Delay in sending SNMPTRAP

nse1) { snmp_free_pdu(response1); printf("Thousand sent"); } snmp_close(ss1); } SOCK_CLEANUP; Thanks and Regards, santhosh Important notice: This e-mail and any attachment there to

RE: populating ifTable with Virutal IP interfaces (eth0:1)

find is disabling default ifTable support through configure and instrument this table through mib2c code generation. Is there any similar way to simulate different data in ifTable & ipAddrTable? Thanks, Santhosh -Original Message- From: Robert Story [mailto:[email protected]] Sen

RE: SNMPGET error

Yes I did the same and my problem got solved. Thanks for your reply. Regards, santhosh -Original Message- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Shield Sent: Friday, February 06, 2009 2:20 PM To: Kumar, Santhosh IN BLR SISL Cc: net-snmp

SNMPGET error

Dear all, As per the Procedure given in Tutorial section I have generated the .c and .h file for the object "nstAgentModuleObject" existing in the NET-SNMP-TUTORIAL-MIB for WINDOWS. I have copied the NET-SNMP-TUTORIAL-MIB into the directory C:\usr\share\snmp\mibs. After successful build

Re: Configuration need in order to recieve snmp traps

right now   Thanks & Regards, Santhosh Kumar Suddavanda - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, April 25, 2006 9:36 AM Subject: RE: Configuration need in order to recieve snmp traps HI santhosh   While star

Re: Configuration need in order to recieve snmp traps

) Warning : no access control information configured. This reciever will *NOT* accept any incomming notifications. NET-SNMPversion 5.3.0.1 coudn't open udp:162 -- errno 98 (" Address already in use ")     Thanks & Regards, Santhosh Kumar SuddavandaMail :  [EMAIL PROTECTED]   ---

Configuration need in order to recieve snmp traps

  looking for result ASA     Thanks & Regards, Santhosh Kumar SuddavandaMail :  [EMAIL PROTECTED]   [EMAIL PROTECTED]

Re: Getting output as pss->s_snmp_errno != (-11) failed

Thanks for the help I have sorted out the problem If I face any problems i will share it with the group I would be even greatful to sort the problems in the mailing list also thanks, santhosh - Original Message - From: "Wes Hardaker" <[EMAIL PROTECTED]> To: &q

What does the following error's mean

Hi all,   When i execute the following command   snmpget -v1 -c public snmp_device RFC1213-MIB:sysUpTime.0   o/p : Resource Temporarily unavailabe   but when i ping the device it is responding well       Thanks,   Suddavanda

Getting output as pss->s_snmp_errno != (-11) failed

Hello all,   I have sucessfully installed NET-SNMP in order to demonstarte my manager i am working on a device which has snmp support I have connected the device and my linux system with a cross cable (Ethernet)   I am not able to execute any of the snmp commands on linux system for example:

Re: Re: Does .c & .h Files generated by mib2c requirecompilertorunon harware

] On > Behalf Of Dave Shield > Sent: 15. februar 2006 13:31 > To: Santhosh > Cc: net-snmp-coders > Subject: Re: Re: Does .c & .h Files generated by mib2c > requirecompilertorunon harware > > On Wed, 2006-02-15 at 16:21 +0530, Santhosh wrote: > > I dont want to teac

Re: Re: Does .c & .h Files generated by mib2c require compilertorunon harware

I dont want to teach you Embedded   But i was asking for NET-SNMP that is enough i am experience in embedded 4r past 3yrs   so no problem for embedded linux   i have said i am not getting eonugh Docs for NET-SNMP   Thanks Suddavanda       On Wed, 2006-02-15 at 15:47 +0530, Santhosh wrote

Re: Re: Does .c & .h Files generated by mib2c require compiler torunon harware

would be very greatful   and if the module is completed sucessfully i will try to keep it for net-snmp users   Thanks, Suddavanda     On Wed, 2006-02-15 at 15:27 +0530, Santhosh wrote:> What i mean was i am getting C files from MIB2C > but as of such i dont run any OS on my hardware> if

Re: Re: Does .c & .h Files generated by mib2c require compiler to runon harware

a C file which will take all these header files or should not require any third party libraries to execute on the hardware it should be stand alone system   Thanks   Suddavanda     On Wed, 2006-02-15 at 13:30 +0530, Santhosh wrote:> I am using Net-Snmp-5.3.0.1 for MIB2C compilerWell, &qu

Does .c & .h Files generated by mib2c require compiler to run on harware

Hi all, I have a Question I am using Net-Snmp-5.3.0.1 for MIB2C compiler   And my Mib2c Compiler is working fine with my mib modules also the .C & .H files generated along with the net-snmp header files   can i generate .c & .h files which are Position Independent and can carry headers along wi

getting Endianness Error While configuring

I have downloaded net-snmp source started installing as specified # ./configure # make   after giving make command it is f\giving me error as   configure:error:Endianness has been specified, but you are not cross-compiling   Regards,   Suddavanda Santhosh KumarAsst. Engineer (R&D)Real

Need snmp-mib match

  Hello all,   I am new to MIB2C and i need to work on the same I have got Red Hat 9 (2.4.20-8) version of linux on my system in which net-snmp-5.0.6-17 is preinstalled as mentioned in README.mib2c i need to install snmp-mib2c match for the ner-snmp but for net-snmp-5.0.6.17 i am not finding