[snmptrapd] traphandle called twice

ndle four times;(( Can somone tell me why? Any hints? Greetings andre Mit freundlichen Grüssen Andre Heine --- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecy

[Fixed][snmptrapd] traphandle called twice

d the traphandle only twice? > > For this run the snmptrapd calls my handle four times;(( > > Can somone tell me why? > > Any hints? > > Greetings > > andre > > Mit freundlichen Grüssen > > Andre Heine > > > > ---

Re: [snmptrapd] traphandle called twice

rent or two times the same? Also, > please run > snmptrapd with "-Dread_config" to double-check that it's not > reading any > additional config file that has a traphandler defined. > > > +Thomas > > --

Re: SNMP Trap Forwarding.

a handler for the snmptrapd. Use Net::SNMP package from search.cpan.org With that package you can do anything, like net-snmp:) man snmptrapd.conf! Ciao Andre Mit freundlichen Grüssen Andre Heine --- SF.Net email is Sponsored

Re: snmptrapd - avoiding ambiguity in log files

d. If that's not > correct then I'd appreciate instructions for doing it (or a pointer > to > such). I don't know where is the problem;( Ciao Andre Mit freundlichen Grüssen Andre Heine --- SF.Net email is Spons

Disk utilization on SLES9 Linux

[EMAIL PROTECTED]) Free/Used Diskspace works... Any hints? Greetings Andre Mit freundlichen Grüssen Andre Heine --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new

Re: Disk utilization on SLES9 Linux

-MIB::dskErrorFlag.2 = INTEGER: 0 UCD-SNMP-MIB::dskErrorFlag.3 = INTEGER: 0 UCD-SNMP-MIB::dskErrorMsg.1 = STRING: /: less than 85% free (= 62%) UCD-SNMP-MIB::dskErrorMsg.2 = STRING: UCD-SNMP-MIB::dskErrorMsg.3 = STRING: Thanks for help!!! Greetings Andre Mit freundlichen Grüssen Andre Heine

Automatically send traps by proc/exec/ without snmpget/walk/polling?

automatically sends an trap when the ErrorFlag is set to 1? The manpage "snmpd.conf" has the directive "exec", but the command only executed after polling the snmpd with snmpwalk/get... Any hints? Greetings from germany André Mit freundlichen

Re: Automatically send traps by proc/exec/ without snmpget/walk/polling?

&& greetings... André Mit freundlichen Grüssen Andre Heine --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log f

Re: Automatically send traps by proc/exec/ without snmpget/walk/polling?

pt/lib/net-snmp \ --with-cflags="-Wall -fno-strict-aliasing" Version 5.2.2 works fine with the flags... Greetings André Mit freundlichen Grüssen Andre Heine --- This SF.net email is sponsored by: Splunk Inc. Do you grep

Re: Automatically send traps by proc/exec/ without snmpget/walk/polling?

s defaultMonitors yes linkUpDownNotifications yes #notificationEvent MEMEVENT system # using "> 1" for testing:) monitor -r 60 -u pl-public -o sysUpTime.0 -o hrSWRunName \ "high process Memory" hrSWRunPerfMem > 1 trap2sink 10.17.1.124 Greeti

Re: Automatically send traps by proc/exec/ without snmpget/walk/polling?

aultMonitors yes linkUpDownNotifications yes #notificationEvent MEMEVENT system #monitor -u pl-combots -o sysUpTime.0 -o hrSWRunName "high process Memory" hrSWRunPerfMem > 10 trap2sink 10.17.1.124 Thanks && greetings André Mit freundlichen Grüssen Andre Heine -

Re: snmptrap - I don't understand how SNMPv3 traps are sent by the snmptrap utility.

.sysName.0 s "STRING" AFAIK snmpd don't receive traps... Ciao andré Mit freundlichen Grüssen Andre Heine --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJ

Re: snmptrap - I don't understand how SNMPv3 traps are sent by the snmptrap utility.

but I use v2c. Ciao andré Mit freundlichen Grüssen Andre Heine --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as ea

Re: Automatically send traps by proc/exec/ without

ent:delta: Bool comparison: (0 != 0) 0 disman:event:delta: Bool comparison: (0 != 0) 0 disman:event:delta: Bool comparison: (1 != 0) 1 On my Laptop, I have SuSE 10 Prof. with net-snmp-5.2.2 installed(rpm based). There was fired traps afte

[SOLVED???] Automatically send traps by proc/exec/ without

disman:event:objects: Objects add (snmpd.conf, _Bprocess table) > disman:event:fire: Adding event objects (internal) > disman:event:conf: Storing mteTriggerTable config: > disman:event:conf: done. > disman:event:conf: Storing mteEventTable config: > disman:event:conf: done. >

Re: snmpd.conf

Hi Milos, Am Donnerstag, 12. Januar 2006 18:15 schrieb Milos Radenkovic: > Hi everybody, > > I found a document about net-snmp agent configuration for Solaris and tried > to follow Bruce Shaw's advice about 'monitor' directives. He suggests that > there should be one monitor directive for each mon

UCD-SNMP-MIB::systemStats && memSwapError wrongs values?

Hello all, I tried to Monitor the swap partition on SLES 64Bit Linux. with snmp 5.1 and the Compaq "hpasmd" & Co... AFAIK, we must patch the net-snmp with some Compaq patches;( snmpwalk -c community -v 2c 10.19.3.200 UCD-SNMP-MIB::memory UCD-SNMP-MIB::memIndex.0 = INTEGER: 0 UCD-SNMP-MIB::memE

Re: UCD-SNMP-MIB::systemStats && memSwapError wrongs values?

Hi Dave, Am Dienstag, 24. Januar 2006 10:40 schrieben Sie: [...] > > Any hints? > > Please try the current releases (5.2.2 and/or 5.3.0.1) > and report back. Ok, I try the 5.2.2 or the 5.3. The problem is, I must patch the source with some HP patches... This take some time and is very ugly...

Re: UCD-SNMP-MIB::systemStats && memSwapError wrongs values?

Hi Dave, Am Dienstag, 24. Januar 2006 14:23 schrieb Dave Shield: > On Tue, 2006-01-24 at 14:12 +0100, Andre Heine wrote: > > Ok, I try the 5.2.2 or the 5.3. > > The problem is, I must patch the source with some HP patches... > > Are these patches that could usefully be appl

Re: UCD-SNMP-MIB::systemStats && memSwapError wrongs values?

Hi Thomas, Am Dienstag, 24. Januar 2006 15:53 schrieb Thomas Anders: > Andre Heine wrote: > > They have some own agent, for managing the server-hardware... > > Could you please expand on what *exact* package you're referring > to? > > In case you're speaking abou