Denys wrote:
here is try to switch clocksource to acpi_pm
Time: acpi_pm clocksource has been installed.
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
What does /proc/net/psched contain?
-
To unsubscribe from this
What does /proc/net/psched contain?
visp-1 ~ # cat /proc/net/psched
03e8 0400 000f4240 3b9aca00
--
Denys Fedoryshchenko
Technical Manager
Virtual ISP S.A.L.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo
Denys wrote:
What does /proc/net/psched contain?
visp-1 ~ # cat /proc/net/psched
03e8 0400 000f4240 3b9aca00
OK, hrtimers are disabled on your system, but we still announce
the usec clock resolution to userspace, which is used by HTB to
calculate the burst rate. But actually that
Seems i am lost a bit. Now 2.6.22, i am not sure that working well. Possible
it is related, that i booted kernel over kexec.
I will try to do full power cycle reboot if required, but it will cause for
me serious downtime. Please tell me, which kernel prefferable to boot?
If it is interesting
On Wed, 2007-10-10 at 14:45 +0200, Patrick McHardy wrote:
OK, hrtimers are disabled on your system, but we still announce
the usec clock resolution to userspace, which is used by HTB to
calculate the burst rate. But actually that can't be the reason
since that has already been the case in
Denys wrote:
Seems i am lost a bit. Now 2.6.22, i am not sure that working well. Possible
it is related, that i booted kernel over kexec.
Possibly.
I will try to do full power cycle reboot if required, but it will cause for
me serious downtime. Please tell me, which kernel prefferable to
I did complete reboot(without kexec) to 2.6.23 (same configuration) and seems
it is working better (not stuck as before to 60-70Mbit/s).
On all cases current_clocksources was hpet, just i tried to change it (doesnt
help at all).
visp-1 ~ # cat /sys/devices/system/clocksource/clocksource0/
Patch applied. Rebooted over kexec to 2.6.23 without nmi_watchdog, for now
all seems fine.
visp-1 ~ # cat /proc/net/psched
03e8 0400 000f4240 3b9aca00
82942/82949 KBit/S (53083445/53087945) (106109614/106105114)
82955/82955 KBit/S (53091631/53091631) (159193059/159193059)
82955/82955
