Le 19/07/2015 03:24, sfel...@gmail.com a écrit :
From: Scott Feldman sfel...@gmail.com
Just before queuing skb for xmit on port, check if skb has been marked by
switchdev port driver as already fordwarded by device. If so, drop skb. A
non-zero skb-offload_fwd_mark field is set by the
Hello,
On Mon, 20 Jul 2015, Florian Westphal wrote:
You mean:
- NUD_FAILED/NUD_NONE: no timer is pending, no current probing,
we can direct traffic that will set NUD_INCOMPLETE and will
send ARP probe
- NUD_INCOMPLETE: GW is currently probed, do not use it for
On Wed, 2015-04-01 at 19:19 +0300, Madalin Bucur wrote:
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
BMan, PAMU and FMan drivers to deliver Ethernet connectivity on
the Freescale DPAA QorIQ platforms.
On Fri, Jul 17, 2015 at 05:38:30PM +0200, Wolfgang Walter wrote:
eth1 stops sending with the patch after some time
disabling gro on eth0 helps
disabling tso or gso on eth0 and/or eth1 or both does not help
eth0 and eth1 are both intel I350.
What does ethtool -k eth1 say?
Can you confirm
--- iproute2-4.1.1-orig/misc/ss.c 2015-07-06 22:57:34.0 +0100
+++ iproute2-4.1.1/misc/ss.c2015-07-19 12:16:25.0 +0100
@@ -428,9 +428,12 @@
while (cnt != USER_ENT_HASH_SIZE) {
p = user_ent_hash[cnt];
while (p) {
-
Mon, Jul 20, 2015 at 09:54:50AM CEST, sowmini.varad...@oracle.com wrote:
__vxlan_find_mac invokes ether_addr_equal on the eth_addr field,
which triggers unaligned access messages, so rearrange vxlan_fdb
to avoid this in the most non-intrusive way.
Signed-off-by: Sowmini Varadhan
Added the USB IDs 0x413c:0x81b1 for the Dell Wireless 5809e Gobi(TM) 4G
LTE Mobile Broadband Card, a Dell-branded Sierra Wireless EM7305 LTE
card in M.2 form factor, used eg. in Dell's Latitude E7540 Notebook
series.
Signed-off-by: Pieter Hollants pie...@hollants.com
---
On Mon, 2015-07-20 at 09:54 +0200, Joakim Tjernlund wrote:
On Wed, 2015-04-01 at 19:19 +0300, Madalin Bucur wrote:
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
BMan, PAMU and FMan drivers to deliver
__vxlan_find_mac invokes ether_addr_equal on the eth_addr field,
which triggers unaligned access messages, so rearrange vxlan_fdb
to avoid this in the most non-intrusive way.
Signed-off-by: Sowmini Varadhan sowmini.varad...@oracle.com
---
v2: Alexander Duyck comments: place eth_addr[] to be 64b
-Original Message-
From: Vitaly Kuznetsov
Sent: Friday, July 17, 2015 23:04
To: Dexuan Cui
Dexuan Cui writes:
From: David Miller
Sent: Thursday, July 16, 2015 12:19
From: Dexuan Cui
Date: Tue, 14 Jul 2015 03:00:48 -0700
+pr_debug(hvsock_sk_destruct: called\n);
Add debugfs entry 'use_backdoor' to enable/disable backdoor access
to read sge context. By default, we read sge context's via firmware. In
case of FW issues, one can enable backdoor access via debugfs to dump
sge context for debugging purpose.
Signed-off-by: Hariprasad Shenai
Am Montag, 20. Juli 2015, 14:14:59 schrieb Herbert Xu:
On Fri, Jul 17, 2015 at 05:38:30PM +0200, Wolfgang Walter wrote:
eth1 stops sending with the patch after some time
disabling gro on eth0 helps
disabling tso or gso on eth0 and/or eth1 or both does not help
eth0 and eth1 are both
From: KY Srinivasan
Sent: Friday, July 17, 2015 23:33
From: Dexuan Cui
Sent: Friday, July 17, 2015 3:01 AM
From: K. Y. Srinivasan
Sent: Friday, July 17, 2015 3:17
Subject: [PATCH net-next 1/1] hv_netvsc: Wait for sub-channels to be
processed
during probe
diff --git
On Mon, Jul 20, 2015 at 11:39:52AM +0200, Wolfgang Walter wrote:
Can you confirm that disabling tso on eth1 does not help?
Disabling TSO on eth1 does not help.
OK, in that case I think the safest option is to just disable
SIT GRO. If folks need this then they should make sure that
it works
On 07/17/15 at 11:41am, Alexei Starovoitov wrote:
On 7/17/15 5:55 AM, Thomas Graf wrote:
@@ -2373,6 +2470,12 @@ static void vxlan_setup(struct net_device *dev)
netif_keep_dst(dev);
dev-priv_flags |= IFF_LIVE_ADDR_CHANGE;
+/* If in flow based mode, keep the dst including
Julian Anastasov j...@ssi.bg wrote:
On Mon, 20 Jul 2015, Florian Westphal wrote:
The VM has two interfaces,
eth0, 192.168.7.10
eth1, 192.168.8.10
ip route del default
ip route add tos 0x0 via 192.168.7.1
ip route add tos 0x10 via 192.168.8.2
7.1 is reachable via eth0 (7.10/24)
Hello.
On 7/20/2015 5:54 PM, Hariprasad Shenai wrote:
Add debugfs entry 'use_backdoor' to enable/disable backdoor access
to read sge context. By default, we read sge context's via firmware. In
case of FW issues, one can enable backdoor access via debugfs to dump
sge context for debugging
On Mon, 2015-07-20 at 18:11 +0800, Xiong Zhou wrote:
Hi
On Wed, Jun 24, 2015 at 9:39 PM, David Miller da...@davemloft.net
wrote:
1) Add TX fast path in mac80211, from Johannes Berg.
[snip far far far FAR too big quote]
was there any content whatsoever in your email?
johannes
--
To
Hi Joakim
-Original Message-
From: Joakim Tjernlund [mailto:joakim.tjernl...@transmode.se]
Sent: Monday, July 20, 2015 10:57 AM
To: linuxppc-...@lists.ozlabs.org; netdev@vger.kernel.org; Bucur Madalin-
Cristian-B32716
Cc: linux-ker...@vger.kernel.org
Subject: Re: [PATCH RFC 02/10]
Hi Joakim,
It seems we just need to align to the API introduced by Thomas Petazzoni
in 3be2a49e.
Madalin
-Original Message-
From: Joakim Tjernlund [mailto:joakim.tjernl...@transmode.se]
Sent: Monday, July 20, 2015 3:16 PM
To: netdev@vger.kernel.org; Liberman Igal-B31950
Cc:
Hello there,
drivers/net/phy/dp83867.c:167:57: warning: logical ‘or’ of collectively
exhaustive tests is always true [-Wlogical-op]
Source code is
if ((phydev-interface= PHY_INTERFACE_MODE_RGMII_ID) ||
(phydev-interface = PHY_INTERFACE_MODE_RGMII_RXID)) {
Maybe
if
On Mon, 2015-07-20 at 12:28 +, Madalin-Cristian Bucur wrote:
Hi Joakim,
It seems we just need to align to the API introduced by Thomas Petazzoni
in 3be2a49e.
Madalin
So it seems, any idea when the next spin will be ready?
Could you also push it onto
On Wed, 2015-04-29 at 12:29 +0300, Igal.Liberman wrote:
From: Igal Liberman igal.liber...@freescale.com
This patch adds the Ethernet MAC driver support.
Signed-off-by: Igal Liberman igal.liber...@freescale.com
---
drivers/net/ethernet/freescale/fman/inc/mac.h | 125 +
On Mon, 2015-07-20 at 12:18 +, Madalin-Cristian Bucur wrote:
Hi Joakim
-Original Message-
From: Joakim Tjernlund [mailto:joakim.tjernl...@transmode.se]
Sent: Monday, July 20, 2015 10:57 AM
To: linuxppc-...@lists.ozlabs.org; netdev@vger.kernel.org; Bucur Madalin-
From: Sergei Shtylyov [sergei.shtyl...@cogentembedded.com]
Sent: Monday, July 20, 2015 5:43 PM
To: Hariprasad S; netdev@vger.kernel.org
Cc: da...@davemloft.net; Casey Leedom; Nirranjan Kirubaharan
Subject: Re: [PATCH net-next] cxgb4: Add debugfs entry to
On 7/18/2015 05:32 PM, Nikolay Aleksandrov wrote:
On 07/18/2015 05:28 PM, Johan Schuijt wrote:
Thx for your looking into this!
Thank you for the report, I will try to reproduce this locally
Could you please post the full crash log ?
Of course, please see attached file.
Also could you
On 07/17/2015 11:34 AM, Marcelo Ricardo Leitner wrote:
This series improves the way SCTP chooses its src address so that the
choosen one will always belong to the interface being used for output.
v1-v2:
- split out the refactoring from the fix itself
- Doing a full reverse routing as in
On 07/17/15 at 11:25pm, Julian Anastasov wrote:
Hello,
On Fri, 17 Jul 2015, Thomas Graf wrote:
Add a new flowi_tunnel structure which is a subset of ip_tunnel_key to
allow routes to match on tunnel metadata. For now, the tunnel id is
added to flowi_tunnel which allows for
Frank Schreuder fschreu...@transip.nl wrote:
On 7/18/2015 05:32 PM, Nikolay Aleksandrov wrote:
On 07/18/2015 05:28 PM, Johan Schuijt wrote:
Thx for your looking into this!
Thank you for the report, I will try to reproduce this locally
Could you please post the full crash log ?
Of
In the case where there is no mdio bus specified in the devicetree a plain
mdiobus_register() will be called, which tries to probe the connected PHY
by doing mdio_read() on the bus.
Since 6c3e921b18ed (net: fec: Ensure clocks are enabled while using mdio bus)
this needs runtime PM to be available,
Per RFC 6724, section 4, Candidate Source Addresses:
It is RECOMMENDED that the candidate source addresses be the set
of unicast addresses assigned to the interface that will be used
to send to the destination (the outgoing interface).
Add a sysctl to enable this behaviour.
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote:
In the case where there is no mdio bus specified in the devicetree a plain
mdiobus_register() will be called, which tries to probe the connected PHY
by doing mdio_read() on the bus.
Since 6c3e921b18ed (net: fec: Ensure clocks are
Am Montag, den 20.07.2015, 15:59 +0200 schrieb Andrew Lunn:
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote:
In the case where there is no mdio bus specified in the devicetree a plain
mdiobus_register() will be called, which tries to probe the connected PHY
by doing mdio_read()
-Original Message-
From: Joakim Tjernlund [mailto:joakim.tjernl...@transmode.se]
Sent: Monday, July 20, 2015 3:57 PM
To: netdev@vger.kernel.org; Liberman Igal-B31950; Bucur Madalin-Cristian-
B32716
Cc: linuxppc-...@lists.ozlabs.org; linux-ker...@vger.kernel.org
Subject: Re:
This function frees resources and cancels delayed work item that
have been initialized in fec_ptp_init().
Use this to do proper error handling if something goes wrong in
probe function after fec_ptp_init has been called.
Signed-off-by: Lucas Stach l.st...@pengutronix.de
---
So it gets freed when the device is going away.
This fixes a DMA memory leak on driver probe() fail and driver
remove().
Signed-off-by: Lucas Stach l.st...@pengutronix.de
---
drivers/net/ethernet/freescale/fec_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On 07/20/2015 02:47 PM, Frank Schreuder wrote:
On 7/18/2015 05:32 PM, Nikolay Aleksandrov wrote:
On 07/18/2015 05:28 PM, Johan Schuijt wrote:
Thx for your looking into this!
Thank you for the report, I will try to reproduce this locally
Could you please post the full crash log ?
Of
I thought perhaps use_oif_addr_only was a slightly clearer sysctl name.
(Maybe it should be plural, use_oif_addrs_only?)
On 20 July 2015 at 16:04, Erik Kline e...@google.com wrote:
Per RFC 6724, section 4, Candidate Source Addresses:
It is RECOMMENDED that the candidate source addresses
On Mon, Jul 20, 2015 at 09:54:50AM +0200, Sowmini Varadhan wrote:
__vxlan_find_mac invokes ether_addr_equal on the eth_addr field,
which triggers unaligned access messages, so rearrange vxlan_fdb
to avoid this in the most non-intrusive way.
Signed-off-by: Sowmini Varadhan
On Fri, Jul 17, 2015 at 12:34:16PM -0300, Marcelo Ricardo Leitner wrote:
This series improves the way SCTP chooses its src address so that the
choosen one will always belong to the interface being used for output.
v1-v2:
- split out the refactoring from the fix itself
- Doing a full
Hi Nicolas,
have you had a time to look at this?
Thanks,
Michal
On 07/13/2015 06:48 AM, Punnaiah Choudary Kalluri wrote:
This patch is to add support for the design that has multiple ethernet
mac controllers and single mdio bus connected to multiple phy devices.
i.e mdio lines are connected
Florian
On 07/20/2015 12:28 PM, Florian Fainelli wrote:
Adding Dan,
On 20/07/15 05:37, David Binderman wrote:
Hello there,
drivers/net/phy/dp83867.c:167:57: warning: logical ‘or’ of collectively
exhaustive tests is always true [-Wlogical-op]
Source code is
if ((phydev-interface=
On 07/20/2015 12:40 PM, Florian Fainelli wrote:
On 20/07/15 10:37, Dan Murphy wrote:
Florian
On 07/20/2015 12:28 PM, Florian Fainelli wrote:
Adding Dan,
On 20/07/15 05:37, David Binderman wrote:
Hello there,
drivers/net/phy/dp83867.c:167:57: warning: logical ‘or’ of collectively
Hello there,
The proposed fix is logically correct. And it matches the code for
phy_interface_is_rgmii with the ''.
As the original warning message indicates, I used compiler flag
-Wlogical-op to find this problem.
In order to detect this problem in
j...@openmailbox.org j...@openmailbox.org writes:
- free(p-process);
- free(p-process_ctx);
- free(p-socket_ctx);
+ if (p-process)
+ free(p-process);
+ if
This looks good to me, and it looks like this is also relevant for
DSA-driven switches, however I am not exactly clear on how we could
potentially use this on such switches.
For Broadcom tags, there is a reason code forwarded along with the tag
making it to the CPU, and the mirror bit
On 20/07/15 10:37, Dan Murphy wrote:
Florian
On 07/20/2015 12:28 PM, Florian Fainelli wrote:
Adding Dan,
On 20/07/15 05:37, David Binderman wrote:
Hello there,
drivers/net/phy/dp83867.c:167:57: warning: logical ‘or’ of collectively
exhaustive tests is always true [-Wlogical-op]
On Mon, Jul 20, 2015 at 02:15:22PM -0300, Marcelo Ricardo Leitner wrote:
On Fri, Jul 17, 2015 at 02:55:33PM +0200, Thomas Graf wrote:
[ snip ]
@@ -2373,6 +2470,12 @@ static void vxlan_setup(struct net_device *dev)
netif_keep_dst(dev); --- (a)
dev-priv_flags
Hi Scott,
On 18/07/15 18:24, sfel...@gmail.com wrote:
From: Scott Feldman sfel...@gmail.com
v3:
- Per Nicolas Dichtel review: remove errant empty union.
v2:
- Per davem review: in sk_buff, union fwd_mark with secmark to save space
since features appear to be mutually exclusive.
On Fri, Jul 17, 2015 at 5:27 PM, Alex Gartrell alexgartr...@gmail.com wrote:
On Fri, Jul 17, 2015 at 5:10 PM, Cong Wang cw...@twopensource.com wrote:
Hmm, but in htb_delete() we do reset the leaf qdisc before removing the
class from ha
if (!cl-level) {
qlen =
-Original Message-
From: Dexuan Cui
Sent: Monday, July 20, 2015 2:39 AM
To: KY Srinivasan; da...@davemloft.net; netdev@vger.kernel.org; linux-
ker...@vger.kernel.org; de...@linuxdriverproject.org; o...@aepfle.de;
a...@canonical.com; jasow...@redhat.com; vkuzn...@redhat.com
Hi,
I have recently found several data races in usbnet module, checked on
vanilla kernel 4.1.0 on x86_64. The races do actually happen, I have
confirmed it by adding delays and using hardware breakpoints to detect
the conflicting memory accesses (with RaceHound tool,
On Sat, Jul 18, 2015 at 1:50 AM, Eric Dumazet eric.duma...@gmail.com wrote:
HTB + fq_codel ?
Make sure you applied Cong fix
I think only cbq actually uses -drop(), the rest simply call -drop()
for the lower
qdisc's. No?
--
To unsubscribe from this list: send the line unsubscribe netdev in
On Mon, Jul 20, 2015 at 10:12 AM, Baruch Siach bar...@tkos.co.il wrote:
Hi Cong Wang,
On Mon, Jul 20, 2015 at 10:07:00AM -0700, Cong Wang wrote:
On Sun, Jul 19, 2015 at 12:40 AM, Baruch Siach bar...@tkos.co.il wrote:
The veth_setup() routine and the VETH_FEATURES macro are also part of the
On Thu, Jul 16, 2015 at 11:03:14AM -0300, Marcelo Ricardo Leitner wrote:
On Thu, Jul 16, 2015 at 09:50:16AM -0400, Vlad Yasevich wrote:
...
I am not familiar enough with DLM and its history, but my question is this:
If dlm always peels off a socket for a new associations, why is it using
Patches are always appreciated and this looks like a real bug.
But before I can accept it there are a couple of small
changes needed.
1. There is no need to check for NULL when calling free().
Glibc free is documented to accept NULL as a valid request
and do nothing.
2. Please add a
On Fri, Jul 17, 2015 at 02:55:33PM +0200, Thomas Graf wrote:
[ snip ]
@@ -2373,6 +2470,12 @@ static void vxlan_setup(struct net_device *dev)
netif_keep_dst(dev); --- (a)
dev-priv_flags |= IFF_LIVE_ADDR_CHANGE;
+ /* If in flow based mode, keep the dst
Hi,
On 09/07/15 21:42, Julien Grall wrote:
+static void xennet_make_one_txreq(unsigned long mfn, unsigned int offset,
+ unsigned int *len, void *data)
+{
+ struct xennet_gnttab_make_txreq *info = data;
+
+ info-tx-flags |= XEN_NETTXF_more_data;
+
Network header is set with offset ETH_HLEN but it is not true for VLAN
(multiple-)tagged and results in checksum issues in lower devices.
Signed-off-by: Ivan Vecera ivec...@redhat.com
---
drivers/net/macvtap.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/macvtap.c
On Sun, Jul 19, 2015 at 12:40 AM, Baruch Siach bar...@tkos.co.il wrote:
The veth_setup() routine and the VETH_FEATURES macro are also part of the
netlink interface (referenced from struct rtnl_link_ops). Include them under
the netlink code section comment.
Or just remove it? I don't think
Hi Cong Wang,
On Mon, Jul 20, 2015 at 10:07:00AM -0700, Cong Wang wrote:
On Sun, Jul 19, 2015 at 12:40 AM, Baruch Siach bar...@tkos.co.il wrote:
The veth_setup() routine and the VETH_FEATURES macro are also part of the
netlink interface (referenced from struct rtnl_link_ops). Include them
Please find attached one simple patch for the code 4.1.0/4.1.1.
Essentially all that is needed to get rid of this issue is the
addition of:
memset(u, 0, sizeof(*u));
after:
if (!(u = malloc(sizeof(*u
break;
During the analysis of this issue I also found some other
On 07/20/2015 11:44 AM, Ivan Vecera wrote:
Network header is set with offset ETH_HLEN but it is not true for VLAN
(multiple-)tagged and results in checksum issues in lower devices.
Signed-off-by: Ivan Vecera ivec...@redhat.com
---
drivers/net/macvtap.c | 6 ++
1 file changed, 6
Adding Dan,
On 20/07/15 05:37, David Binderman wrote:
Hello there,
drivers/net/phy/dp83867.c:167:57: warning: logical ‘or’ of collectively
exhaustive tests is always true [-Wlogical-op]
Source code is
if ((phydev-interface= PHY_INTERFACE_MODE_RGMII_ID) ||
Hi Dave,
here are few fixes for 4.2, should not have anything out of ordinary.
Please let me know if there are any issues.
Kalle
The following changes since commit 145c37084e3e6584b95f82361922965cc3af41bf:
Doc: z8530book: Fix typo in API-z8530-sync-txdma-open.html (2015-07-10
23:45:31
On Mon, 20 Jul 2015 22:46:23 +0300
Vadim Kochan vadi...@gmail.com wrote:
+ if (s-name)
+ free(s-name);
Please don't add unnecessary conditional.
free(NULL) is defined to do nothing.
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body
Fix:
net/bridge/br_if.c: In function 'br_dev_delete':
net/bridge/br_if.c:284:2: error: implicit declaration of function
'br_multicast_dev_del' [-Werror=implicit-function-declaration]
br_multicast_dev_del(br);
^
cc1: some warnings being treated as errors
when igmp snooping is not
Hello,
On Mon, 20 Jul 2015, Florian Westphal wrote:
Could you please submit your two patches (tos fix and this one)
formally?
In a day or two, I have to extend the patch and
do some tests...
Regards
--
Julian Anastasov j...@ssi.bg
--
To unsubscribe from this list: send the
On Wed, 15 Jul 2015 17:06:36 -0700
Roopa Prabhu ro...@cumulusnetworks.com wrote:
From: Roopa Prabhu ro...@cumulusnetworks.com
This patch replaces exits with returns in
ip route get command handling. This allows batching
of ip route get commands.
$cat route_get_batch.txt
route get
On Mon, Jul 20, 2015 at 05:22:12PM -0400, Chris Metcalf wrote:
On 07/11/2015 10:30 AM, Frederic Weisbecker wrote:
On Fri, Jul 10, 2015 at 03:05:02PM -0400, Chris Metcalf wrote:
The tilegx chips typically don't do cpu offlining anyway, since
we've never really found a usecase, so whatever you
On Wed, 15 Jul 2015 05:50:42 -0700
Nikolay Aleksandrov niko...@cumulusnetworks.com wrote:
After commit 8250bc9ff4e5 (ss: Unify inet sockets output) raw sockets
are displayed as udp because dgram_show_line() is used for both and
thus IPPROTO_UDP is used for both so proto_name() returns udp.
tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master
head: a0a9f33bdf8bf9061c31faab46d8eb46ff644622
commit: e10177abf842d0c40dfecc43bd57a0a762a2fccf [104/107] bridge: multicast:
fix handling of temp and perm entries
config: i386-randconfig-a0-201529 (attached as
On 07/11/2015 10:30 AM, Frederic Weisbecker wrote:
On Fri, Jul 10, 2015 at 03:05:02PM -0400, Chris Metcalf wrote:
The tilegx chips typically don't do cpu offlining anyway, since
we've never really found a usecase, so whatever you boot with
you always have available. We do have support for a
The ship has probably sailed on this one, but it seems like ENOSPC
makes more sense than E2BIG. Any chance of changing it so that poor
ebpf library maintainers in the future don't have to wonder how their
argument list got too big?
net-next/master:kernel/bpf/hashtab.c=static int
On 07/20/2015 05:49 PM, Frederic Weisbecker wrote:
On Mon, Jul 20, 2015 at 05:22:12PM -0400, Chris Metcalf wrote:
On 07/11/2015 10:30 AM, Frederic Weisbecker wrote:
On Fri, Jul 10, 2015 at 03:05:02PM -0400, Chris Metcalf wrote:
The tilegx chips typically don't do cpu offlining anyway, since
//Initialize time wait socket and setup timer
inet_twsk_alloc() tw_refcnt = 0
__inet_twsk_hashdance() tw_refcnt = 3
inet_twsk_schedule() tw_refcnt = 4
inet_twsk_put() tw_refcnt = 3
//Receive packet 1 in timewait state
tcp_timewait_state_process() - inet_twsk_schedule tw_refcnt = 3 (no
First, vehement apologies for sending an RFC patch against such an old
kernel. This is (potentially) a bug fix for a crash that we've been seeing
in 3.2 and 3.10, and, AFAICT, the underlying issue has not been addressed.
We have an application that invokes tc to delete the root every time the
From: Govindarajulu Varadarajan _gov...@gmx.com
Date: Wed, 15 Jul 2015 15:34:40 +0530
* Allow setting of adaptive coalescing setting for all types of interrupt.
* In msi legacy intr, we use single interrupt for rx tx. In this case
tx_coalesce_usecs is invalid. We should use only
From: Govindarajulu Varadarajan _gov...@gmx.com
Date: Wed, 15 Jul 2015 15:34:39 +0530
Adaptive interrupt coalescing is available for msix. This patch adds the
support
for msi poll. Interface for adaptive interrupt coalescing is already added in
driver. We just did not enable it for legacy
From: Phil Sutter p...@nwl.cc
Date: Wed, 15 Jul 2015 21:56:26 +0200
Newly created flows don't have flowi6_oif set (at least if the
associated socket is not interface-bound). This leads to a mismatch in
__xfrm6_selector_match() for policies which specify an interface in the
selector
We have an application that invokes tc to delete the root every time the
config changes. As a result we stress the cleanup code and were seeing the
following panic:
crash bt
PID: 630839 TASK: 8823c990d280 CPU: 14 COMMAND: tc
[... snip ...]
#8 [8820ceec17a0] page_fault at
From: Daniel Borkmann dan...@iogearbox.net
Date: Wed, 15 Jul 2015 14:21:40 +0200
This small helper allows for accessing net_cls cgroups classid. Please
see individual patches for more details.
Series applied, thanks.
--
To unsubscribe from this list: send the line unsubscribe netdev in
the
From: Vivien Didelot vivien.dide...@savoirfairelinux.com
Date: Wed, 15 Jul 2015 10:07:07 -0400
The mv88e6xxx_priv_state structure contains an fid_mask, where 1 means
the FID is free to use, 0 means the FID is in use.
This patch fixes the bit clear in mv88e6xxx_leave_bridge() when
assigning
From: Nikolay Aleksandrov ra...@blackwall.org
Date: Wed, 15 Jul 2015 16:31:09 +0200
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
Get rid of these:
...
Signed-off-by: Nikolay Aleksandrov niko...@cumulusnetworks.com
Applied.
--
To unsubscribe from this list: send the line
On 17/07/15 06:53, Jaedon Shin wrote:
On Jul 17, 2015, at 7:51 AM, Florian Fainelli f.faine...@gmail.com wrote:
Hi David, Petri, Jaedon,
This patch series reworks how we perform PHY initialization and resets in the
GENET driver. Although this contains mostly fixes, some of the changes are a
From: Michael S. Tsirkin m...@redhat.com
Date: Wed, 15 Jul 2015 15:26:19 +0300
ANY_LAYOUT is a compatibility feature. It's implied
for VERSION_1 devices, and non-transitional devices
might not offer it. Change code to behave accordingly.
Signed-off-by: Michael S. Tsirkin m...@redhat.com
From: Vadim Kochan vadi...@gmail.com
It really partially reverts:
ec4d0d8a9def35 (ss: Replace unixstat struct by new sockstat struct)
but adds few fields (name peer_name) from removed unixstat to sockstat struct
to easy
return original code.
Fixes: ec4d0d8a9def35 (ss: Replace unixstat
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
Date: Wed, 15 Jul 2015 22:55:55 +0200
Dave please ignore this patch, I'll send a better fix.
OK
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to majord...@vger.kernel.org
More majordomo info at
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
Date: Wed, 15 Jul 2015 07:16:49 -0700
Hi,
Patch 01 adds a notify when a group is deleted via br_multicast_del_pg()
(on expire, on device delete or on device down).
Patch 02 changes how bridge device and bridge port delete and down/up are
From: Nikolay Aleksandrov ra...@blackwall.org
Date: Wed, 15 Jul 2015 21:52:51 +0200
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
When the bonding is being unloaded and the netdevice notifier is
unregistered it executes NETDEV_UNREGISTER for each device which should
remove the
On 07/20/2015 09:49 PM, David Miller wrote:
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
Date: Wed, 15 Jul 2015 07:16:49 -0700
Hi,
Patch 01 adds a notify when a group is deleted via br_multicast_del_pg()
(on expire, on device delete or on device down).
Patch 02 changes how bridge
From: Simon Horman simon.hor...@netronome.com
Date: Thu, 16 Jul 2015 10:39:14 +0900
Teach rocker to forward packets to CPU when a port is joined to Open vSwitch.
There is scope to later refine what is passed up as per Open vSwitch flows
on a port.
This does not change the behaviour of
From: sfel...@gmail.com
Date: Sat, 18 Jul 2015 18:24:47 -0700
With switchdev support for offloading L2/L3 forwarding data path to a
switch device, we have a general problem where both the device and the
kernel may forward the packet, resulting in duplicate packets on the wire.
Anytime a
On Fri, 10 Jul 2015 08:02:08 -0700
Nikolay Aleksandrov niko...@cumulusnetworks.com wrote:
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index eaaea6208b42..3635b7797508 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -182,6
From: Nikolay Aleksandrov ra...@blackwall.org
Date: Wed, 15 Jul 2015 22:57:01 +0200
From: Nikolay Aleksandrov niko...@cumulusnetworks.com
If the bond is enslaving a device with different type it will be setup
by it, but if after being setup the enslave fails the bond doesn't
switch back its
On Mon, Jul 20, 2015 at 03:48:14PM +0200, Lucas Stach wrote:
In the case where there is no mdio bus specified in the devicetree a plain
mdiobus_register() will be called, which tries to probe the connected PHY
by doing mdio_read() on the bus.
Since 6c3e921b18ed (net: fec: Ensure clocks are
From: Stas Sergeev s...@list.ru
The commit 898b2970e2c9 (mvneta: implement SGMII-based in-band link state
signaling) implemented the link parameters auto-negotiation unconditionally.
Unfortunately it appears that some HW that implements SGMII protocol,
doesn't generate the inband status, so it is
From: Stas Sergeev s...@list.ru
fixed_phy_register() currently hardcodes the fixed PHY link to 1, and
expects to find a speed parameter to provide correct information
towards the fixed PHY consumer.
In a subsequent change, where we allow managed (e.g: (RS)GMII in-band
status auto-negotiation)
From: Stas Sergeev s...@list.ru
Currently the PHY management type is selected by the MAC driver arbitrary.
The decision is based on the presence of the fixed-link node and on a
will of the driver's authors.
This caused a regression recently, when mvneta driver suddenly started
to use the in-band
The SF2 driver currently overrides speed settings for its port
configured using a fixed PHY, this is both unnecessary and incorrect,
because we keep feedback to the hardware parameters that we read from
the PHY device, which in the case of a fixed PHY cannot possibly change
speed.
This is a
1 - 100 of 124 matches
Mail list logo
