o.com]
> Sent: 06 October 2014 10:34
> To: Jason Pope; 'Bill Fenner'
> Cc: net-snmp-cod...@lists.sourceforge.net;
> net-snmp-users@lists.sourceforge.net
> Subject: RE: snmptrapd not processing v3 traps
>
> Jason,
>
> Would you mind expanding on this. Would yo
From: Geoff Kingsmill [mailto:gkingsm...@yahoo.com]
Sent: 06 October 2014 10:34
To: Jason Pope; 'Bill Fenner'
Cc: net-snmp-cod...@lists.sourceforge.net; net-snmp-users@lists.sourceforge.net
Subject: RE: snmptrapd not processing v3 traps
Jason,
Would you mind expanding on this. Woul
2014 6:47 PM
To: Jason Pope; Bill Fenner
Cc: net-snmp-cod...@lists.sourceforge.net; net-snmp-users@lists.sourceforge.net
Subject: RE: snmptrapd not processing v3 traps
Ok … I have got it to work.
I forgot to add in the authUser line :-P
Also set it up without the engine ID and it works
...@lists.sourceforge.net; net-snmp-users@lists.sourceforge.net
Subject: RE: snmptrapd not processing v3 traps
Bill,
I had a look at the doc and no matter what I have done it still does not seem
to work.
I have tried multiple combinations of engineID with a 0x and not in front.
Putting the Id in or not
[mailto:fen...@gmail.com]
Sent: 03 October 2014 21:16
To: Jason Pope
Cc: net-snmp-cod...@lists.sourceforge.net; net-snmp-users@lists.sourceforge.net
Subject: Re: snmptrapd not processing v3 traps
On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope
mailto:jp...@bats.com>> wrote:
Hi,
Has anyone succes
On Fri, Oct 3, 2014 at 11:06 AM, Jason Pope wrote:
> Hi,
>
>
>
> Has anyone successfully set up snmptrapd to accept v3 traps from a device ?
>
>
>
> I have tried to set it up, but I see nothing in the log when the device
> sends v3 traps. When configured to send v2 traps you can see them in the
I have tried in the past and have never been able to get them to
work. I have seen them work at my job but the setup was complicated.
It is necessary to have necessary to have the correct hand-shake of
engine ID and engine ID count along with any keys. I would have to dig
up what we did to see abo
