Dear net-snmp-coders,
I tried the following syntax but neither worked for me.
trap2sink udp6:[fe80::214:22ff:fe7b:fca2]:162
trap2sink udp6:'[fe80::214:22ff:fe7b:fca2]':162
trap2sink with IPv4 address works just fine.
How to specify trap2sink with IPv6?
Thanks for your support.
Emi
On tor, 2007-11-15 at 08:23 +, Colin Wernham wrote:
> I have a problem with re-loading the snmpd.conf config using
> update_config() function as it appears to not do any reloading of
> config.
It does reload the config. If you were to try again with the flag
-Dsnmpd_ports you would see it chan
I have a problem with re-loading the snmpd.conf config using
update_config() function as it appears to not do any reloading of
config.
If I change the agentaddress config to a different port and then call
update_config(), the old port remains open and the new one is not opened
(as viewed by netstat
On 15 Nov 2007 09:55:01 -, madhan raj <[EMAIL PROTECTED]> wrote:
> 1) I have created an SNMPv3 user ...
> 2) The authentication password which I gave is "abcabcabcabc"
Not a good idea...
> 5) I specified only as "abc" in the SNMP-MIB browser. Still I can able
> to access the router from
Hi Dave, I am using
net-snmp-5.3.0.1 in my router running in linux platform. While using SNMPv3,
I am facing the following problem:1) I have created an SNMPv3
user with authNoPriv as its security level and authentication type as MD52) The
authentication password which I gave is \"abcab
