Hi everybody,
Is it possible to obtain switched traffic statistics in a port+vlan
aspect via SNMP on Juniper QFX switches?
For example, Extreme switches have a 'vlan monitor' feature:
configure ports all monitor vlan
then its counters are available by OID .1.3.6.1.4.1.1916.1.2.8.2.1.8 and
Hello NANOGers,
I have one customer that claims that 2 out of 17 downloads using the git
command on github's service are slow and poor on our network when compared
to others.
However, when not using the git command , but using a simple web page link
to a large zipped file from github, its always
use GIT_CURL_VERBOSE=1 GIT_TRACE=1 git will print out full
trace. you can also try other environment variables from
https://git-scm.com/book/tr/v2/Git-Internals-Environment-Variables
In my experiences, this is usually caused by MTU discovery issue.
On Thu, Feb 23, 2017 at 7:40 AM, Bob Evans
Hi Folks,
I'm wondering if anyone has successfully configured prefix delegation on
Comcast's service using CentOS 7 as a router/firewall.
I'm trying to help troubleshoot a configuration and I can't find anything
current via Google.
Cheers,
Harry
If they are using 'git pull', or 'git push' for example, they may be
accessing the data via HTTPS or SSH.
Can your user do a 'git remote -v' and see if they are connecting via
HTTPS or SSH to assist you with troubleshooting?
Then see if it's something specific to one or the other and if it's
On a different vendor (Brocade) we used to work around that by putting a
rate-limiter onto a vlan and polling the rate-limit counter, not sure if that’d
work on a QFX as well though.
Jeroen Wunnink
IP Engineering manager
office: +31.208.200.622 ext. 1011
Amsterdam Office
www.gtt.net
Good afternoon all,
If there is a Verizon wireless back-haul transport engineer on the list
that can reach out to me offline, it would be great.
Topic: bad trunks in the New Brunswick NJ Tandem office.
Thanks
Mark
It may be helpful to look at the forums at UBNT. They have details of how to
make it work on their edge router platform which is a Linux box underneath.
Jared Mauch
> On Feb 22, 2017, at 6:59 PM, Harry Hoffman wrote:
>
> Hi Folks,
>
> I'm wondering if anyone has
In a message written on Tue, Feb 21, 2017 at 11:10:35AM -0800, Keenan Tims
wrote:
> I also spent a significant amount of time trying to figure out a way to
> do this, and was using communities for a while before I found a
> solution. It turns out that the expression knob lets you use the
>
What endpoint do you have? Some of Comcast's devices -- notably the
SMCD3G-CCR -- have a broken IPv6 PD implementation.
On 2/22/17 6:55 PM, Jared Mauch wrote:
It may be helpful to look at the forums at UBNT. They have details of how to
make it work on their edge router platform which is a
I've tried to get it to work in the past, and finally just switched to
a different platform for my "firewall". It's just really really broken
in RHEL6/7 derivatives to try to get dhcp-pd to work properly without
a lot of jank and external script hooks that are fragile at best
without writing
12 matches
Mail list logo