Re: pf or npf?

On 25/02/16 19:40, Jukka Marin wrote: > I'm setting up a new gateway machine (NetBSD 7.0). My old gateway is based > on NetBSD 6.0 and pf. Can I use pf on NetBSD 7.0 or should I move to npf? > Why? My router panics (in pf) from time to time (NetBSD/amd64 6.1.x). Also, I run miniupnpd

Re: nVidia vs NetBSD v7 resolving issue.

On Fri, Feb 26, 2016 at 12:12:55AM +0330, Mohammad BadieZadegan wrote: > Thanks for your Helps, > I downloaded > *http://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/201602241810Z/images/NetBSD-7.99.26-amd64-install.img.gz >

Re: pf or npf?

On Thu, 25 Feb 2016, John Nemeth wrote: You didn't ask, but I'll add that the third option is ipfilter. It sits somewhere in the middle. It hasn't seen a lot of maintenance or enhancement lately, but it is still much newer then pf. Just FYI, the last version was 4.1.33 and was released

Re: Simple IPSEC client with certificate - phase 1 time out

On Thu, Feb 25, 2016 at 3:10 PM, Frank Wille wrote: > Seems I forgot IPSEC_DEBUG, so I missed important information? I tried it > again with a 7.0 kernel and IPSEC_DEBUG on my PowerBook and the cause > turned out to be a bad "authentication_method" in my propsal: > > Feb 25

Re: Simple IPSEC client with certificate - phase 1 time out

On 25.02.16 18:52:52 I wrote: > and the VPN connection > # racoonctl vc 1.2.3.4 > > ...it fails very early: > > [...] > Feb 25 17:24:08 arwen racoon: INFO: begin Identity Protection mode. > Feb 25 17:24:59 arwen racoon: ERROR: phase1 negotiation failed due to > time up.

Re: pf or npf?

you should move to npf. it is the firewall supported by NetBSD and it works. > Am 25.02.2016 um 19:40 schrieb Jukka Marin : > > Dear List, > > I'm setting up a new gateway machine (NetBSD 7.0). My old gateway is based > on NetBSD 6.0 and pf. Can I use pf on NetBSD 7.0

Re: pf or npf?

On Feb 25, 8:40pm, Jukka Marin wrote: } } I'm setting up a new gateway machine (NetBSD 7.0). My old gateway is based } on NetBSD 6.0 and pf. Can I use pf on NetBSD 7.0 or should I move to npf? } Why? You could certainly use pf with NetBSD 7.0. However, I would have to point out that the

pf or npf?

Dear List, I'm setting up a new gateway machine (NetBSD 7.0). My old gateway is based on NetBSD 6.0 and pf. Can I use pf on NetBSD 7.0 or should I move to npf? Why? I have found more examples and manuals for pf, and moving to npf seems like extra work. With pf, I could also copy my config

Re: nVidia vs NetBSD v7 resolving issue.

Yes, I tried with default xorg.conf and startx but it error again. BTW, I try with nouveau but still this error show me again. Maybe, I must download and install the current version of NetBSD to resolve this problem. Thanks so much. On Thu, Feb 25, 2016 at 3:51 PM, wrote: > On

Simple IPSEC client with certificate - phase 1 time out

Hi, I want to set up an IPSEC client to connect to my office's Lancom router. I was provided with the following details: - Main mode IKEv1 - DH group 2 (1024 bit) - PFS group 2 (1024 bit) - phase 1: IKE AES128, MD5 - phase 2: IPSec AES128, MD5 - phase 2 tunnel mode ESP - remote network

Re: nVidia vs NetBSD v7 resolving issue.

On Thu, Feb 25, 2016 at 12:37:00PM +0330, Mohammad BadieZadegan wrote: > I have Dell E6410 Latitude notebook (With nVidia Graphic card) and I > installed NetBSD v7.0 as a main OS on it. > While I run [X -configure] it make a [xorg.conf.new] and then I run [X > -config /root/xorg.conf.new] but it

Re: Last version of of citrix Client core dumps (Was Re: How to run Microsoft Internet Explorer on NetBSD?)

On Thu, Feb 25, 2016 at 02:44:32PM +0100, Stephan wrote: > Why don´t you just use the Receiver for HTML5? With regard to your > crash, do you have a backtrace handy? Have a look at Jose's from earlier in this thread: http://mail-index.netbsd.org/netbsd-users/2016/02/03/msg017788.html P

Re: Last version of of citrix Client core dumps (Was Re: How to run Microsoft Internet Explorer on NetBSD?)

Why don´t you just use the Receiver for HTML5? With regard to your crash, do you have a backtrace handy? 2016-02-25 14:03 GMT+01:00 Patrick Welche : > On Wed, Feb 03, 2016 at 07:31:35PM +0100, Jose Luis Rodriguez Garcia wrote: >> On Tue, Feb 2, 2016 at 4:17 AM, Eric Haszlakiewicz

Re: Linux emulation - chroot always?

On February 24, 2016 6:11:36 PM EST, Swift Griggs wrote: > >When a Linux-binary runs, what does it "see" in terms of the root file >system? So, for example, if I run 'ldconfig', does it see Linux >libraries >in /emul/linux/lib or just "/lib" ? > >Also, how does this play

Re: Last version of of citrix Client core dumps (Was Re: How to run Microsoft Internet Explorer on NetBSD?)

On Wed, Feb 03, 2016 at 07:31:35PM +0100, Jose Luis Rodriguez Garcia wrote: > On Tue, Feb 2, 2016 at 4:17 AM, Eric Haszlakiewicz wrote: > > On 2/1/2016 3:51 PM, Jose Luis Rodriguez Garcia wrote: > > > > Have you tried downloading a newer version of the client from Citrix's

Re: nVidia vs NetBSD v7 resolving issue.

On Thu, Feb 25, 2016 at 12:37:00PM +0330, Mohammad BadieZadegan wrote: > Hi all, > I have Dell E6410 Latitude notebook (With nVidia Graphic card) and I > installed NetBSD v7.0 as a main OS on it. > While I run [X -configure] it make a [xorg.conf.new] and then I run [X > -config

nVidia vs NetBSD v7 resolving issue.

Hi all, I have Dell E6410 Latitude notebook (With nVidia Graphic card) and I installed NetBSD v7.0 as a main OS on it. While I run [X -configure] it make a [xorg.conf.new] and then I run [X -config /root/xorg.conf.new] but it errored me: [(EE) No device Detected]. Finally I changed "nv" in

Re: Change default compat_linux path ?

In Message , Adrien Fernandes wrote: =>Hello,is it possible to change /emul/linux path ? I downloaded =>by myself Arch Linux operating system and I put it in my home =>directory (~/Linux) and I wish to be able to use

Change default compat_linux path ?

Hello,is it possible to change /emul/linux path ? I downloaded by myself Arch Linux operating system and I put it in my home directory (~/Linux) and I wish to be able to use binaries from there. The fact is that if I move Arch Linux root to /emul/linux/, I can use binaries but if I move it