Hi All,
I have a doubt regarding the EngineID.
As I have Ported the Net-SNMP-5.4.2.1 as a thread.
Now as every time device reboot EngineID is Changing, Hence the engine
Time reset to "zero[0]" and Engine Boot to "1".
Does it correct that EngineID should also Change ?
Or it should c
Thanks Mike.
My system shows these two host/hr_swrun, host/hr_swinst on executing the
command shared by you.
I think this is the issue with the Linux Gentoo system which has emerge not the
RPM.
I am getting the hrSWInstalledTable from other systems like Windows and red hat.
Also, From my gent
Dave:
/usr/local/bin/snmpgetnext ... system
SNMPv2-MIB::sysDescr.0 = STRING: QNX sotm 6.2.1 2003/05/17-02:28:40edt
x86pc
/usr/local/bin/snmpgetnext ... ucdavis
ucdavis: Unknown Object Identifier (Sub-id not found: (top) -> ucdavis)
I use the following line to configure in QNX:
./configure --enab
Hi,
I 'm getting compilation issues, i couldnot proceed from here.
Here are the steps which i ran:
$ ./configure --with-perl-modules --with-openssl="/usr"
$ make
[Getting errors related to openssl package]
->Added -lcrypto to LDLOADLIBS
as...LDLOADLIBS= -lcrypto
in Makefiles present in
perl/AS
2010/1/28 :
> I don't think the UCD-SNMP-MIB is included in this agent,
It's certainly part of a default build.
You'd have to explicitly exclude it.
> When I do
> #/usr/local/bin/snmpget -u test-agent -l authPriv -a MD5 -A test_authkey -x
> DES -X test_privkey 192.168.83.4 UCD-SNMP-MIB::versio
> From: Vivek Singh Bhadauria [mailto:viv_...@yahoo.com]
> Sent: Wednesday, January 27, 2010 10:58 PM
> I want to get the list of installed software but hrSWInstalledTable is
> empty when I run snmpwalk command.
>
> My question is: Who will fill the hrSWInstalledTable?
> Its me or already impleme
Thanks for your reply. I have already made an unsuccessful attempt with that
also. May be, i have to repost regarding perl module.
On Thu, Jan 28, 2010 at 8:50 AM, Bart Van Assche
wrote:
> On Thu, Jan 28, 2010 at 9:50 AM, Group wrote:
>
>>
>> 2. Added -lcrypto to LDLOADLIBS
>> as...LDLOADLIBS=
I don't think the UCD-SNMP-MIB is included in this agent,
When I do
#/usr/local/bin/snmpget -u test-agent -l authPriv -a MD5 -A test_authkey -x DES
-X test_privkey 192.168.83.4 UCD-SNMP-MIB::versionUpdateConfig.0
I got the following error
UCD-SNMP-MIB::versionUpdateConfig.0 = No Such Object avai
All,
I've been having a
problem with snmptrapd crashing after successfully logging and forwarding v3
traps. I have no problems with version 2 or 1. If I turn forwarding off,
snmptrapd does not crash with v3 traps. My initial tests were run on net-snmp
version 5.3.0.1. I found online a me
Hi, Dave,
I removed "rwcommunity public" from the /usr/local/share/snmp/snmpd.conf file
and try to reload the config by setting the versionUpdateConfig to 1
# /usr/local/bin/snmpset -u test-agent -l authPriv -a MD5 -A test_authkey -x
DES -X test_privkey 192.168.83.4 UCD-SNMP-MIB::versionUpdateCo
On 28 January 2010 16:31, Fulko Hew wrote:
> But nsNotifyShutdown is defined as { netSnmpNotifications 2 } which works
> out to be (in my books):
>
> ... netsnmp (8072).netSnmpNotificationPrefix(4).netSnmpNotifications(0)
>
> I never saw that trailing '.0'.
> Am I missing something in my interpret
On Thu, Jan 28, 2010 at 10:54 AM, Dave Shield wrote:
> On 28 January 2010 15:41, Fulko Hew wrote:
> > I expected to find a MIB file that defines all of the enterprise specific
> > traps that net-snmp can source, but I don't.
>
> The Net-SNMP enterprise-specific traps are defined in the
> NET-SNMP
On 28 January 2010 15:41, Fulko Hew wrote:
> I expected to find a MIB file that defines all of the enterprise specific
> traps that net-snmp can source, but I don't.
The Net-SNMP enterprise-specific traps are defined in the
NET-SNMP-AGENT-MIB. In particular, nsNotifyStart, nsNotifyShutdown
and
I recently updated to 5.5 to try and resolve the "statvfs dev/disk:
Value too large for defined data type" on giant filesystems (3T+). I
compiled 5.5 under x86/sol10 and installed but still see the error.
The change log suggests it was fixed:
"- [PATCH 2449210]: add 64-bit disk usage statistics
I'm putting the finishing touches on trap to event translation rules for our
NMS for our systems that use (agentX extended) Net-SNMP daemons.
What I see (correctly) when we test our extensions and their ability to
reconnect
to the master daemon when the daemon is restarted is...
The daemon sends
On Thu, Jan 28, 2010 at 9:50 AM, Group wrote:
>
> 2. Added -lcrypto to LDLOADLIBS
> as...LDLOADLIBS= -lcrypto
> in Makefiles present in
> perl/ASN/Makefile ; OID/Makefile ; SNMP/Makefile ; TrapReceiver/Makefile
> agent/default_store/Makefile ; agent/Makefile ; default_store/Makefile
>
> The abov
Hi All,
I am using NET-SNMP to create snmp agent on Windows XP.
i installed net-snmp-5.5-x86.exe in my system (downloaded from
http://net-snmp.sourceforge.net/download.html).
I configured the agent using the below command
"snmpconf -g basic_setup" as instructed in the FAQ section.
While
Hi All,
I am using NET-SNMP to create snmp agent on Windows XP.
i installed net-snmp-5.5-x86.exe in my system (downloaded from
http://net-snmp.sourceforge.net/download.html).
I configured the agent using the below command
"snmpconf -g basic_setup" as instructed in the FAQ section.
While
Thank U Dave
-sanjay
Dave Shield wrote:
On 28 January 2010 06:45, sanjaykumar wrote:
I am not able to understand the meaning of following parameters.
As there numerous function in net-snmp-5.4.2.1 having following parameter.
Could someone explain the meaning of these
Hi All,
I am using NET-SNMP to create snmp agent on Windows XP.
i installed net-snmp-5.5-x86.exe in my system (downloaded from
http://net-snmp.sourceforge.net/download.html).
I configured the agent using the below command
"snmpconf -g basic_setup" as instructed in the FAQ section.
While
Hi,
I'm coming up with the same problem as below if i include perl-modules. (i
need perl module for mib2c)
I tried in two different ways:
1. ran
$ make clean
$ ./configure --without-perl-modules --disable-embedded-perl
--with-openssl="/usr"
$ make
[Getting same errors as earlier i.e related to op
On 28 January 2010 06:45, sanjaykumar wrote:
> I am not able to understand the meaning of following parameters.
> As there numerous function in net-snmp-5.4.2.1 having following parameter.
> Could someone explain the meaning of these parameters in DETAILS.
> 1. int majorID
> 2. int min
On 27 January 2010 17:23, wrote:
> I have an agent running for all the SNMP versions.
>
> 1. I want to disable/enable SNMP V1, V2 for the whole agent on the fly,
The simplest way to do this is to remove any community-based
access control settings. Either by editing the snmpd.conf file
or
23 matches
Mail list logo