Hi Florian,
Am 04.01.2018 um 05:49 schrieb Florian Fainelli:
On 12/29/2017 07:22 PM, Florian Fainelli wrote:
Le 12/29/17 à 13:56, Florian Fainelli a écrit :
Le 12/29/17 à 12:21, Florian Fainelli a écrit :
Hi Jochen,
Le 12/18/17 à 02:44, Jochen Friedrich a écrit :
Hi Florian,
unfortunately,
On 12/29/2017 07:22 PM, Florian Fainelli wrote:
> Le 12/29/17 à 13:56, Florian Fainelli a écrit :
>> Le 12/29/17 à 12:21, Florian Fainelli a écrit :
>>> Hi Jochen,
>>>
>>> Le 12/18/17 à 02:44, Jochen Friedrich a écrit :
Hi Florian,
unfortunately, this doesn't make any difference.
>>>
Le 12/29/17 à 13:56, Florian Fainelli a écrit :
> Le 12/29/17 à 12:21, Florian Fainelli a écrit :
>> Hi Jochen,
>>
>> Le 12/18/17 à 02:44, Jochen Friedrich a écrit :
>>> Hi Florian,
>>>
>>> unfortunately, this doesn't make any difference.
>>>
>>> Just out of curiosity, BPI-R1 has pull-down resistor
Le 12/29/17 à 12:21, Florian Fainelli a écrit :
> Hi Jochen,
>
> Le 12/18/17 à 02:44, Jochen Friedrich a écrit :
>> Hi Florian,
>>
>> unfortunately, this doesn't make any difference.
>>
>> Just out of curiosity, BPI-R1 has pull-down resistors on LED6 and 7
>> (MII_MODE0/1). However, the public ava
Hi Jochen,
Le 12/18/17 à 02:44, Jochen Friedrich a écrit :
> Hi Florian,
>
> unfortunately, this doesn't make any difference.
>
> Just out of curiosity, BPI-R1 has pull-down resistors on LED6 and 7
> (MII_MODE0/1). However, the public available 53125U sheet doesn't
> document these pins:
>
> LE
Hi Florian,
unfortunately, this doesn't make any difference.
Just out of curiosity, BPI-R1 has pull-down resistors on LED6 and 7
(MII_MODE0/1). However, the public available 53125U sheet doesn't
document these pins:
LED[6] IMP_MODE[0] Pull-up Active low (since IMP Mode is not used)
LED[7] IM
Hi Jochen,
On 11/23/2017 11:14 AM, Jochen Friedrich wrote:
> Hi Florian,
>
>> With Broadcom tags (or any type of switch tagging protocol), eth0
>> becomes a conduit interface and no longer a "normal" network device for
>> applications/socket to use. This means that if you were obtaining an IP
>>
Hi Florian,
With Broadcom tags (or any type of switch tagging protocol), eth0
becomes a conduit interface and no longer a "normal" network device for
applications/socket to use. This means that if you were obtaining an IP
address through a DHCP client using e.g: dhclient eth0, this now needs
to
Hi Jochen,
On 11/23/2017 09:05 AM, Jochen Friedrich wrote:
> Hi Florian,
>
>
>> OK, because this is a 53125S, it should support Broadcom tags correctly,
>> not clear yet what is happening. Just to make sure, you are using
>> arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts as the DTS for this platform,
Hi Florian,
OK, because this is a 53125S, it should support Broadcom tags correctly,
not clear yet what is happening. Just to make sure, you are using
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts as the DTS for this platform,
right?
Yes, that's the DTS I'm using.
If so, can you provide the eth
On 11/21/2017 03:07 PM, Jochen Friedrich wrote:
> Hallo Florian,
>
>> - what is the value of page 02, register 3 during b53_switch_detect()? A
>> managed switch should have this set to 0x3, whereas I would expect an
>> unmanaged switch to be 0x0
>
> The register has the value 3.
OK, because this
Hallo Florian,
- what is the value of page 02, register 3 during b53_switch_detect()? A
managed switch should have this set to 0x3, whereas I would expect an
unmanaged switch to be 0x0
The register has the value 3.
Thanks, Jochen
Hi Florian,
Hi Jochen,
On 11/21/2017 12:10 AM, Jochen Friedrich wrote:
Hi Florian,
i just tested the latest DSA patches for b53 on a bpi-r1 device (net:
dsa: b53: Turn on Broadcom tags).
Unfortunately, the bcm53125 does not seem to handle the broadcom tags on
CPU port although tuned on b53_
Hi Jochen,
On 11/21/2017 12:10 AM, Jochen Friedrich wrote:
> Hi Florian,
>
>
> i just tested the latest DSA patches for b53 on a bpi-r1 device (net:
> dsa: b53: Turn on Broadcom tags).
>
> Unfortunately, the bcm53125 does not seem to handle the broadcom tags on
> CPU port although tuned on b53_
Hi Florian,
i just tested the latest DSA patches for b53 on a bpi-r1 device (net:
dsa: b53: Turn on Broadcom tags).
Unfortunately, the bcm53125 does not seem to handle the broadcom tags on
CPU port although tuned on b53_brcm_hdr_setup(). The tag is still
visible on a device connected to one
15 matches
Mail list logo
