generic handler registration

. The proper instrumentation could be easily done since the (child) OID is in the request (i.e. netsnmp_request_info). Thanks, Eugen Pavica This communication is confidential and is intended solely for the addressee(s). The information contained herein should be considered Confidential Information

Notification for inform timeout

/informs if nobody is listening for. Thanks a lot, Eugen

RE: Bad engine ID value after -e flag

. And it works fine with the snmpv3 informs as well :-) Thank you so much! Eugen -Original Message- From: Dave Shield [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 25, 2006 4:42 AM To: Eugen Cc: 'Thomas Anders'; Net-snmp-users@lists.sourceforge.net Subject: RE: Bad engine ID value after -e

RE: trapsess instead of trap2sink

OK, it works now. It thought 162 is the default port for traps. Thanks a lot, Eugen -Original Message- From: Wes Hardaker [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 21, 2006 12:06 AM To: Eugen Cc: Net-snmp-users@lists.sourceforge.net Subject: Re: trapsess instead of trap2sink

RE: inform

In this case is it safe to issue several traps in a raw in the same thread? How many? I thought that the net-snmp library is not re-entrant... What mechanism shall be used to control the flow of traps? Thanks, Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

trapsess instead of trap2sink

receiver like this: snmptrapd -On -f -Le d and nothing comes out, Is something more I have to add to trapsess parameters? Thanks, Eugen

inform

Hi, Is it send_v2trap blocking when sending informs ? In other words if I call twice send_v2trap can I be sure that the 2nd call will be performed only when the ack of the 1st trap was received? Thanks, Eugen

RE: Bad engine ID value after -e flag

Hi Thomas, Without double quotes there is no error message indeed but the traps are not intercepted by snmptrapd. I've put the double quotes because there are also generated by snmpconf. However if I send v2 traps with the directive trap2sink localhost it works. Thanks, Eugen -Original

RE: enable-debugging

Thanks Thomas! Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Anders Sent: Tuesday, January 24, 2006 4:26 PM To: Net-snmp-users@lists.sourceforge.net Subject: Re: enable-debugging Eugen wrote: Could the agent complied with the option

RE: Bad engine ID value after -e flag

tell the agent to generate the same kind of traps but for some reason it seams that they are rejected by the trap receiver. Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Anders Sent: Tuesday, January 24, 2006 5:09 PM To: Net-snmp-users

RE: IP address of the trap receiver

Thank you to both of you, Suresh and Dave. For know I'll take the approach to re-read the configuration file. I'll then investigate the 2nd possibility. Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: Monday, January 16, 2006 8

RE: snmpconf issue

Thanks a lot Mahesh, It works now. I had to export both SNMPCONFPATH and SNMPSHAREPATH to /blue/usr/local/snmp/share/snmp Regards, Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kurapati M-G19456 Sent: Wednesday, January 11

ipForwarding R/W ?

do not (except those source-routed via the host). ::= { ip 1 } Could someone explain this behavior? Thanks, Eugen

RE: output issue

Try putting the file name just after Lf. Otherwise the result is in the file named IP address I guess J Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of MaTH Sent: Wednesday, November 23, 2005 9:29 AM To: net-snmp-users

RE: mib2c: invalid OID

the ALL value for the MIBS environment variable it loads also the backup files generated by the text editor with the extension .txt~. So, in my opinion it's better to use specific MIB module names instead. Best regards, Eugen -Original Message- From: Dave Shield [mailto:[EMAIL PROTECTED

mib2c: invalid OID

CONTACT-INFO yyy DESCRIPTION My root MIB module. REVISION 20051028Z DESCRIPTION Initial version. ::= { my_objectId 1 } my_objectId OBJECT IDENTIFIER ::= { enterprises 17094 } END What Im missing here? Thanks, Eugen

snmpd in HA environment

become active. To support this kind of functionality the 2 agents should communicate together Has someone encountered the same issue? Thanks, Eugen

RE: mib2c

Hi Dave, I've patched net-snmp.spec at the top with %define _with_perl_modules 1 I've compiles everything, the net-snmp-perlmods-5.2.1.2-1.i386.rpm was generated, then I've installed it and it works now. Thanks so much, Eugen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

RE: mib2c

/usr/share/man/man3/NetSNMP::TrapReceiver.3pm.gz /usr/share/man/man3/NetSNMP::agent.3pm.gz /usr/share/man/man3/NetSNMP::agent::default_store.3pm.gz /usr/share/man/man3/NetSNMP::default_store.3pm.gz /usr/share/man/man3/NetSNMP::netsnmp_request_infoPtr.3pm.gz Thanks, Eugen -Original Message

RE: Perl versus c agent

tell me please what's wrong? Thanks, Eugen Blueslice Networks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Anders Sent: Friday, October 14, 2005 5:58 PM To: xuemei Cc: Net-snmp-users@lists.sourceforge.net Subject: Re: Perl versus c agent xuemei