Ben Greear wrote:
Patrick McHardy wrote:
Stefan Rompf wrote:
Anyway, is it good to propagate __LINK_STATE_PRESENT then? The same
situation here, add a VLAN while the main interface is not present,
and you are out. Can you try to revert the quoted part of my patch,
I'll rethink which flags
RFC2012 saied that tcpOutSegs should excluding those containing only
retransmitted octets. But in my test, linux kernel increased the
tcpOutSegs even if only retransmitted octets is send out.
So I think this is a bug of kernel.
Refer to RFC2012, tcpOutSegs is defined as following:
tcpOutSegs
On systems with a large number of cpus, with even a modest rate of
tasks exiting per cpu, the volume of taskstats data sent on thread exit
can overflow a userspace listener's buffers.
One approach to avoiding overflow is to allow listeners to get data for
a limited and specific set of cpus. By
On Thu, 06 Jul 2006 05:28:35 -0400
Shailabh Nagar [EMAIL PROTECTED] wrote:
On systems with a large number of cpus, with even a modest rate of
tasks exiting per cpu, the volume of taskstats data sent on thread exit
can overflow a userspace listener's buffers.
One approach to avoiding
On Thu, 2006-07-06 at 02:56 -0700, Andrew Morton wrote:
On Thu, 06 Jul 2006 05:28:35 -0400
Shailabh Nagar [EMAIL PROTECTED] wrote:
On systems with a large number of cpus, with even a modest rate of
tasks exiting per cpu, the volume of taskstats data sent on thread exit
can overflow a
Hi Dawid,
Dawid Ciężarkiewicz schrieb:
my name is Dawid Ciezarkiewicz. As a part of my daily job I was to write
kernel module for ebtables to let linux bridges change vlan ids in fly using
logic provided by ebtables matches. After hours of tries and kernel learning,
reading and googlin'
On Thursday, 6 July 2006 13:15, Ingo Oeser wrote:
First of all:
You should not implemented --vlan-target.
Always return EBT_CONTINUE. That saves a lot of (duplicated) code
(you can express the same using some more rules) while keeping
the same flexibility level.
On systems with a large number of cpus, with even a modest rate of
tasks exiting per cpu, the volume of taskstats data sent on thread exit
can overflow a userspace listener's buffers.
One approach to avoiding overflow is to allow listeners to get data for
a limited and specific set of cpus. By
On Wed, 2006-05-07 at 20:47 -0700, David Miller wrote:
From: Thomas Graf [EMAIL PROTECTED]
Date: Wed, 05 Jul 2006 00:05:04 +0200
Fixes for some rather serious action API bugs. Please apply.
All applied, I'll push to -stable, thanks Thomas.
Dave, Did you actually read my comments on the
On Thu, 2006-06-07 at 08:03 -0400, jamal wrote:
On Wed, 2006-05-07 at 20:47 -0700, David Miller wrote:
From: Thomas Graf [EMAIL PROTECTED]
Date: Wed, 05 Jul 2006 00:05:04 +0200
Fixes for some rather serious action API bugs. Please apply.
All applied, I'll push to -stable, thanks
* Shailabh Nagar [EMAIL PROTECTED] 2006-07-06 07:37
@@ -37,9 +45,26 @@ static struct nla_policy taskstats_cmd_g
__read_mostly = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32 },
+ [TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = {
* jamal [EMAIL PROTECTED] 2006-07-06 08:27
The proper patch is attached as a replacement for
[PATCH 3/3] [PKT_SCHED]: Fix error handling while dumping action
from Thomas.
If you have already submitted it, then i will send a patch against it.
I don't understand why you're picky about this
On Thu, 2006-06-07 at 14:45 +0200, Thomas Graf wrote:
* jamal [EMAIL PROTECTED] 2006-07-06 08:27
The proper patch is attached as a replacement for
[PATCH 3/3] [PKT_SCHED]: Fix error handling while dumping action
from Thomas.
If you have already submitted it, then i will send a patch
Does it harm?
SKB BUG: Invalid truesize (380) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (316) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (348) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (316) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (380)
On Wed, 2006-05-07 at 22:45 +0200, Krzysztof Oledzki wrote:
On Wed, 5 Jul 2006, Auke Kok wrote:
David Miller wrote:
From: jamal [EMAIL PROTECTED]
Date: Tue, 04 Jul 2006 15:20:39 -0400
BTW, As an addendum this default behavior changed around 2.6.16 it
seems.
Flow control has
On Thu, 2006-07-06 at 14:08 +0200, Thomas Graf wrote:
* Shailabh Nagar [EMAIL PROTECTED] 2006-07-06 07:37
@@ -37,9 +45,26 @@ static struct nla_policy taskstats_cmd_g
__read_mostly = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32
Andi Kleen wrote:
We're focusing on netfilter here. Is breaking netfilter really the
only issue with this stuff?
Another concern is that it will just not be able to keep
up with a high rate of new connections or a high number of them
(because the hardware has too limited state)
Neither
Jeff,
Thanks a lot for feedback.
We are working on incorporating the feedback. And we will upload the entire
single patch soon.
Thanks,
pradeep
On Wednesday 05 July 2006 21:04, Jeff Garzik wrote:
Linsys Contractor Amit S. Kale wrote:
+static int
+netxen_nic_set_settings(struct net_device
Tom Tucker [EMAIL PROTECTED] wrote:
All that said, the proposed patch helps not only iWARP, but other
transports (iSCSI, IB) as well. It is not large, invasive,
Care to explain on how it helps those other technologies?
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu
David Miller wrote:
From: Jeremy Jackson [EMAIL PROTECTED]
Date: Sun, 02 Jul 2006 22:36:03 -0400
I propose that this is an architecture/framework/API issue that the
Linux core networking code should be dealing with.
Proposals are worthless if nobody wants to do the work to actually
implement
On Thu, Jul 06, 2006 at 09:21:39AM +0800, Zhang, Yanmin wrote:
On Thu, 2006-07-06 at 03:44, Linas Vepstas wrote:
On Wed, Jul 05, 2006 at 08:49:27AM -0700, Auke Kok wrote:
Zhang, Yanmin wrote:
On Fri, 2006-06-30 at 00:26, Linas Vepstas wrote:
Adds PCI Error recovery callbacks to the
On Thursday 29 June 2006 16:26, John W. Linville wrote:
I apologize for the long copy list. I have tried to include all
known interested parties.
This is a follow-up to a thread started by Andrew a few weeks ago
about what should be merged for 2.6.18. One of the topics he cited
was the
On Fri, 2006-07-07 at 00:08 +1000, Herbert Xu wrote:
Tom Tucker [EMAIL PROTECTED] wrote:
All that said, the proposed patch helps not only iWARP, but other
transports (iSCSI, IB) as well. It is not large, invasive,
Care to explain on how it helps those other technologies?
The RDMA CMA
Linas Vepstas wrote:
On Thu, Jul 06, 2006 at 09:21:39AM +0800, Zhang, Yanmin wrote:
On Thu, 2006-07-06 at 03:44, Linas Vepstas wrote:
On Wed, Jul 05, 2006 at 08:49:27AM -0700, Auke Kok wrote:
Zhang, Yanmin wrote:
On Fri, 2006-06-30 at 00:26, Linas Vepstas wrote:
Adds PCI Error recovery
Beschorner Daniel wrote:
Does it harm?
SKB BUG: Invalid truesize (380) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (316) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (348) len=1383, sizeof(sk_buff)=156
SKB BUG: Invalid truesize (316) len=1383, sizeof(sk_buff)=156
SKB BUG:
jamal wrote:
On Wed, 2006-05-07 at 22:45 +0200, Krzysztof Oledzki wrote:
On Wed, 5 Jul 2006, Auke Kok wrote:
David Miller wrote:
Flow control has been on by default in the tg3 driver since the
beginning,
Are you sure about this Dave?;- because I do have a tg3 on my laptop.
[EMAIL
On Thu, Jul 06, 2006 at 11:01:35AM -0700, Auke Kok wrote:
Linas Vepstas wrote:
Perhaps the right fix is to figure out what parts of the driver do i/o
during shutdown, and then add a line if(wedged) skip i/o; to those
places?
that would be relatively simple if we can check a flag (?)
On Sat, Jul 01, 2006 at 10:14:23PM +0200, Michael Buesch wrote:
Hi,
This patch is a rewrite of the bcm43xx init routine.
It is supposed to fix several issues:
* up-down-up.. sequence stale-data issue
(This may fix dhclient issues)
* Fix init vs IRQ race.
* Fix init for cards with
Hi Dave,
this is the second part of pending updates of the Bluetooth subsystem
for the upcoming 2.6.18 kernel. A couple of them are only coding style
cleanups which I failed to submit for the previous kernel release. They
slipped somehow. The rest is driver model integration stuff. Please push
On Mon, Jul 03, 2006 at 03:03:55AM -0700, Andrew Morton wrote:
...
Changes since 2.6.17-mm5:
...
git-e1000.patch
...
git trees.
...
This patch contains the following possible cleanups:
- make needlessly global functions static
- #if 0 the following unused global functions:
- e1000_hw.c:
Thomas Graf [EMAIL PROTECTED] wrote:
* Shailabh Nagar [EMAIL PROTECTED] 2006-07-06 07:37
@@ -37,9 +45,26 @@ static struct nla_policy taskstats_cmd_g
__read_mostly = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32 },
+
On Thu, Jul 06, 2006 at 01:50:59PM -0500, Linas Vepstas wrote:
On Thu, Jul 06, 2006 at 11:01:35AM -0700, Auke Kok wrote:
Linas Vepstas wrote:
Perhaps the right fix is to figure out what parts of the driver do i/o
during shutdown, and then add a line if(wedged) skip i/o; to those
Andrew Morton wrote:
Thomas Graf [EMAIL PROTECTED] wrote:
* Shailabh Nagar [EMAIL PROTECTED] 2006-07-06 07:37
@@ -37,9 +45,26 @@ static struct nla_policy taskstats_cmd_g
__read_mostly = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32
* Andrew Morton [EMAIL PROTECTED] 2006-07-06 14:48
In the interests of keeping this work decoupled from netlink enhancements
I'd propose the below. Is it bad to modify the data at nla_data()?
Yes, it points into a skb data buffer which may be shared by sitting
on other queues if the message is
This patch defines the watermark registers and fixes up the use of this
register.
Signed-Off-By: Ayaz Abdulla [EMAIL PROTECTED]
--- orig-2.6/drivers/net/forcedeth.c2006-07-06 15:04:39.0 -0400
+++ new-2.6/drivers/net/forcedeth.c 2006-07-06 15:05:00.0 -0400
@@ -271,8
This patch adds the definition for the deferral registers and fixes up
the use of these registers.
Signed-Off-By: Ayaz Abdulla [EMAIL PROTECTED]
--- orig-2.6/drivers/net/forcedeth.c2006-07-06 15:03:45.0 -0400
+++ new-2.6/drivers/net/forcedeth.c 2006-07-06 15:03:55.0
Shailabh Nagar [EMAIL PROTECTED] wrote:
Andrew Morton wrote:
Thomas Graf [EMAIL PROTECTED] wrote:
* Shailabh Nagar [EMAIL PROTECTED] 2006-07-06 07:37
@@ -37,9 +45,26 @@ static struct nla_policy taskstats_cmd_g
__read_mostly = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
+#if defined(__powerpc__)
+ /* There isn't a generic way to specify writethrough mappings */
+ pgprot_val(vma-vm_page_prot) |= _PAGE_NO_CACHE;
+ pgprot_val(vma-vm_page_prot) |= _PAGE_WRITETHRU;
+ pgprot_val(vma-vm_page_prot) = ~_PAGE_GUARDED;
+#endif
I don't see any case
Thomas Graf [EMAIL PROTECTED] wrote:
* Andrew Morton [EMAIL PROTECTED] 2006-07-06 14:48
In the interests of keeping this work decoupled from netlink enhancements
I'd propose the below. Is it bad to modify the data at nla_data()?
Yes, it points into a skb data buffer which may be shared
On Thu, Jul 06, 2006 at 12:36:24PM -0500, Tom Tucker wrote:
The RDMA CMA uses IP addresses and port numbers to create a uniform
addressing scheme across all transport types. For IB, it is necessary to
resolve IP addresses to IB GIDs. The ARP protocol is used to do this and
a netfilter rule
On Fri, 2006-07-07 at 08:37 +1000, Benjamin Herrenschmidt wrote:
+int ipath_unordered_wc(void)
+{
+ return 1;
+}
How is the above providing any kind of serialisation ?
It's not intended to; it tells the *caller* whether to do it.
b
-
To unsubscribe from this list: send the
On Thu, 2006-07-06 at 16:34 -0700, Bryan O'Sullivan wrote:
On Fri, 2006-07-07 at 08:37 +1000, Benjamin Herrenschmidt wrote:
+int ipath_unordered_wc(void)
+{
+ return 1;
+}
How is the above providing any kind of serialisation ?
It's not intended to; it tells the *caller*
On Wed, Jul 05, 2006 at 04:29:23PM +0200, Marcel Holtmann wrote:
Hi Greg,
The patch needs some other changes to the driver core that are also in
my git tree, and included in the -mm release. Specifically these
patches are needed:
On Fri, 2006-07-07 at 10:03 +1000, Herbert Xu wrote:
On Thu, Jul 06, 2006 at 12:36:24PM -0500, Tom Tucker wrote:
The RDMA CMA uses IP addresses and port numbers to create a uniform
addressing scheme across all transport types. For IB, it is necessary to
resolve IP addresses to IB GIDs.
On Thu, 2006-06-07 at 11:25 -0700, Auke Kok wrote:
jamal wrote:
[EMAIL PROTECTED]:~/Desktop/maemo$ sudo ethtool -a eth0
Pause parameters for eth0:
Autonegotiate: on
RX: off
TX: off
mine says it's on :)
Dell D610:
[EMAIL PROTECTED]:~$ sudo lspci | grep -i
In article [EMAIL PROTECTED] (at Mon, 3 Jul 2006 12:18:51 +0400), Andrey
Savochkin [EMAIL PROTECTED] says:
@@ -3271,22 +3277,22 @@ int unregister_netdevice(struct net_devi
/* And unlink it from device chain. */
for (dp = dev_base; (d = *dp) != NULL; dp = d-next) {
Why not
Jamal wrote:
Dell D610:
[EMAIL PROTECTED]:~$ sudo lspci | grep -i bcm
:02:00.0 Ethernet controller: Broadcom Corporation
NetXtreme BCM5751
Gigabit Ethernet PCI Express (rev 01)
This is Broadcom tg3 hardware. Are we talking about
e1000 or tg3?
Flow control advertisement has always
47 matches
Mail list logo