Thanks for all the suggestions.
I added the "switchport mode trunk" to the interfaces, and it did start working
properly after a reload of the switch.
Before the reboot, it would not work.
-Randy
- Original Message -
>
> I am tearing my hair out with an issue, and I hope someone can
My limited understanding and experience with port-channels is that the
member port configurations need to match the port channel
configuration, at least with respect to 'switchport mode trunk',
'switchport trunk encapsulation' and 'switchport trunk allowed vlan'.
This is between a 6500 and a WLC440
I am tearing my hair out with an issue, and I hope someone can point something
out to me that I am missing.
I am setting up 2-port LACP sets on a Cisco 2960G-24TS-L, which then need to be
802.1q trunk ports.
I have set it up as follows:
interface Port-channel1
switchport mode trunk
!
interf
3 matches
Mail list logo