Re: route converge time

Baldur Norddahl writes: > Hi > > I added a default static route 0.0.0.0 to provider A on router A and did > the same to provider B on router B. This is supposed to be a trick that > allows the network to move packets before everything is fully converged. > Traffic

Re: DHCPv6 PD & Routing Questions

y'all might want to look over the work of the ietf homenet working group for some insight into plans for dhcp-pd, and routing interactions, in the home and small business, at least. https://tools.ietf.org/wg/homenet/ some dhcpv6 specific info is spread around using the new hncp protocol.

route converge time

Hi I got a network with two routers and two IP transit providers, each with the full BGP table. Router A is connected to provider A and router B to provider B. We use MPLS with a L3VPN with a VRF called "internet". Everything happens inside that VRF. Now if I interrupt one of the IP transit

Re: Rack Locks

http://www.netbotz.ca/rackbotz.htm Just make sure you put one on both the front and back. Otherwise one could just open the back and unplug the Ethernet cable. -- Joe Hamelin, W7COM, Tulalip, WA, +1 (360) 474-7474 On Fri, Nov 20, 2015 at 6:06 PM, Joe Abley wrote: > On Nov

Re: route converge time

On Sat, Nov 21, 2015 at 8:44 AM, Baldur Norddahl wrote: > I got a network with two routers and two IP transit providers, each with > the full BGP table. Router A is connected to provider A and router B to > provider B. We use MPLS with a L3VPN with a VRF called

Re: DHCPv6 PD & Routing Questions

On 2015-11-21 05:08, Dave Taht wrote: > y'all might want to look over the work of the ietf homenet working > group for some insight into plans for dhcp-pd, and routing > interactions, in the home and small business, at least. > > https://tools.ietf.org/wg/homenet/ > > some dhcpv6 specific info is

Re: Comcast eastern Washington storm update?

Lots of update information on the WA Comcast website. Looks like they've had daily updates. http://wacomcast.com/2015/11/21/washington-storm-update-nov-21-2015/ John On Fri, Nov 20, 2015 at 8:00 AM, Joshua wrote: > We had hundreds of users in WA with Comcast having many

RE: route converge time

Hey, This is a complex problems and there are quite a few parts to consider. Let's assume you want to optimize how fast you choose the right best exit after a failure. The opposite ( how fast the internet chooses the best entry point into your network after a failure ) is usually not that easy

Re: Rack Locks

On November 20, 2015 at 21:06 jab...@hopcount.ca (Joe Abley) wrote: > On Nov 20, 2015, at 20:55, Jimmy Hess wrote: > > > You're not going to be able to look at a log and see Joe opened it at > > 2:45AM > > 12 months ago, and ever since then, the servers are not quite

Re: DHCPv6 PD & Routing Questions

On 21 November 2015 at 02:27, Owen DeLong wrote: > I mean the router that will deliver the PD to the requesting DHCPv6 client. > > If the DHCPv6 server is on-net, then this will be the requesting client. > Otherwise, it will be the last relay router. > > There is no actual

Re: DHCPv6 PD & Routing Questions

On Fri, Nov 20, 2015 at 10:35 PM, Jim Burwell wrote: > 2) What are the most common ways of managing the routing of delegated > prefixes in the ISPs routing domain? Has a standard method/best > practice emerged yet? Routing protocols? IPv6 RAs? > > One obvious answer would be

Re: Binge On! - And So This is Net Neutrality?

On 11/20/15 3:35 PM, Steve Mikulasik wrote: > Requiring streaming companies not to use UDP is pretty absurd. Surely > they must be able to identify streaming traffic without needing TCP. One presumes that they've gotten rather good at looking at HLS or MPEG-DASH and triggering rate adaption where