Add a dst_cache to ila_lwt structure. This holds a cached route for the
translated address. In ila_output we now perform a route lookup after
translation and if possible (destination in original route is full 128
bits) we set the dst_cache. Subsequent calls to ila_output can then use
the cache to avoid the route lookup.
This eliminates the need to set the gateway on ILA routes as previously
was being done. Now we can do something like:
./ip route add 3333::2000:0:0:2/128 encap ila 2222:0:0:2 \
csum-mode neutral-map dev eth0 ## No via needed!
Also, add destroy_state to lwt ops. We need this do destroy the
dst_cache.
Tested:
Running 200 TCP_RR streams:
Baseline, no ILA
1730716 tps
102/170/313 50/90/99% latencies
88.11 CPU utilization
Using ILA in both directions
1680428 tps
105/176/325 50/90/99% latencies
88.16 CPU utilization
Tom Herbert (2):
lwtunnel: Add destroy state operation
ila: Cache a route to translated address
include/net/lwtunnel.h | 7 ++---
net/core/lwtunnel.c | 13 +++++++++
net/ipv6/ila/ila_lwt.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++---
3 files changed, 88 insertions(+), 8 deletions(-)
--
2.9.3
