On Fri, 24 Oct 2003, Roman Volf wrote:
> Show Version:
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
>
> flash image:
> System image file is "flash:c3620-i-mz.122-12a.bin"
>
>
> I'm trying to configure a FastEthern
You need the "plus" image
Michel.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Roman Volf
Sent: Friday, October 24, 2003 2:49 AM
To: [EMAIL PROTECTED]
Subject: No "encapsulation" command on IOS 12.2(12a) ??
Show Version:
This is what http://cio.cisco.com/go/fn is for. You need a "plus" version
for VLAN support on the 3620. i.e. IP Plus, Enterprise Plus, etc. Your
IP version below doesn't include the feature you're looking for.
On Fri, 24 Oct 2003, Roman Volf wrote:
>
> Show Version:
>
> Cisco Internetwork
And if all else fails, of course, you should contact cisco
tech support folks, not NANOG folk.
- ferg
Owen writes:
int ethernet 0/0.0
encap 802.1q 532
You can't spec the encap on the parent interface. You must do it on the sub
int.
Owen
--On Friday, October 24, 2003 02:49:15
int ethernet 0/0.0
encap 802.1q 532
You can't spec the encap on the parent interface. You must do it on the sub int.
Owen
--On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <[EMAIL PROTECTED]> wrote:
Show Version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C36
ailto:[EMAIL PROTECTED]
Sent: Friday, October 24, 2003 5:49 AM
To: [EMAIL PROTECTED]
Subject: No "encapsulation" command on IOS 12.2(12a) ??
Show Version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)
flas
Show Version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
flash image:
System image file is "flash:c3620-i-mz.122-12a.bin"
I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
theres no encapsu