I was thinking of adapting that schematic. I'll have to take another look
at it and see if it's taking what is being said above into account.
On Monday, August 12, 2019 at 2:08:28 PM UTC-4, M1 wrote:
>
> Tyler,
>
>
>
> https://www.nixies.us/projects/its1a-clock/
>
>
>
--
You received this me
Tyler,
https://www.nixies.us/projects/its1a-clock/
Michail Wilson
206-920-6312
From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
Behalf Of Tyler Bourne
Sent: Monday, August 12, 2019 10:54 AM
To: neonixie-l
Subject: Re: [neonixie-l] Just won auction for idk
I have a few of these tubes as well. I've been looking for a good
schematic for a ITS1A clock.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubsc
I'm excited to what Ian comes up with modifying your design. Really neat these
tubes are!
Bill
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubs
312
>
> -Original Message-
> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
> Behalf Of Paul Andrews
> Sent: Saturday, August 10, 2019 2:11 PM
> To: neonixie-l@googlegroups.com
> Subject: Re: [neonixie-l] Just won auction for idk what yet?
>
&
[mailto:neonixie-l@googlegroups.com] On
Behalf Of Paul Andrews
Sent: Saturday, August 10, 2019 2:11 PM
To: neonixie-l@googlegroups.com
Subject: Re: [neonixie-l] Just won auction for idk what yet?
That’s a lot of clocks!
Naturally I haven’t had any problems connecting to my clock. Are you connecting
That’s a lot of clocks!
Naturally I haven’t had any problems connecting to my clock. Are you connecting
directly to the access point or to the host name after it is connected to your
router?
> On Aug 10, 2019, at 12:29 PM, Bill Notfaded wrote:
>
> For that it's worth I have to travel to Dedha
rom: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On
Behalf Of Bill Notfaded
Sent: Saturday, August 10, 2019 8:18 AM
To: neonixie-l
Subject: [neonixie-l] Just won auction for idk what yet?
Here's a video that shows the issue better:
https://photos.app.goo.gl/7aKUMUf62ZJf63VY6
Bill
-
For that it's worth I have to travel to Dedham, MA mid September for some work.
I gotta install a NetApp NAS and a stack of new Cisco catalyst 9300 switches.
I'm not looking forward to that traffic around the airport there!
Bill
--
You received this message because you are subscribed to the
You could also try to lower the voltages on the Anode and other supply
voltages to the ITS-tubes to check if the problem goes away, aim for 230V,
90V and 36V if at all possible without modification - looking at Paul's
schematic it seems like they are controlled by zeners so not easily
adjustabl
Also... I've got a bunch of B tubes so I might just replace them all...
I'll try the one first and messing with the frequencies.
Bill
>
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from
Actually that was my next thing to try... Mess with the timings to see if I
can get the flicker to go away.
Bill
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to n
Thanks for the tips Paul!
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https
! From the video it looks like there are multiple problems (the tens of minutes
digit and the hours digit are flickering every time the seconds changes). I
wonder if they are all caused by the one tube? As far as the other digits are
concerned, have you tried messing with the timings in the GUI?
Yes, I wasn’t a serious bidder. Still it seems like you got a good deal. I’ve
never seen red ZM1040s before.
re. one-tube-clock, PM me. I’m a little snowed-under with projects at the
moment, but let’s see if we can work something out.
re. ITS1A clock. I don’t know if an ITS1B would appear the s
Here's a video that shows the issue better:
https://photos.app.goo.gl/7aKUMUf62ZJf63VY6
Bill
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr..
You’re lucky I let you win it ;-)
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visi
https://www.ebay.com/itm/Nixie-ZM-1040-Siemens-Rohrenuhr-/133129818584
Is it a counter, timer, or clock?
Bill
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neo
18 matches
Mail list logo