间: 2011-09-16 00:36:58
收件人: Meftah Tayeb
抄送: nanog
主题: Re: IPV6 over a PPTP Link
I did this in the past without troubles.
http://www.gossamer-threads.com/lists/nsp/ipv6/27525
Should give you some help.
- Jared
-- snip --
!
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept
Am 15.09.2011 18:24, schrieb Meftah Tayeb:
can i ofer ipv6 addresses through a PPTP connection using cisco ?
if yes, how please ?
These slides were presented on various conferences showing native v6 via
L2TP. While you asked for PPTP, I thought to point to the link anyway, maybe
the slides
I did this in the past without troubles.
http://www.gossamer-threads.com/lists/nsp/ipv6/27525
Should give you some help.
- Jared
-- snip --
!
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
interface Virtual-Template1
ip
Subject: Re: IPV6 over a PPTP Link
I did this in the past without troubles.
http://www.gossamer-threads.com/lists/nsp/ipv6/27525
Should give you some help.
- Jared
-- snip --
!
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
interface
a static ip and route through it
thank you
- Original Message - From: Jared Mauch ja...@puck.nether.net
To: Meftah Tayeb tayeb.mef...@gmail.com
Cc: nanog@nanog.org
Sent: Thursday, September 15, 2011 6:36 PM
Subject: Re: IPV6 over a PPTP Link
I did this in the past without troubles
: Thursday, September 15, 2011 9:27 PM
Subject: Re: IPV6 over a PPTP Link
So, in order to do that, I recommend you do the backend authentication via
RADIUS to handle this provisioning and routing.
Cisco has documentation on the AV pairs that are necessary to send in the
RADIUS response that goes
On Thu, Sep 15, 2011 at 09:18:26PM +0200, Meftah Tayeb wrote:
great suggestion
i didn't want to use it for a high load of users, just for 2 linked routers
but anyway, i did it through a 6in4 tunnel over PPTP
If that's your goal, you should just use GRE or IPIP if the IPs are
static on
7 matches
Mail list logo