Veli-Matti Lintu wrote:
[...]
>> I don't see an issue with the above behavior when ad_select is
>> set to the default value of "stable"; bonding does reselect a new
>> aggregator when all links fail, and it appears to follow the standard.
>
>In my testing
2016-06-22 3:49 GMT+03:00 Jay Vosburgh :
>
> Veli-Matti Lintu wrote:
> [...]
The ports are configured in switch settings (HP Procurve 2530-48G) in
same trunk group (TrkX) and trunk group type is set as LACP.
Veli-Matti Lintu wrote:
[...]
>>>The ports are configured in switch settings (HP Procurve 2530-48G) in
>>>same trunk group (TrkX) and trunk group type is set as LACP.
>>>/proc/net/bonding/bond0 also shows that the three ports belong to same
>>>aggregator and
2016-06-21 18:46 GMT+03:00 Jay Vosburgh :
> Veli-Matti Lintu wrote:
>
>>2016-06-20 17:11 GMT+03:00 zhuyj :
>>> 5. Switch Configuration
>>> ===
>>>
>>> For this section, "switch" refers to
Veli-Matti Lintu wrote:
>2016-06-20 17:11 GMT+03:00 zhuyj :
>> 5. Switch Configuration
>> ===
>>
>> For this section, "switch" refers to whatever system the
>> bonded devices are directly connected to (i.e., where the
2016-06-20 17:11 GMT+03:00 zhuyj :
> 5. Switch Configuration
> ===
>
> For this section, "switch" refers to whatever system the
> bonded devices are directly connected to (i.e., where the other end of
> the cable plugs into). This may be an actual
Hello,
I have been trying to get the bonding driver working with multiple
aggregators with two switches in mode=802.3ad to handle failing links
properly. The goal is to have always the best possible bonded link in
use if one or physical links fail.
The bonding documentation describes that