On Monday 18 September 2006 23:22, David Miller wrote:
Ok, ok, but don't we have queueing disciplines that need the timestamp
even on ingress?
I grepped and I can't find any. The only non SIOCGTSTAMP users of the
time stamp seem to be sunrpc and conntrack and I bet both can be converted
over
On Mon, Sep 18, 2006 at 10:52:52PM +0200, Lennert Buytenhek wrote:
Check out the thread [PATCH][RFC] etherip: Ethernet-in-IPv4 tunneling
that was on netdev in January of 2005 -- a number of arguments against
etherip (and for tunneling ethernet in GRE) were raised back then.
I read this thread
Hi David,
please find enclosed for review the proposed changes to integrate UDP-Lite
code with UDP.
Please disregard all earlier patches, I have been putting in more hard work to
consolidate the code further, also with regard to expanding to UDP(-Lite) v6.
(Reductions are drastic: udplite.c is
Miscellaneous files which complete the support for UDP-Litev4.
--
Documentation/networking/udplite.txt | 291 +++
include/linux/in.h |1
include/linux/socket.h |1
include/net/snmp.h |2
Basic xfrm and netfilter support for UDP-Lite:
* matching of UDP-Lite packets
* LOG support
* header file support
--
include/net/xfrm.h|2 ++
net/ipv4/netfilter/ipt_LOG.c | 11 ---
net/ipv4/xfrm4_policy.c |1 +
net/ipv6/netfilter/ip6t_LOG.c | 10
The self-contained UDP-Litev4 module for v4; logically completely separate from
ipv4/udp.c.
--
include/net/udplite.h | 86 +++
net/ipv4/udplite.c| 186 ++
2 files changed, 272 insertions(+)
diff --git
Gerrit Renker wrote:
Basic xfrm and netfilter support for UDP-Lite:
* matching of UDP-Lite packets
* LOG support
* header file support
--
--- a/net/netfilter/xt_multiport.c
+++ b/net/netfilter/xt_multiport.c
@@ -161,8 +161,9 @@ check(u_int16_t proto,
u_int8_t count)
{
Alexey Dobriyan wrote:
sparse defined twice warning
Thanks, applied with some manual fixup. Please base netfilter patches on
the net-2.6.19 tree.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
I have some review comments about your driver; please
consider them for
fixing
Thanks.
+ spin_unlock_irq(phy_lock);
+ msleep(10);
+ spin_lock_irq(phy_lock);
+ }
hmm some places take phy_lock with disabling interrupts, while others
don't. I
Hi,
Does anyone can tell me why some of my patches were blocked in the
mailing list.
I do not use attachment. The body of the mail is not exceed 40KB in
size.
Roy
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More
On Tue, Sep 19, 2006 at 04:33:17PM +0800, Zang Roy-r61911 wrote:
Hi,
Does anyone can tell me why some of my patches were blocked in the
mailing list.
I do not use attachment. The body of the mail is not exceed 40KB in
size.
Roy
We are filtering by means of bogofilter, and we are
On Tue, 2006-09-19 at 16:33 +0800, Zang Roy-r61911 wrote:
Hi,
Does anyone can tell me why some of my patches were blocked in the
mailing list.
I do not use attachment. The body of the mail is not exceed 40KB in
size.
Roy
A snippet from the 'Bogofilter at VGER' announcment:
...
On Tue, 2006-09-19 at 16:50, Matti Aarnio wrote:
On Tue, Sep 19, 2006 at 04:33:17PM +0800, Zang Roy-r61911 wrote:
Hi,
Does anyone can tell me why some of my patches were blocked in
the
mailing list.
I do not use attachment. The body of the mail is not exceed
40KB in
size.
On Tuesday 19 September 2006 06:41, Stephen Hemminger wrote:
Bert's attempt was noble
It showed your desire for the truth
A simple path exists
I guess most people won't have a clue on what to configure here
(especially with such sparse help text, but even with more
it would be hard).
And
On Saturday 16 September 2006 02:41, Xiaoliang (David) Wei wrote:
Hi Daniel,
Thank you very much for the patch and the reference summary. For
the implementation and performance of pacing, I just have a few
suggestion/clarification/support data:
First, in the implementation in the
Ok, I will resend the patch in a moment. I tested it with cg-* tools and
it did not create any conflicts with davem branch. The email programs with
automatic line wrapping are really tricky, seems like mail or mailx
really the only options.
--
Miika Komu
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:
http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt
The patch provides only single family support (i.e. inner family =
outer family).
Signed-off-by: Diego
Ah, forgot to add new files to version control, sorry. My bad...
--
Miika Komu http://www.iki.fi/miika/
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
* Andi Kleen | 2006-09-19 12:03:51 [+0200]:
How about a single auto selection heuristic: e.g. check the handshake
latencies
and if they are too long switch from reno to the newer one deemed most
stable?
Thats absolute no practicable solution to discover the 'right' algorithm.
The latenzy is
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:
http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt
The patch provides only single family support (i.e. inner family =
outer family).
Signed-off-by: Diego
On Tue, 19 Sep 2006, Miika Komu wrote:
Ah, forgot to add new files to version control, sorry. My bad...
The last patch I sent should be fine.
--
Miika Komu http://www.iki.fi/miika/
-
To unsubscribe from this list: send the line unsubscribe netdev in
the
Quoting Miika Komu [EMAIL PROTECTED]:
On Tue, 19 Sep 2006, Miika Komu wrote:
Ah, forgot to add new files to version control, sorry. My bad...
The last patch I sent should be fine.
Yes, this patch taken from the mail works just fine.
-
To unsubscribe from this list: send the line
If this fixes the issue then what else can i say?.. ;-)
However, isn't it better to just change RTL8150_MTU to 1500 instead of
removing that line?
Petko
On Sun, 17 Sep 2006, Lennert Buytenhek wrote:
The rtl8150 (ethernet) driver uses a default MTU of 1540, which causes
its rather big (4000+ lines) so i am posting a url here instead.
this reduces net/atm/lec.c by about 17k.
ftp://ftp.cmf.nrl.navy.mil/pub/chas/netdev/lec-cleanup-diff
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_init.c
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_init.c
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_init.c 2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_init.c 2006-09-19
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.c
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.c
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.c 2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.c 2006-09-19
07:51:20.0
Randy,
Thanks for feedback. We have incorporated all of the suggestions.
--
pradeep
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_main.c
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_main.c
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_main.c 2006-09-15
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_ethtool.c
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_ethtool.c
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_ethtool.c2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_ethtool.c
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_niu.c
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_niu.c
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_niu.c2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_niu.c2006-09-19
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic.h
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic.h
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic.h2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic.h2006-09-19
07:51:20.0 -0700
@@
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.h
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.h
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.h 2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_hw.h 2006-09-19
07:51:20.0
On Tue, 19 Sep 2006 12:03:51 +0200
Andi Kleen [EMAIL PROTECTED] wrote:
On Tuesday 19 September 2006 06:41, Stephen Hemminger wrote:
Bert's attempt was noble
It showed your desire for the truth
A simple path exists
I guess most people won't have a clue on what to configure here
diff -u linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_phan_reg.h
linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_phan_reg.h
--- linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_phan_reg.h 2006-09-15
10:51:59.0 -0700
+++ linux-2.6.18-rc7/drivers/net/netxen/netxen_nic_phan_reg.h
From: Hagen Paul Pfeifer [EMAIL PROTECTED]
Date: Tue, 19 Sep 2006 14:35:35 +0200
BTW: BIC is sometimes to aggressive in comparison to standard tcp
behaviour (e.g. in short RTT environments) - this is an known
issue. Why not cubic as the default one?
We may change over to CUBIC as the default
PCI error recovery code recently merged needs to use netdev_priv
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/ixgb/ixgb_main.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index
Sogned-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_ethtool.c | 14 +++---
drivers/net/e1000/e1000_hw.c | 84 +++--
drivers/net/e1000/e1000_hw.h | 18
We keep getting requests from people that think that this might be
an exploitable hole where we would overwrite 4 bytes in the netdev
struct if the pci name would exceed 15 characters. In reality this
will never happen but we fix it anyway.
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
With a patch, ethtool can now signify the driver to advertise more
than just a single speed/duplex setting. This allows you to tell the
card to advertise in 10/100 in any speed if you don't have a gigabit
switch for instance.
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok
Refine cb cleaning debug printout and print out all cleaned cbs' status. Add
debug flag for EEPROM csum failures that were overridden by the user.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e100.c |9 ++---
1 files
Cc: Herbert Xu [EMAIL PROTECTED]
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_main.c | 52
1 files changed, 42 insertions(+), 10 deletions(-)
diff --git
We experimented with more descriptor buffer writebacks and found that
values larger than 8 give HW problems, but 8 is safe and gives us some
improved performance.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/ixgb/ixgb.h |2 +-
Several hardware bits were set all over the driver and have been
consolidated into a single function.
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_hw.c | 142 +---
Several manageability capability detection parts hinted towards
our code being incomplete for PCI-E. According to spec, we do not
want to poke any MANC bits at all.
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_main.c | 15
Several minor issues exist in the low-level device handling code of
e1000. The NVM and EEPROM writing/reading code was updated which fixes
unneeded delays, adds proper eeprom aqcuiring steps and handle shadow
ram and flash access. Minor cosmetic adjustments to the polarity code
adding symbols.
Disable jumbo frames for 82573L alltogether and when ASPM is enabled
since the hardware has problems with it. For the NICs that do support
this in the 82573 series we set ERT_2048 to attempt to receive as much
traffic as early as we can.
Signed-off-by: Bruce Allan [EMAIL PROTECTED]
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_hw.c | 89 +-
1 files changed, 53 insertions(+), 36 deletions(-)
diff --git a/drivers/net/e1000/e1000_hw.c
Add code to display the detected PCI-E bus width.
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_hw.c | 17 +
drivers/net/e1000/e1000_hw.h |6 ++
drivers/net/e1000/e1000_main.c | 16
We were plagued by our interrupt handler posting a watchdog event which
could occur when our adapter was going down in case a late packet arrived
just before e1000_down() finished. This caused the watchdog timer to start
after the NIC was down and keep rescheduling it every N seconds. Once
the
Hi,
The following updates are available through git:
git pull git://lost.foo-projects.org/~ahkok/git/netdev-2.6 upstream
And apply against c233289c29369dba7177ca873e9b8ed457af2a78 (Jeff Garzik:
drivers/net/phy/fixed: #if 0 some incomplete code)
Cheers,
Auke
---
Auke Kok [EMAIL PROTECTED]:
Manageability is using one more RAR entry than we anticipated earlier
for ICH8.
Signed-off-by: Jeff Kirsher [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_hw.h |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git
e100-3.5.17-k2
e1000-7.2.9-k2
ixgb-1.0.117-k2
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e100.c |2 +-
drivers/net/e1000/e1000_main.c |2 +-
drivers/net/ixgb/ixgb_main.c |2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git
Signed-off-by: Nicholas Nunley [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000.h | 21 --
drivers/net/e1000/e1000_ethtool.c | 15 +
drivers/net/e1000/e1000_hw.c | 406 +++--
drivers/net/e1000/e1000_hw.h
Signed-off-by: Bruce Allan [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_main.c |6 +-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 7a991a4..dc14b98 100644
Signed-off-by: Mitch Williams [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_ethtool.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/e1000/e1000_ethtool.c
b/drivers/net/e1000/e1000_ethtool.c
index
Unify our shutdown/suspend/resume code and make it similar to e1000:
e1000_shutdown now calls suspend which does the exact same thing on
shutdown except saving PCI config state on suspend. WoL setup code
is now also more simple and works even when CONFIG_PM is not set, which
was previously
On Tue, 19 Sep 2006 09:10:37 -0700 (PDT)
David Miller [EMAIL PROTECTED] wrote:
From: Hagen Paul Pfeifer [EMAIL PROTECTED]
Date: Tue, 19 Sep 2006 14:35:35 +0200
BTW: BIC is sometimes to aggressive in comparison to standard tcp
behaviour (e.g. in short RTT environments) - this is an known
From: Auke Kok [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
e1000.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/e1000.c b/e1000.c
index 6de27ca..6741323 100644
--- a/e1000.c
+++ b/e1000.c
@@ -372,7 +372,7 @@ e1000_dump_regs(struct ethtool_drvinfo
Hello again,
It seems nobody received the message below; likely because the SMTP
server at work refused to forward a message from [EMAIL PROTECTED] .
Sorry about the delay.
On Sun, 2006-09-17 at 15:12 -0400, Adam C Powell IV wrote:
Hello, and apologies for the reply delay. (This is a
From: Nicholas Nunley [EMAIL PROTECTED]
This adds support for dumping ixgb registers in readable format.
Signed-off-by: Nicholas Nunley [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
Makefile.am|4 +-
ethtool-util.h |3 +
ethtool.c |2 +
ixgb.c |
On Tue, Sep 19, 2006 at 02:54:33PM +1000, Stephen Rothwell wrote:
On powerpc and ppc, insl_ns and insl are identical as are outsl_ns and
outsl, so remove the conditional use of insl_ns and outsl_ns.
The rest of this patch might indeed be correct, but the above comment
bothers me. The ns
Auke Kok wrote:
From: Auke Kok [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
e1000.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/e1000.c b/e1000.c
index 6de27ca..6741323 100644
--- a/e1000.c
+++ b/e1000.c
@@ -372,7 +372,7 @@
Jeff Kirsher wrote:
On 9/5/06, Jeff Kirsher [EMAIL PROTECTED] wrote:
adds the ability to change the advertised speed and duplex for a
network interface. Previously, a network interface was only able to
advertise all supported speed's and duplex's, or one individual speed
and duplex. The
applied
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Kok, Auke wrote:
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -90,15 +90,6 @@ typedef enum {
e1000_100_full = 3
} e1000_speed_duplex_type;
-/* Flow Control Settings */
-typedef enum {
-e1000_fc_none = 0,
-e1000_fc_rx_pause = 1,
-e1000_fc_tx_pause
Kok, Auke wrote:
Refine cb cleaning debug printout and print out all cleaned cbs' status. Add
debug flag for EEPROM csum failures that were overridden by the user.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
ACK patch, NAK description: tainting
Actually, I take that back:
net/ipv4/sysctl_net_ipv4.c: In function
$,1rx(Btcp_congestion_default$,1ry(B:
net/ipv4/sysctl_net_ipv4.c:134: error: syntax error before $,1rx(B}$,1ry(B
token
net/ipv4/sysctl_net_ipv4.c: At top level:
net/ipv4/sysctl_net_ipv4.c:136: warning: initialization
Kok, Auke wrote:
Signed-off-by: Mitch Williams [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_ethtool.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/e1000/e1000_ethtool.c
b/drivers/net/e1000/e1000_ethtool.c
ACK patches 6-7
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Mon, 18 Sep 2006 21:41:04 -0700
Bert's attempt was noble
It showed your desire for the truth
A simple path exists
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
Looks good, applied.
-
To unsubscribe from this list: send the line
Kok, Auke wrote:
Several hardware bits were set all over the driver and have been
consolidated into a single function.
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 9422864..a143b49 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
Kok, Auke wrote:
Disable jumbo frames for 82573L alltogether and when ASPM is enabled
since the hardware has problems with it. For the NICs that do support
this in the 82573 series we set ERT_2048 to attempt to receive as much
traffic as early as we can.
Signed-off-by: Bruce Allan [EMAIL
Ok, I really give up, after adding the missing semicolon I now
get this:
net/ipv4/sysctl_net_ipv4.c:136: warning: initialization from incompatible
pointer type
This is getting rediculious.
Folks, don't post patches which are not request for comments
explicitly in the subject line without
Make some netfilter globals __read_mostly at the request of Patrick McHardy.
Signed-off-by: Brian Haley [EMAIL PROTECTED]
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index aa45917..2370245 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++
Kok, Auke wrote:
The commit 'e1000: Remove 0x1000 as supported device' (Jeff Kirsher,
673a052fde79ab5e9dce569b0336358812ddba2d) Removes PIC device ID 8086:1000
from the list of supported devices. A fix was submitted for the original
issue (commit 6a9516989f94df10d9a27ba543c6b53b3e69c84a).
This
ACK
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Kok, Auke wrote:
When powering down the PHY (if WoL is disabled) we should only check
copper PHY's and handle PCI-E adapters differently.
Signed-off-by: Bruce Allan [EMAIL PROTECTED]
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
drivers/net/e1000/e1000_main.c | 41
ACK patches 15-16
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 19, 2006 at 08:52:18PM +0200, Matt Sealey wrote:
[...]
Linas Vepstas wrote:
On Tue, Sep 19, 2006 at 02:54:33PM +1000, Stephen Rothwell wrote:
On powerpc and ppc, insl_ns and insl are identical as are outsl_ns and
outsl, so remove the conditional use of insl_ns and outsl_ns.
ACK patches 21-23
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
My preference would be for drivers not to use LLTX (except loopback) and just
use the dev-xmit_lock via netif_tx_lock if possible. Something like this for
e1000.
Subject: [PATCH] e1000 no lltx
Get rid of lockless transmit for e1000. Use netif_tx_lock instead
of having to do locking in device.
From: chas williams - CONTRACTOR [EMAIL PROTECTED]
Date: Sat, 16 Sep 2006 20:19:02 -0400
please consider for 2.6.18 -- thanks!
[ATM]: [he] don't hold the device lock when upcalling
This can create a deadlock/lock ordering problem with other layers that
want to use the transmit (or other)
From: Patrick McHardy [EMAIL PROTECTED]
Date: Mon, 18 Sep 2006 11:43:49 +0200
D'oh. Fixed patch attached.
Looks good Patrick, applied.
Thanks.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
From: chas williams - CONTRACTOR [EMAIL PROTECTED]
Date: Sat, 16 Sep 2006 20:19:21 -0400
please consider for 2.6.18 -- thanks!
[ATM]: potential NULL pointer dereference in clip_mkip()
http://article.gmane.org/gmane.linux.kernel/445717
When re-processing received data, a struct sk_buff
Jeff Garzik wrote:
Kok, Auke wrote:
Unify our shutdown/suspend/resume code and make it similar to e1000:
e1000_shutdown now calls suspend which does the exact same thing on
shutdown except saving PCI config state on suspend. WoL setup code
is now also more simple and works even when CONFIG_PM
On Mon, 11 Sep 2006 11:35:11 +1000
Andrew Hall [EMAIL PROTECTED] wrote:
Stephen,
After some serious testing, this patch seems to fix the lockup issue
completely. I manually applied these changes against the 2.6.17.13 release.
Any more problems?
-
To unsubscribe from this list: send the
Auke Kok wrote:
Jeff Garzik wrote:
Kok, Auke wrote:
Unify our shutdown/suspend/resume code and make it similar to e1000:
e1000_shutdown now calls suspend which does the exact same thing on
shutdown except saving PCI config state on suspend. WoL setup code
is now also more simple and works even
Bert's attempt was noble
It showed your desire for the truth
A simple path existed
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
---
net/ipv4/Kconfig | 39 +--
net/ipv4/sysctl_net_ipv4.c |6 ++
net/ipv4/tcp_cong.c|2 +-
3
Jeff Garzik wrote:
Kok, Auke wrote:
The commit 'e1000: Remove 0x1000 as supported device' (Jeff Kirsher,
673a052fde79ab5e9dce569b0336358812ddba2d) Removes PIC device ID 8086:1000
from the list of supported devices. A fix was submitted for the original
issue (commit
Auke Kok wrote:
Jeff Garzik wrote:
Kok, Auke wrote:
The commit 'e1000: Remove 0x1000 as supported device' (Jeff Kirsher,
673a052fde79ab5e9dce569b0336358812ddba2d) Removes PIC device ID
8086:1000
from the list of supported devices. A fix was submitted for the original
issue (commit
looks OK except for the tasklet, which may starve if the lock is being
held upon entry
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 19 Sep 2006 16:45:06 -0400
Jeff Garzik [EMAIL PROTECTED] wrote:
looks OK except for the tasklet, which may starve if the lock is being
held upon entry
Why would the tasklet starve anymore than NAPI?
Worst case, the transmitters fill the ring completely and have to
wait for the
Jeff Garzik wrote:
FYI, note that I killed some OS wrappers from osdep.h in e1000 and ixgb
excellent, I am ashamed I didn't get to that myself yet :)
Thanks!
Auke
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo
This patch already is in 2.6.17 stable, but the bigger version was pushed
off till 2.6.19. Here is a less intrusive version that needs to go into 2.6.18
(or I'll end up sending it for 2.6.18.1). The driver was telling the
GMAC to flush (not process) pause frames. Manually disabling pause wasn't
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Tue, 19 Sep 2006 13:41:32 -0700
Bert's attempt was noble
It showed your desire for the truth
A simple path existed
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
Applied, but...
net/ipv4/Kconfig:607:warning: defaults for choice values
New tcp default config
means we can eliminate the hack
that was used previous
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
--- net-2.6.19.orig/net/ipv4/Kconfig2006-09-19 14:27:58.0 -0700
+++ net-2.6.19/net/ipv4/Kconfig 2006-09-19 14:28:17.0 -0700
@@ -602,10 +602,6 @@
On Tue, Sep 19, 2006 at 10:28:38AM -0700, Kok, Auke wrote:
Refine cb cleaning debug printout and print out all cleaned cbs' status. Add
debug flag for EEPROM csum failures that were overridden by the user.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Auke Kok
On Tue, Sep 19, 2006 at 02:20:07PM -0700, David Miller wrote:
Bert's attempt was noble
It showed your desire for the truth
It was also crap :-)
Applied, but...
net/ipv4/Kconfig:607:warning: defaults for choice values not supported
It does appear to do the right thing in all cases I throw
Dave Jones wrote:
On Tue, Sep 19, 2006 at 10:28:38AM -0700, Kok, Auke wrote:
Refine cb cleaning debug printout and print out all cleaned cbs' status. Add
debug flag for EEPROM csum failures that were overridden by the user.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Jeff Garzik wrote:
Kok, Auke wrote:
Unify our shutdown/suspend/resume code and make it similar to e1000:
e1000_shutdown now calls suspend which does the exact same thing on
shutdown except saving PCI config state on suspend. WoL setup code
is now also more simple and works even when CONFIG_PM
On Tue, Sep 19, 2006 at 02:32:09PM -0700, Stephen Hemminger wrote:
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
#
1 - 100 of 150 matches
Mail list logo
