LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Christopher Neitzert
Confirm that you know Christopher Neitzert
https://www.linkedin.com/e/isd/1050272306/8EzUGBSW/
--
(c) 2010, LinkedIn Corporation
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Feb 5, 2010 at 12:36 AM, Christopher Neitzert ch...@neitzert.com
wrote:
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Christopher Neitzert
Confirm that you know Christopher Neitzert
I Just Don't Know What To Do With Myself
- Original Message
From: Jeroen Massar jer...@unfix.org
To: Mark Andrews ma...@isc.org
Cc: nanog@nanog.org; Richard E. Brown richard.e.br...@dartware.com
Sent: Fri, February 5, 2010 1:16:53 AM
Subject: Re: Regular Expression for IPv6 addresses
- Original Message
From: Brian Keefer ch...@smtps.net
To: NANOG list nanog@nanog.org
Cc: a.harrow...@gmail.com; andrew.wallace andrew.wall...@rocketmail.com
Sent: Fri, 5 February, 2010 1:55:58
Subject: Re: lawful intercept/IOS at BlackHat DC, bypassing and recommendations
Andrew
Paul Ferguson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Feb 5, 2010 at 12:36 AM, Christopher Neitzert ch...@neitzert.com
wrote:
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Christopher Neitzert
Confirm that you know Christopher
(Anyone) familiar with configuring a Loop Start T1 through a PBX from a
Dialogic card? I've got it to see the T, it talks, it initiates calls,
but they don't connect completely. Incoming calls just ring and ring but
the software shows connection.
Thoughts on troubleshooting?
Thanks in
Hello,
I'm being asked to look into using BFD over our P2P transport links. Is anyone
else doing this? Our transport links are all 10G Ethernet (LAN-PHY). There's no
alarming inside of LAN-PHY like there is in SONET. The transport side should
propagate a fiber break by stopping to send light
On Fri, Feb 5, 2010 at 9:45 AM, Serge Vautour sergevaut...@yahoo.ca wrote:
Hello,
I'm being asked to look into using BFD over our P2P transport links. Is
anyone else doing this? Our transport links are all 10G Ethernet (LAN-PHY).
There's no alarming inside of LAN-PHY like there is in SONET.
I'm being asked to look into using BFD over our P2P transport links. Is
anyone else doing this? Our transport links are all 10G Ethernet (LAN-PHY).
There's no alarming inside of LAN-PHY like there is in SONET. The transport
side should propagate a fiber break by stopping to send light on
Heya,
Has anyone done any research or have any anecdotal numbers related to
how common it is to have a SIP gateway sitting out on the Internet with no ACL
or authentication? Recently we have noticed a couple of instances where we get
abuse complaints from companies who claim that one
We run it on most 10G backbone (LAN-PHY) links.
Hmm. Backbone L2 transport, or fiber/wave type transport? I'd be
surprised to hear of people running it on dark-fiber-ish stuff.
Both. For L2 transport through switches the usefulness is rather
obvious. For WDM type transport because we're not
On 2/5/10 9:33 AM, Drew Weaver wrote:
Heya,
Has anyone done any research or have any anecdotal numbers related to
how common it is to have a SIP gateway sitting out on the Internet with no
ACL or authentication? Recently we have noticed a couple of instances where
we get abuse
If you are using Asterisk (and many derived PBXs), and your installation is old
enough, and your default context will complete a call...then you may find you
are giving free calling out. This was fixed at some point in the Asterisk
default configuration files.
We have noticed a lot of issues
On Fri, 5 Feb 2010, Drew Weaver wrote:
Has anyone done any research or have any anecdotal numbers related
to how common it is to have a SIP gateway sitting out on the Internet
with no ACL or authentication? Recently we have noticed a couple of
instances where we get abuse complaints from
* Serge Vautour
I'm being asked to look into using BFD over our P2P transport links.
Is anyone else doing this? Our transport links are all 10G Ethernet
(LAN-PHY). There's no alarming inside of LAN-PHY like there is in
SONET. The transport side should propagate a fiber break by stopping
On 05/02/2010 17:33, Drew Weaver wrote:
Has anyone done any research or have any anecdotal numbers related to how common
it is to have a SIP gateway sitting out on the Internet with no ACL or authentication?
Recently we have noticed a couple of instances where we get abuse complaints
On Fri, Feb 05, 2010 at 06:50:39PM +0100, Tore Anderson wrote:
* Serge Vautour
I'm being asked to look into using BFD over our P2P transport links.
Is anyone else doing this? Our transport links are all 10G Ethernet
(LAN-PHY). There's no alarming inside of LAN-PHY like there is in
On 05/02/2010 17:33, Drew Weaver wrote:
Has anyone done any research or have any anecdotal numbers related
to how common it is to have a SIP gateway sitting out on the Internet with
no ACL or authentication? Recently we have noticed a couple of instances
where we get abuse complaints
On Fri, Feb 05, 2010 at 12:45:13PM -0500, David Birnbaum wrote:
We have noticed a lot of issues with Asterisk 1.2 and some 1.4 rollouts.
FreePBX had some truck-sized holes in it.
FreePBX 2.6.0 defaults to refusing anonymous SIP calls. If you enable
inbound anonymous calls, it includes only
I should have prefaced that with older installations as well. As far as we
can see, most of the newer packages have fixed the known truck-sized holes in
their default configurations, but given the lack of any formal framework for
testing this stuff, even the big switches have been found to
Eventually I'll have to get around to setting up netflow so I can detect the
scanners before it becomes a problem =)
Just not a great deal of 'cohesiveness' with the current open source netflow
implementations, and then all of the different Cisco gear has different caveats
related to NF, so
This is an automated weekly mailing describing the state of the Internet
Routing Table as seen from APNIC's router in Japan.
Daily listings are sent to bgp-st...@lists.apnic.net
For historical data, please see http://thyme.apnic.net.
If you have any comments please contact Philip Smith
On Fri, Feb 5, 2010 at 2:26 PM, Justin M. Streiner
strei...@cluebyfour.orgwrote:
On Fri, 5 Feb 2010, Martin Hannigan wrote:
Honestly? A spreadsheet will do it.
Our fiber plant is large enough, and enough people make changes that a
spreadsheet is not a scalable option.
How large?
--
Hello fellow Nanogers,
I know this is an emotional issue for some but we're looking at some upgrades
to our cores and being a classic cisco shop we're wondering if anyone has had
any experience with the Cisco ASR models in the service provider space. We're
used to running VXR's and are trying
On Fri, Feb 5, 2010 at 9:45 AM, David Birnbaum dav...@pins.net wrote:
We have noticed a lot of issues with Asterisk 1.2 and some 1.4 rollouts.
FreePBX had some truck-sized holes in it.
Most/all of the big issues that existed in previous version of
Asterisk/FreePBX have been resolved in later
On Fri, 5 Feb 2010, Martin Hannigan wrote:
Our fiber plant is large enough, and enough people make changes that a
spreadsheet is not a scalable option.
How large?
Around 90 buildings, lots of conduits/manholes/pullboxes, lots of owned
fiber or varying vintages, lots of leased fiber.
My mistake,
Dustin
Dustin Jurman
CEO
1211 North Westshore Blvd - Suite 711
Tampa, Fl 33607
813-232-4887
dus...@rseng.net
Building Better Infrastructure
-Original Message-
From: Justin M. Streiner [mailto:strei...@cluebyfour.org]
Sent: Friday, February 05, 2010 4:29 PM
To:
BGP Update Report
Interval: 28-Jan-10 -to- 04-Feb-10 (7 days)
Observation Point: BGP Peering with AS131072
TOP 20 Unstable Origin AS
Rank ASNUpds % Upds/PfxAS-Name
1 - AS18170 74298 6.7%3377.2 -- CHANGWON-AS-KR Changwon
National University
2 - AS5800
This report has been generated at Fri Feb 5 21:11:24 2010 AEST.
The report analyses the BGP Routing Table of AS2.0 router
and generates a report on aggregation potential within the table.
Check http://www.cidr-report.org for a current version of this report.
Recent Table History
Date
FYI, Start a new thread does not mean reply to a message in an
existing thread and then change the subject line. A new thread consists
of actually creating a new message (however your mail client does that).
The reason this is important is that those of us who actually use
threaded mail readers
Is it a common practice on cable network providers to leave access
to the cable modem/router management web UI wide open ?
Here is the scoop. I heard about it but didn't experienced it hands on
or seen myself until recently when I was testing one of the embedded
TCP/IP boards I produce which as
Hello all,
It has been a while since I posted anything to NANOG. A long time ago
(in a galaxy far far away ;) ) I wrote and maintained a software
package called NorthStar (http://www.brownkid.net/NorthStar) to
administrate IP space and various other things. Life got busy and the
I looked at NorthStar about 5 years ago, but due to its lack of support I
chose to use IPPlan instead. I do remember thinking NorthStar would have
been a great solution had you been actively maintaining it, and maybe it
still will -- should you decide to pick it back up.
I would definitely give
On Fri, Feb 5, 2010 at 9:43 PM, Jorge Amodio jmamo...@gmail.com wrote:
Is it a common practice on cable network providers to leave access
to the cable modem/router management web UI wide open ?
it's very common for a CM to operate a web page, usually
http://192.168.100.1/ that offer the local
We use it on all of our links which are generally over our own DWDM/dark fiber
network. All links are 10G LAN PHY. Our DWDM systems propagate link failures
but one of the main reasons we implemented it was our router vendors did not
drop link during reboots during software upgrades. GR
On Thu, 4 Feb 2010 16:47:47 -0600
Jorge Amodio jmamo...@gmail.com wrote:
I'm totally ignorant (most of the time), is anybody actually using SNMPv3 ?
I worked with an IPsec VPN product around 10 years ago that used SNMPv3
for automated provisioning of the tunnels.
Regards
There are knobs on most models to restrict access to the GUI to:
- the LAN interface
- certain mgmt subnets.
Sounds like the MSO doesn't have things set up correctly.
Frank
-Original Message-
From: Jorge Amodio [mailto:jmamo...@gmail.com]
Sent: Friday, February 05, 2010 8:43 PM
To:
On 6/02/2010, at 1:43 PM, Jorge Amodio wrote:
snip
fired nmap, tried several 10/24 networks and just playing by hand
found hundreds of devices and every single one I tried default password
it worked, not only modems, also modem/routers and some with
integrated VoIP where if I wanted I would
On 2/5/10 8:13 PM, Eric Cables wrote:
I looked at NorthStar about 5 years ago, but due to its lack of support I
chose to use IPPlan instead. I do remember thinking NorthStar would have
been a great solution had you been actively maintaining it, and maybe it
still will -- should you decide to
39 matches
Mail list logo