[PATCH] wlcore: allow elp during wowlan suspend

when enabling wowlan and entering suspend the last write to the firmware allowing it to go into elp mode was not completing before suspend, leaving the firmware running in full active mode consuming high power. Use an immediate call instead of a work queue for this last access allowing the

[PATCH] wlcore: spi: fix build warning caused by redundant variable

The ret variable is unused in wlcore_probe_of() Remove it for fixing build warning. Fixes: 01efe65aba65 ("wlcore: spi: add wl18xx support") Signed-off-by: Eyal Reizer --- drivers/net/wireless/ti/wlcore/spi.c | 1 - 1 file changed, 1 deletion(-) diff --git

RE: [PATCHv8] wlcore: spi: add wl18xx support

> > > Add support for using with both wl12xx and wl18xx. > > > > - all wilink family needs special init command for entering wspi mode. > > extra clock cycles should be sent after the spi init command while the > > cs pin is high. > > - Use inverted chip select for sending a dummy 4 bytes

[PATCHv8] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

RE: [PATCH v7] wlcore: spi: add wl18xx support

> > From: Eyal Reizer > > > > Add support for using with both wl12xx and wl18xx. > > > > - all wilink family needs special init command for entering wspi mode. > > extra clock cycles should be sent after the spi init command while the > > cs pin is high. > > - Use

[PATCH v6] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

[PATCH v4] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

RE: [PATCHv3] wlcore: spi: add wl18xx support

> > > > - all wilink family needs special init command for entering wspi mode. > > extra clock cycles should be sent after the spi init command while the > > cs pin is high. > > - Use inverted chip select for sending a dummy 4 bytes command that > > completes the init stage and puts the

[PATCHv3] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

RE: [PATCHv2] wlcore: spi: add wl18xx support

> > > Thanks! Glad the illustration helped. > > I will try it out again as if i recall cotrectly, i did try that l, and it > > didnt produce > the correct waveform, but perhaps i didnt understand the usage of > .cs_change correctly. > > Will double check anyway. > > It could also be a bug in

RE: [PATCHv2] wlcore: spi: add wl18xx support

> > > > It is also part of the generic spi.h (include/Linux/spi/spi.h), > > > > already part of " struct spi_device" So it seemed redundant adding > > > > another mechanism for implementing the same. > > > > Platform that interact with a wilink need to use it, and platforms > > > > that don't have

RE: [PATCHv2] wlcore: spi: add wl18xx support

Arnd, > > > > > > > > - all wilink family needs special init command for entering wspi mode. > > > > extra clock cycles should be sent after the spi init command while the > > > > cs pin is high. > > > > - switch to controling the cs pin from the spi driver for achieveing the > > > > above.

RE: [PATCHv2] wlcore: spi: add wl18xx support

> > > > - all wilink family needs special init command for entering wspi mode. > > extra clock cycles should be sent after the spi init command while the > > cs pin is high. > > - switch to controling the cs pin from the spi driver for achieveing the > > above. > > - the selected cs gpio is

[PATCHv2] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - switch to controling the cs pin from the spi driver for achieveing the above. -

RE: [PATCH] wlcore: spi: add wl18xx support

> -Original Message- > From: Kalle Valo [mailto:kv...@codeaurora.org] > Sent: Thursday, April 07, 2016 3:25 PM > To: Eyal Reizer > Cc: linux-wirel...@vger.kernel.org; netdev@vger.kernel.org; linux- > ker...@vger.kernel.org; Reizer, Eyal; devicet...@vger.kernel.org >

RE: [PATCH] wlcore: spi: add wl18xx support

Ping on this patch > -Original Message- > From: Eyal Reizer [mailto:eyalrei...@gmail.com] > Sent: Wednesday, March 30, 2016 4:07 PM > To: kv...@codeaurora.org; linux-wirel...@vger.kernel.org; > netdev@vger.kernel.org; linux-ker...@vger.kernel.org > Cc: Reizer, Eyal