I have 5 providers and we get the default from all of them and full routing
tables.
I have seen cases where if there is no default route, the traffic didn't know
where to go, even with full routes from all my providers.
-Mike
-Original Message-
From: NANOG
In the past, when we had a Cisco 7200 doing NATing, we had a script someone
wrote that would telnet into the router and do a sh ip nat trans. The file
would be saved out and we could parse through it at a later time, we had the
script run even 10 minutes or so I believe. If that is what you
Three of ours just got jacked. I have tried to contact via email for update /
fix of their end.
-Mike
-Original Message-
From: Felix Aronsson [mailto:fe...@mrfriday.com]
Sent: Wednesday, April 02, 2014 3:22 PM
To: Joseph Jenkins
Cc: nanog@nanog.org
Subject: Re: BGPMON Alert Questions
For knowledge on the list. We found that our Cisco Nexus 7000s had NTP enabled
on our public facing VDCs, even when the command feature ntp was not present.
I had to explicitly enter no feature ntp to prevent the NTP server service
from existing on our public facing 7K interfaces.
Thanks,
Is everyone having Windstream issues? Our BGP sessions are down and MPLS
network connectivity as of 2/8 @ 3:56 am EST.
-Mike
Eric, you should look at 6connect. They have a good product for IPv4 and IPv6
address management.
-Mike
-Original Message-
From: Eric A Louie [mailto:elo...@yahoo.com]
Sent: Wednesday, December 12, 2012 8:23 PM
To: nanog@nanog.org
Subject: IP Address Management IPAM software for small
Maybe you can hope for a wind storm to take down the pole or someone to crash
into it, then they'll surely have to fix it.
-Mike
-Original Message-
From: Eric Wieling [mailto:ewiel...@nyigc.com]
Sent: Monday, August 20, 2012 3:57 PM
To: Justin M. Streiner; nanog@nanog.org
Subject: RE:
+1, agree on 6connect.net.
-Original Message-
From: Rafael Rodriguez [mailto:packetjoc...@gmail.com]
Sent: Friday, December 16, 2011 12:55 PM
To: Shahab Vahabzadeh
Cc: nanog@nanog.org
Subject: Re: IP Management Software
Check out 6connect.
Sent from my iPhone
On Dec 16, 2011, at
We decided to go the TEXT to HEX conversion route and our main website IPv6
Address ends in 337a:2e6e:6574
-Mike
-Original Message-
From: Jeroen van Aart [mailto:jer...@mompl.net]
Sent: Thursday, June 23, 2011 6:11 PM
To: NANOG list
Subject: IPv6 words
I am sure it has come up a number
We use the IPAM tool by 6connect.net, not sure if that is what you are looking
for exactly?
-Mike
-Original Message-
From: chip [mailto:chip.g...@gmail.com]
Sent: Wednesday, May 25, 2011 3:40 PM
To: Kyle Duren
Cc: nanog@nanog.org
Subject: Re: where are all the IPv6 tools?
On Wed, May
I find it amusing that the article says - The deal will combine two
unprofitable companies
So I guess the thinking is that two negatives make a positive?
-Mike
-Original Message-
From: Dorn Hetzel [mailto:d...@hetzel.org]
Sent: Monday, April 11, 2011 10:26 AM
To: Jay Ashworth
Is anyone staying away from certain address ranges in /127s? I have seen where
they say not to use the all zeros or end addresses from 1 - 127. Thoughts on
this?
-Mike
-Original Message-
From: Justin M. Streiner [mailto:strei...@cluebyfour.org]
Sent: Thursday, March 10, 2011 10:36
When you do a show running, do the interfaces show there at all as fc x/x? Do
you have the FCOE feature enabled?
-Mike
-Original Message-
From: Thomas Weible [mailto:thomas.wei...@flexoptix.net]
Sent: Monday, January 17, 2011 11:14 AM
To: nanog@nanog.org
Subject: Cisco Nexus 5000 with
I assume the ASA's don't run natively on VMware or Xen, I assume you have to
use something like GNS3. I think that would be fine for testing, but in real
world production running an ASA on GNS3 under an another OS seems like a bad
idea. I hope Cisco will come out with Virtual Appliances for
Are you asking about TW Telecom or Time Warner Cable? We have clients
in CA with TW Telecom with no issues at this time.
Mike Walter
Sr. Network Engineer
3z.net a PCD Company
-Original Message-
From: Bill Blackford [mailto:bblackf...@gmail.com]
Sent: Tuesday, June 15, 2010 4:19 PM
, but simply cannot connect to port 25. We have checked
all firewalls of each client. Some ranges of IPs work and others don't.
Looking for someone with a clue who can assist.
Mike Walter
We have had very good luck with using port 587 and requiring the users
to authenticate to send email from outside our network.
Inside customers, we have not changed to force port 587 and
authentication for email clients, but the topic has come up in
discussions. This won't of course, stop
Have you been through http://postmaster.aol.com/?
Mike
-Original Message-
From: Aaron Wendel [mailto:aa...@wholesaleinternet.com]
Sent: Monday, June 01, 2009 12:48 PM
To: nanog@nanog.org
Subject: AOL Postmaster
Is anyone from AOL lurking on the list that could contact me of-list?
I'm
We have not seen any decrease. In the last 24 hours we have seen 3.5
million messages blocked.
-Mike
-Original Message-
From: Revolver Onslaught [mailto:[EMAIL PROTECTED]
Sent: Friday, December 05, 2008 2:14 PM
To: nanog
Subject: McColo and SPAM
Hello,
Since McColo closed, we noticed
Yes, we saw the same thing and all seems to be better now. Was on hold
and hung up.
Mike Walter, MCP
Systems Administrator
3z.net a PCD Company
http://www.3z.net
When Success is the Only Solution think 3z.net
-Original Message-
From: Peter Beckman [mailto:[EMAIL PROTECTED]
Sent
Just spoke with TW Telecom on my ticket. They have (2) OC-192s down in
the Ohio area. They have open troubles with their vendor. Seems odd
that both are down according to the rep I spoke with. We have shut down
our TW Telecom BGP session until resolved due to high latency.
Mike Walter, MCP
21 matches
Mail list logo
