ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Announce: Check_Yum for RedHat/CentOS serverpackagealerts
The latest version now works fine on my CentOS 5.1 boxes. Now all we need is a version which works with python 2.3 so I can check our CentOS / RHEL 4 boxes. Cheers, Phil -- Phil Randal Networks Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randal, Phil Sent: 30 April 2008 15:30 To: Hari Sekhon; Nagios Users mailinglist Subject: Re: [Nagios-users] Announce: Check_Yum for RedHat/CentOS serverpackagealerts # ./check_yum -vvv setting plugin timeout to 30 seconds running command: /usr/bin/yum --security check-update Returncode: '0' Output: 'Loading security plugin Loading priorities plugin Loading protectbase plugin Loading installonlyn plugin Loading dellsysidplugin plugin Setting up repositories Reading repository metadata in from local files Reducing city-fan.org repository for Red Hat Enterprise Linux (and clones) 5 (x86_64) to included packages only Finished Excluding Packages from Red Hat Enterprise 5 - RPMforge.net - dag Finished Reducing city-fan.org repository for Fedora Core Rawhide (x86_64) to included packages only Finished Limiting package lists to security relevant ones No packages needed, for security, 0 available 0 packages excluded due to repository priority protections 0 packages excluded due to repository protections ' Yum WARNING: Yum output signature does not match current known format, please make sure you have upgraded to the latest version of this plugin. If the problem persists, please contact the author for a fix Oh well, maybe one day it will work. :-p Phil -- Phil Randal Networks Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hari Sekhon Sent: 30 April 2008 13:46 To: Nagios Users mailinglist Subject: [Nagios-users] Announce: Check_Yum for RedHat/CentOS server packagealerts Hi, I've just released the Check_Yum plugin on NagiosExchange.org as the only one there seemed quite inadequate. Features of the new plugin (none of which are in the old plugin) include: - Differentiate between Security / normal package updates - Better output - numbers of packages updates - Support for extra Yum options including enabling and disabling repos, running from the cache - Optional Warning on non-security updates - Optional Critical alerting on any package - Timeout - Verbosity - Less false package alerts (the old plugin just used to misleading say the O/S needed updates when yum failed for any reason at all), including proper error feedback and a switch for lock handling to not raise an alert like if somebody is running yum interactively at the same time. You can download the plugin here: http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F2577.html;d= 1 (you may need to copy and paste that link if your mail client misinterprets the link) As ever, feedback is welcome, and development will continue if needed for extra switches and features. This should also work with Fedora or another RPM based distros that uses yum as it's package management system but I've not tested it outside RHEL/CentOS so feedback is welcome there too. On a related note, I'm also quite interested in people's experiences of updating and maintaining RedHat based systems especially with regards to security. I spoke to a few people and they basically don't follow security vulnerabilities and don't patch which ties in with my experiences and what I've seen of other people's systems too which is very disappointing. Hopefully this will make it easier to automatically track and keep on top of security updates for those of us who have RedHat Enterprise Linux 5 or later or equivalent. Thanks -h -- Hari Sekhon - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/j avaone ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/j avaone ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages
Re: [Nagios-users] NSClient - ERROR: PDH Collection thread not running.
Upgrade to NSClient++ 0.3.1 and try again. Cheers, Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Borsani Sent: 13 March 2008 16:04 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] NSClient - ERROR: PDH Collection thread not running. Hi all ! I am using NSClient++ 0.2.7 Yesterday, for the first time, I receive following error: NSClient - ERROR: PDH Collection thread not running. I read that sometime happens for language problems, but my server has an english version ... After the agent rebooting , the problem stop. Any idea ? Regards Marco Borsani Technical Operation tel.:+390104310115 e-fax: +390683175950 * [EMAIL PROTECTED] ITnet S.r.l. Direzione e Coordinamento di Weather Investments S.p.A. Via Pacinotti, 39 16151 - Genova In ottemperanza al D. lgs 196/03 in materia di protezione dei dati personali, le informazioni contenute in questo messaggio sono strettamente riservate e sono esclusivamente indirizzate al destinatario indicato (oppure alla persona responsabile di rimetterlo al destinatario). Qualsiasi uso, riproduzione o divulgazione di questo messaggio è vietata. Nel caso in cui aveste ricevuto questa mail per errore, Vi invitiamo ad avvertire il mittente al più presto a mezzo posta elettronica e distruggere il messaggio erroneamente ricevuto. According to Italy's new data protection code (Legislative Decree no. 196/2003) in force on January 1st 2004, Italian Law 196/03 concerning privacy, the information contained in this e-mail is confidential and is intended for the addressee only. If you are not the correct recipient, please note that any use, dissemination or copy of this document/information is strictly prohibited.If you have received this message in error, you should destroy it and please notify us immediately by e-mail. - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Nagios 2.11 changelog
The new download page is vile! Bring back the old one! Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Giles Coochey Sent: 12 March 2008 14:16 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] Nagios 2.11 changelog I see 2.11 is released... Has anyone worked out how to get to the Changelog, since the Nagios.org site changed the download pages? -- --- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check-nt Windows 2003 Server
Nobody told my Windows 2003 servers that! pnsClient.exe works fine on Win 2003. If you're on SP1, disable DEP for pnsclient.exe. Cheers, Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of REMY Julien Sent: 11 July 2006 15:48 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] check-nt Windows 2003 Server after researches on Internet, check_nt and ntclient are compatible only with Windows NT, 2000 and XP but not with Windows 2003. Is there a solution? Thanks -Message d'origine- De : REMY Julien Envoyé : mardi 11 juillet 2006 16:17 À : nagios-users@lists.sourceforge.net Objet : [Nagios-users] check-nt Windows 2003 Server Hello I want to view the free space in my servers in Windows 2000 and 2003. I configure the services.cfg file. That functions with the Windows 2000 servers but that isn't functions with the Windows 2003 Server. The error message is : « connexion refusée » (refused connection). In my checkcommands.cfg file : # 'check_nt' command definition define command { command_name check-nt-disk command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 1248 -v USEDDISKSPACE -l $ARG1$ -w $ARG2$ -c $ARG3$ } Why ? Thank you very much -- --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] check-nt Windows 2003 Server
I'm sorry, but I really do expect users to do a little research for themselves. Check out NSClient++ too (nscplus.sf.net) Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: REMY Julien [mailto:[EMAIL PROTECTED] Sent: 11 July 2006 16:08 To: Randal, Phil; nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] check-nt Windows 2003 Server What does this software ? -Message d'origine- De : Randal, Phil [mailto:[EMAIL PROTECTED] Envoyé : mardi 11 juillet 2006 16:50 À : REMY Julien; nagios-users@lists.sourceforge.net Objet : RE: [Nagios-users] check-nt Windows 2003 Server Nobody told my Windows 2003 servers that! pnsClient.exe works fine on Win 2003. If you're on SP1, disable DEP for pnsclient.exe. Cheers, Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of REMY Julien Sent: 11 July 2006 15:48 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] check-nt Windows 2003 Server after researches on Internet, check_nt and ntclient are compatible only with Windows NT, 2000 and XP but not with Windows 2003. Is there a solution? Thanks -Message d'origine- De : REMY Julien Envoyé : mardi 11 juillet 2006 16:17 À : nagios-users@lists.sourceforge.net Objet : [Nagios-users] check-nt Windows 2003 Server Hello I want to view the free space in my servers in Windows 2000 and 2003. I configure the services.cfg file. That functions with the Windows 2000 servers but that isn't functions with the Windows 2003 Server. The error message is : « connexion refusée » (refused connection). In my checkcommands.cfg file : # 'check_nt' command definition define command { command_name check-nt-disk command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 1248 -v USEDDISKSPACE -l $ARG1$ -w $ARG2$ -c $ARG3$ } Why ? Thank you very much -- --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
Re: [Nagios-users] Check MS Terminal Services
pnsclient does work on Win2003 SP1 boxes, you just need to disable DEP for pnsclient.exe. NSClient++ (http://nscplus.medin.name/index.php/Main_Page) looks good and works for me for what I want to do (and saves me from having to have nrpe_nt installed as well). Clientless? Spend aeons figuring out how to use SNMP queries to get the info, bash your head against countless brick walls, give up, and install a client. Cheers, Phil -- Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Williard, Jason Sent: 28 June 2006 15:46 To: Hans Engelen; nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Check MS Terminal Services Does anyone have any suggestions that do not involve installing additional software on the Windows servers? Jason Williard I would suggest nc_net instead. NSClient does not work with Windows 2003 SP1, nc_net does. Only downside (i guess) is that it needs the .NET redistributable on there. Which is standard on 2003 unless I am much mistaken (don't install many windows boxes myself nomore). Cheers, Hans On 6/28/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Use NSclient to check windows services. install nsclient on windows server and check TS service by nagios plugin. Thanks regards ** Vinay Sharma Information Systems and Solutions Advanex Inc (www.advanex.co.jp) Fon : 813-3822-5863 Fax : 813-5815-7881 Email : [EMAIL PROTECTED] Williard, Jason [EMAIL PROTECTED] 宛先: nagios-users@lists.sourceforge.net 送信者:cc: [EMAIL PROTECTED] 件名: [Nagios-users] Check MS Terminal Services ceforge.net 2006/06/28 09:42 I have several Windows 2003 Servers that I would like to check the status of the terminal services on. What is the best method of doing this? Is there a special plugin available for this purpose? Jason Williard E-MAIL CONFIDENTIALITY NOTICE: The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited. Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null E-MAIL CONFIDENTIALITY NOTICE: The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited. Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server
RE: [Nagios-users] Best web front end
A quick look at the NagioSQL web page gives me little confidence. No documentation or screenshots. I've been playing with both Monarch and Fruity. Both are (to me) Alpha quality, regardless of any RC monnikers the developers attach to them. I needed to patchboth to make them usable: Fruity: http://sourceforge.net/tracker/index.php?func=detailaid=1457860group_id=136248atid=734752 And also this patch to make services imported from Nagios 1.x configs editable: --- --- fruity.inc.orig 2006-05-23 17:04:50.0 +0100+++ fruity.inc 2006-05-23 17:15:16.0 +0100@@ -2806,7 +2806,11 @@ $query = "SELECT service_description FROM nagios_services WHERE service_id = '$service_id'"; $result = $this-dbConnection-Execute($query);- return $this-prepare_for_use($result-fields['service_description']);+ $res2 = $result-fields['service_description'];+ if ($res2 == "") {+ $res2 = "Desc";+ }+ return $this-prepare_for_use($res2); } function return_escalation_description($escalation_id) { Monarch: A fix for the Ajax stuff not working with recent CGI::Ajax versions - http://www.groundworkopensource.com/community/forums/viewtopic.php?t=104sid=ae5e07758b6b93aa975e4778ae9e30fb So far, I am not overly impressed, but Fruity shows promise. Monarch is way too slow. Cheers, Phil --Phil RandalNetwork EngineerHerefordshire CouncilHereford, UK From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deborah MartinSent: 24 May 2006 16:13To: '[EMAIL PROTECTED]'; Oliver MarshallCc: nagios-users@lists.sourceforge.netSubject: RE: [Nagios-users] Best web front end Doesn't NagiosQL2005 dictate where you can install it and where nagios should be installed ? I use /usr/local/nagios ... for my location but NagiosQL2005 seems to want to force a certain directory structure which just would not work for me. It seems a little inflexible as there must be many nagios installs whereby changing the structure would just create far too much work just to get this working. Does anyone disagree here ? regards, deborah -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]Sent: 24 May 2006 12:17To: Oliver MarshallCc: nagios-users@lists.sourceforge.netSubject: RE: [Nagios-users] Best web front endHi Like Deborah says "This has been discussed to death. I'd suggest use google and look aroundto" I tried the Fruity, Nag2Web,NagiosQL and som other configtools But for "me" the best is NagiosQL - www.nagiosql.org It´s a php tool with mysql . very handy I serve about 2500 services and around 150 hosts with this tool and i never had problems. I use NagiosQL 2005 http://www.nagiosQL.org and it works for our daily job. It is easy to install and to configure. If you want to give it a try i can assist you with the configuration. Features are Import/export Easy navigation Backup function Give it a try Regards /Jörg "Oliver Marshall" [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 2006-05-24 11:27 To "Deborah Martin" [EMAIL PROTECTED], [EMAIL PROTECTED], nagios-users@lists.sourceforge.net cc Subject RE: [Nagios-users] Best web front end I cant barely get this linux machine turned on :) Writing my own isn'tan option :)-Original Message-From: [EMAIL PROTECTED][mailto:[EMAIL PROTECTED] On Behalf Of DeborahMartinSent: 24 May 2006 10:26To: '[EMAIL PROTECTED]'; nagios-users@lists.sourceforge.netSubject: RE: [Nagios-users] Best web front endThis has been discussed to death. I'd suggest use google and look aroundtosee what is out there - try them out becauseeveryone has difference preferences to what will work for them. Alternatively, write your own and then you only have yourself to please!:) regs,deborah -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]Sent: 24 May 2006 09:57To: nagios-users@lists.sourceforge.netSubject: Re: [Nagios-users] Best web front endOn Wed, May 24, 2006 at 09:20:39AM +0100, Oliver Marshall wrote: What are peoples opinions on a decent web basedmanagement/configuration front end for Nagios, ideally PHP?looking forward to it - my boss sure would like it. :-)-- ---All the advantages of Linux Managed Hosting--Without the Cost and Risk!Fully trained
RE: [Nagios-users] NSCPlus (aka clearly im stupid)
There is a check_nt as part of the standard nagios plugins (http://nagiosplug.sourceforge.net/). The only difference between that and the check_nt which came with pnsclient.exe is the fileage checking (which isn't implemented yet in nsclient++ - or if it is it doesn't work). You can use NSClient++'s CheckFile via NRPE instead. Also the old nsclient used port 1248, nsclient++ defaults to 12489 (configurable in nsc.ini). Cheers, Phil Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oliver Marshall Sent: 23 May 2006 10:45 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] NSCPlus (aka clearly im stupid) Ok, having given up on using NSClient coz it don't work for me, I have turned to NSCPlus (NSClient++). Thing is, and it's clearly me being stupid, I cant find the server side commands anywhere. I mean, I know the command syntax etc, but in NSClient there was a check_nt file that you put in the libexec folder but with NSClient++, though the command.cfg entries point to additional linux commands (I want to say executables), I cant find those files anywhere. Are these meant to be part of the NSCPlus download? If so, I cant see them. :S Olly --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
RE: [Nagios-users] NSCPlus (aka clearly im stupid)
Or both, the choice isn't exclusive. Cheers, Phil Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Allan Holdt Hansen INBODAN Sent: 23 May 2006 11:01 To: nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] NSCPlus (aka clearly im stupid) Depends on how you choose to run it. NSCPlus can either be used as an Nsclient replacement where you use check_nt or as a replacement for nrpe (nrpe_nt). In this case you use check_nrpe. Check the docs at http://nscplus.medin.name Regards Allan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oliver Marshall Sent: 23. maj 2006 11:45 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] NSCPlus (aka clearly im stupid) Ok, having given up on using NSClient coz it don't work for me, I have turned to NSCPlus (NSClient++). Thing is, and it's clearly me being stupid, I cant find the server side commands anywhere. I mean, I know the command syntax etc, but in NSClient there was a check_nt file that you put in the libexec folder but with NSClient++, though the command.cfg entries point to additional linux commands (I want to say executables), I cant find those files anywhere. Are these meant to be part of the NSCPlus download? If so, I cant see them. :S Olly --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=kkid0709bid3057dat1642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
RE: [Nagios-users] NSCPlus (aka clearly im stupid)
Your use of the word server is way too confusing for my little brain. I'm monitoring windows servers from a linux server... Nuff said on that... So, on the Nagios box, you'll need both the nagios plugins (http://nagiosplug.sf.net) and NRPE (http://www.nagios.org/download/) installed. Use of the NSCPlus modules is documented at http://nscplus.medin.name/index.php/CheckCommands Basic familiarity with nagios commands and services should be enough to get you started, but also have a look at the NSCPlus Help forum over at http://sourceforge.net/forum/?group_id=131326. Cheers, Phil Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oliver Marshall Sent: 23 May 2006 11:18 To: Randal, Phil; nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] NSCPlus (aka clearly im stupid) SoIf I'm using NSCPlus, is there anything to copy to the server ? I have just sat down and re-read the documentation for NSCPlus and the one line especially as NRPE plug-in is the one that does the actual execution. Would imply that I need to also install the NRPE plug-in as well (we're talking server-side here). If I have to enter my new commands in to command.cfg, and those commands have to point to a file to execute with various params, then I guess my question is where is that file (what is that file?) ? /me stops drinking so much coffee. -Original Message- From: Randal, Phil [mailto:[EMAIL PROTECTED] Sent: 23 May 2006 11:02 To: Oliver Marshall; nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] NSCPlus (aka clearly im stupid) There is a check_nt as part of the standard nagios plugins (http://nagiosplug.sourceforge.net/). The only difference between that and the check_nt which came with pnsclient.exe is the fileage checking (which isn't implemented yet in nsclient++ - or if it is it doesn't work). You can use NSClient++'s CheckFile via NRPE instead. Also the old nsclient used port 1248, nsclient++ defaults to 12489 (configurable in nsc.ini). Cheers, Phil Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oliver Marshall Sent: 23 May 2006 10:45 To: nagios-users@lists.sourceforge.net Subject: [Nagios-users] NSCPlus (aka clearly im stupid) Ok, having given up on using NSClient coz it don't work for me, I have turned to NSCPlus (NSClient++). Thing is, and it's clearly me being stupid, I cant find the server side commands anywhere. I mean, I know the command syntax etc, but in NSClient there was a check_nt file that you put in the libexec folder but with NSClient++, though the command.cfg entries point to additional linux commands (I want to say executables), I cant find those files anywhere. Are these meant to be part of the NSCPlus download? If so, I cant see them. :S Olly --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https
RE: [Nagios-users] Remove NSClient++
Have a look in c:\nsclient++\docs\index.html To uninstall NSClient++ execute the following command: NSClient++ /uninstall Cheers, Phil Phil Randal Network Engineer Herefordshire Council Hereford, UK -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Borsani Sent: 19 May 2006 11:16 To: 'Nagios Users Mailinglist' Subject: [Nagios-users] Remove NSClient++ Hi all I installed NSClient on a system that had before NSClient 2.0.1. Actually I need to remove both of them, but I do not know how do about nsclient++. I need to clean the situation to install only NSClient 2.0.1 Regards Marco Borsani Unix Monitoring System Administrator Technical Operation Tel.+39 010 4310115 Fax +39 010 4327454 E-mail: [EMAIL PROTECTED] ITnet S.r.l. - Direzione e Coordinamento di WIND Telecomunicazioni S.p.A. Internet Service Provider Sede legale: Via C.G.Viola, 48 - 00148 Roma Dir. Centrale e Amministrativa: Via Pacinotti, 39 16151 Genova (Italy) http://www.it.net mailto:[EMAIL PROTECTED] ___ Altre sedi ITnet: MILANO tel.: +39 02 30114900[EMAIL PROTECTED] ROMAtel.: +39 06 83116707[EMAIL PROTECTED] ___ ITnet is associated to CIX (Commercial IP eXchange) and RIPE ITnet is associated to AIIP (Associazione Italiana Internet Providers) --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057; dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
RE: [Nagios-users] NsClient vs. NRPE_nt
Try NSClient++ from http://nscplus.medin.name/index.php/Main_Page Depending on your needs and environment you might be able to use just this and not need nrpe_nt (from http://www.miwi-dv.com/nrpent/ Cheers, Phil Phil RandalNetwork EngineerHerefordshire CouncilHereford, UK From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roberto RaffoSent: 10 February 2006 11:18To: nagios-users@lists.sourceforge.netSubject: [Nagios-users] NsClient vs. NRPE_nt What is the best way to monitor a windows 2003 server (cpu, disk, memory, users, event log,) with Nagios? NsClient? What is the last version? Where I can find it? or NRPE_nt? What is the last version? Where I can find it? Any idea?