On Thu, Mar 05, 2020 at 09:35:35PM +0100, Petr Topiarz wrote:
> Hi folks,
> I run several routers with 8.1 and pf and I need traffic shaping.
>
> If I understand correctly, there is no pf in NetBSD 9.0. But there is also
> no documentation about traffic shaping in npf.
>
> Any idea what to do?
Hi folks,
I run several routers with 8.1 and pf and I need traffic shaping.
If I understand correctly, there is no pf in NetBSD 9.0. But there is
also no documentation about traffic shaping in npf.
Any idea what to do?
Thank you
Petr
On Thu, 5 Mar 2020 at 08:19, Ottavio Caruso
wrote:
>
> On Thu, 5 Mar 2020 at 07:28, Andreas Gustafsson wrote:
> >
> > Ottavio Caruso wrote:
> > > I can see all the boot messages and I can log in through the serial
> > > console, but I can't select any options at the boot menu.
> >
> > There is a
Hi Masanobu and sorry for the delay. I had issues (again) with the
mailserver.
On mar 02 14:58, SAITOH Masanobu wrote:
> Could you test with ukphy by removing atphy from your kernel?
I did as you suggested, commenting the line
atphy* at mii? phy ? # Attansic/Atheros PHYs
in
Greg Troxel wrote:
The other thing you can do is export the zvol snapshot via iscsi and use
an iscsi initiator on netbsd to mount it.
I tried this particular flavor of filesystem/network pretzel and when a full
backup ran, it worked for a while and then killed my system DEAD. Not even the
On Wed, Mar 4, 2020 at 5:27 AM Kamil Rytarowski wrote:
>
> I’m pleased to inform you about my new project. I have founded Moritz
> Systems. Moritz Systems is an IT start-up with focus to commercialize
> NetBSD derived products.
I wish you luck and good fortune. I hope some of that good fortune
On Thu, 5 Mar 2020 at 07:28, Andreas Gustafsson wrote:
>
> Ottavio Caruso wrote:
> > I can see all the boot messages and I can log in through the serial
> > console, but I can't select any options at the boot menu.
>
> There is a qemu bug report for this:
>
>
