Marcel Holtmann mar...@holtmann.org writes:
we introduced DEVTYPE in uevent a long time ago. That is what
userspace should be using and not second guessing on interface names.
Yes, sorry for confusing this by mentioning the device name. This is
really about DEVTYPE.
usbnet minidrivers use
Hi Bjorn,
Hmm. Oliver is marked as the maintainer of the USB CDC code, but
others have touched it more recently. So I'm just wildly adding people
to the cc to comment on this patch and maybe apply it.
Oliver/David/Ben/Bjørn?
Adding Aleksander and Dan, too. The 'wwanX' vs 'usbX'
From: Hiroshi Shimamoto h-shimam...@ct.jp.nec.com
Make PF returns an error to VF multicast promiscuous mode if the VF is not
trusted. On VF, check the result from PF and fallback to previous behavior
that only 30 addresses are registered.
Signed-off-by: Hiroshi Shimamoto
From: Hiroshi Shimamoto h-shimam...@ct.jp.nec.com
Add ixgbevf_request_mc_promisc_vf which is for request VF multicast
promiscuous mode, and move the codes from ixgbevf_update_mc_addr_list_vf.
Signed-off-by: Hiroshi Shimamoto h-shimam...@ct.jp.nec.com
---
drivers/net/ethernet/intel/ixgbevf/vf.c
From: Hiroshi Shimamoto h-shimam...@ct.jp.nec.com
Send a ping to reset VF on changing the status of trusting.
VF driver will reconfigure its features on reset.
Signed-off-by: Hiroshi Shimamoto h-shimam...@ct.jp.nec.com
---
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 25
On Sun, 2015-06-14 at 13:51 -1000, Linus Torvalds wrote:
Hmm. Oliver is marked as the maintainer of the USB CDC code, but
I do CDC ACM, CDC WDM and CDC Ether, but not CDC NCM (it is a
very different beast)
others have touched it more recently. So I'm just wildly adding people
to the cc to
-Original Message-
From: Rose, Gregory V
Sent: Tuesday, May 26, 2015 7:01 PM
To: Hiroshi Shimamoto; Skidmore, Donald C; Kirsher, Jeffrey T; intel-wired-
l...@lists.osuosl.org
Cc: nhor...@redhat.com; jogre...@redhat.com; Linux Netdev List; Choi,
Sy Jong; Rony Efraim; David
Any inputs on this ?
Regards,
Punnaiah
On Tue, May 26, 2015 at 9:23 PM, punnaiah choudary kalluri
punn...@xilinx.com wrote:
Hi,
I have a design for adding the sgmii support to the Ethernet mac.
The Ethernet mac is interfaced to the SGMII core and the mdio interface
from the mac is connected
Le 15/06/2015 09:23, Nicolas Dichtel a écrit :
Le 14/06/2015 21:12, Oliver Hartkopp a écrit :
@Nicolas: Just saw that you were not responsible for the @NONE m)
Sorry.
Btw. do you know why this @NONE stuff just emerged in 4.1-rc ?
Yes, it comes from the iflink cleanup in kernel:
Expose the service ID on an incoming CM or SIDR request to the event
handler. This will allow the RDMA CM module to de-multiplex connection
requests based on the information encoded in the service ID.
Signed-off-by: Haggai Eran hagg...@mellanox.com
---
drivers/infiniband/core/cm.c | 3 +++
Linus Torvalds torva...@linux-foundation.org writes:
Hmm. Oliver is marked as the maintainer of the USB CDC code, but
others have touched it more recently. So I'm just wildly adding people
to the cc to comment on this patch and maybe apply it.
Oliver/David/Ben/Bjørn?
Adding Aleksander and
Hi Bjorn,
we introduced DEVTYPE in uevent a long time ago. That is what
userspace should be using and not second guessing on interface names.
Yes, sorry for confusing this by mentioning the device name. This is
really about DEVTYPE.
usbnet minidrivers use FLAG_WWAN to set both the
When receiving a connection request, rdma_cm needs to associate the request
with a network device, in order to disambiguate requests. To do this, it
needs to know the request's destination IP. For this the module needs to
allow getting this information from the private data in the request packet,
Enabling network namespaces for RDMA CM will allow processes on different
namespaces to listen on the same port. In order to leave namespace support
out of the CM layer, this requires that multiple RDMA CM IDs will be able
to share a single CM ID.
This patch adds infrastructure to retrieve an
The rdma_cm module relies today on the ib_cm module to demux incoming
requests based on their service ID and IP address. The ib_cm module is the
wrong place to perform this task, as it can also be used with services that
do not adhere to the RDMA IP CM service as defined in the IBA
specifications.
From: Guy Shapiro gu...@mellanox.com
Implement the get_net_device_by_port_pkey_ip callback that returns network
device to ib_core according to connection parameters. Check the ipoib
device and iterate over all child devices to look for a match.
For each IPoIB device we iterate through all upper
Now that there are no ib_cm clients using the compare_data feature for
matching IB CM requests' private data, remove the compare_data parameter of
ib_cm_listen and remove the code implementing the feature.
Signed-off-by: Haggai Eran hagg...@mellanox.com
---
drivers/infiniband/core/cm.c
Instead of relying on a the ib_cm module to check an incoming CM request's
private data header, add these checks to the RDMA CM module. This allows a
following patch to to clean up the ib_cm interface and remove the code that
looks into the private headers. It will also allow supporting namespaces
Pass incoming request parameters through the relevant IPv4/IPv6 routing
tables and make sure the network stack is configured to handle such
requests.
Signed-off-by: Haggai Eran hagg...@mellanox.com
---
drivers/infiniband/core/cma.c | 100 --
1 file
Use ib_cm_id_create_and_listen to create listening IB CM IDs or share
existing ones if needed. When given a request on a specific CM ID, the code
now matches the request to the RDMA CM ID based on the request parameters,
so it no longer needs to rely on the ib_cm's private data matching
Add helper functions to access the IDRs by port-space and port number.
Pass around the port-space enum in cma.c instead of using pointers to
port-space IDRs.
Signed-off-by: Haggai Eran hagg...@mellanox.com
Signed-off-by: Yotam Kenneth yota...@mellanox.com
Signed-off-by: Shachar Raindel
The destination GID can be used to uniquely resolve the request. Expose the
GID in SIDR request events when it is available, so that the rdma_cm module
can use that information.
Signed-off-by: Haggai Eran hagg...@mellanox.com
---
drivers/infiniband/core/cm.c | 7 +++
include/rdma/ib_cm.h
From: Yotam Kenneth yota...@mellanox.com
In the case of IPoIB, and maybe in other cases, the network device is
managed by an upper-layer protocol (ULP). In order to expose this
network device to other users of the IB device, let ULPs implement
a callback that returns network device according to
Suppose that we're trying to use an xt_string netfilter module to match a
string in a specially crafted packet that has a nice string starting at
offset 28.
It could be done in iptables like this:
-A some_chain -m string --string a nice string --algo bm --from 28 --to 38 -j
DROP
And it would
-Original Message-
From: Eric Dumazet [mailto:eric.duma...@gmail.com]
On Wed, 2015-06-10 at 07:38 +, Madalin-Cristian Bucur wrote:
Hi Eric,
Can you please tell us if this change would be for the better?
I was about to say yes to this request but checked and no other
Hello.
On 6/15/2015 4:52 PM, Scott Feldman wrote:
From: Scott Feldman sfel...@gmail.com
skb-fwd_mark and dev-fwd_mark are 32-bit and should be unique for device
and maybe even unique for a sub-set of ports within device, so add
switchdev helper function to generate unique marks based on
Sua caixa de correio excedeu o limite de armazenamento, que é de 20 GB
como definido pelo administrador, está atualmente em execução no 20,9
GB, você pode não ser capaz de enviar ou receber novas mensagens até
que você re-validar sua caixa de correio. Para re-validar sua caixa de
correio, por
-Original Message-
From: Eric Dumazet [mailto:eric.duma...@gmail.com]
On Wed, 2015-04-29 at 17:56 +0300, Madalin Bucur wrote:
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,
BMan, PAMU and FMan
On 12/06/15 19:51, Jarod Wilson wrote:
Without this change, modprobe -r sfc hits the BUG_ON() in
efx_pci_remove_main(). Best as I can tell, this was just an oversight,
efx-state gets set to STATE_UNINIT in the error path of
efx_register_netdev() just after unregister_netdevice(), and the same
On Sun, Jun 14, 2015 at 10:46 PM, Jiri Pirko j...@resnulli.us wrote:
Sun, Jun 14, 2015 at 07:50:13PM CEST, sfel...@gmail.com wrote:
On Sat, Jun 13, 2015 at 11:56 PM, Jiri Pirko j...@resnulli.us wrote:
Sat, Jun 13, 2015 at 08:04:28PM CEST, sfel...@gmail.com wrote:
From: Scott Feldman
On 6/13/15, 11:04 AM, sfel...@gmail.com wrote:
From: Scott Feldman sfel...@gmail.com
(RFC because we're at rc7+ now)
With switchdev support for offloading L2/L3 forwarding data path to a
switch device, we have a general problem where both the device and the
kernel may forward the packet,
On Fri, Jun 12, 2015 at 12:24:47PM -0700, Mahesh Bandewar wrote:
Actor and Partner details can be accessed via proc-fs and sys-fs
entries. These interfaces are world readable at this moment. The
earlier patch-series made the LACP communication secure to avoid
nuisance attack from within the
The control !hlist_unhashed() in qfq_destroy_agg() is unnecessary
because already performed in hlist_del_init(), so remove it.
Signed-off-by: Andrea Parri parri.and...@gmail.com
---
net/sched/sch_qfq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/sched/sch_qfq.c
On Sun, Jun 14, 2015 at 04:36:34PM +0300, Nikolay Aleksandrov wrote:
Export the actor_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
actor_oper state, it is already exported via bond's proc entry.
Signed-off-by: Nikolay
On Sun, Jun 14, 2015 at 04:36:35PM +0300, Nikolay Aleksandrov wrote:
Export the partner_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
partner_oper state, it is already exported via bond's proc entry.
Signed-off-by:
Hi Nicholas,
On 12 June 2015 at 20:58, Nicholas Mc Guire der.h...@hofr.at wrote:
Hi !
commit 2c86c275015c (Add ipw2100 wireless driver.) introduced
drivers/net/wireless/ipw2100.c - line-numbers are from next-20150511
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1411 {
I'm using command 'ip link set ge0/0 name ge5/1' to rename interface name
from ge0/0 to ge5/0. when command complete, command 'ifconfig' and 'cat
/proc/net/dev ' both can output information of ge5/0,however command 'ls
/sys/class/net/' output ls: /sys/class/net/ge5/0: No such file or
directory.
On 6/13/15, 11:04 AM, sfel...@gmail.com wrote:
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 6f5f71f..181b08f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1444,6 +1444,8 @@ enum netdev_priv_flags {
*
*@xps_maps: XXX: need
Hello,
This patch series fixes the Ethernet jumbo frames support for Armada 370
SoCs. Unlike Armada XP, the Ethernet controller in Armada 370 SoCs don't
support TCP/IP checksumming with frames largest than 1600 Bytes.
This patches should be applied to the -stable kernels 3.8 and onwards.
On Mon, Jun 15, 2015 at 04:27:22PM +0200, Simon Guinot wrote:
This patch introduces the tx_csum_limit DT property. This allows to
configure the maximum frame size for which the Ethernet controller is
able to perform TCP/IP checksumming. If MTU is set to a value greater
than tx_csum_limit, then
Russell,
On Mon, 15 Jun 2015 15:36:01 +0100, Russell King - ARM Linux wrote:
On Mon, Jun 15, 2015 at 04:27:22PM +0200, Simon Guinot wrote:
This patch introduces the tx_csum_limit DT property. This allows to
configure the maximum frame size for which the Ethernet controller is
able to
Dear Simon Guinot,
On Mon, 15 Jun 2015 16:27:22 +0200, Simon Guinot wrote:
This patch introduces the tx_csum_limit DT property. This allows to
configure the maximum frame size for which the Ethernet controller is
able to perform TCP/IP checksumming. If MTU is set to a value greater
than
This implements SLUB specific kmem_cache_free_bulk(). SLUB allocator
now both have bulk alloc and free implemented.
Play nice and reenable local IRQs while calling slowpath.
Signed-off-by: Jesper Dangaard Brouer bro...@redhat.com
---
mm/slub.c | 32 +++-
1 file
On Mon, 15 Jun 2015 11:13:12 +0200
Nicolas Dichtel nicolas.dich...@6wind.com wrote:
Theoretically, virtual interfaces should advertise an IFLA_LINK to 0.
I don't know what is the best fix:
- patching iproute2 to avoid this '@NONE'
- patching the kernel (see below).
Sorry this is an ABI
With this patchset SLUB allocator now both have bulk alloc and free
implemented.
(This patchset is based on DaveM's net-next tree on-top of commit
c3eee1fb1d308. Tested patchset applied on-top of volatile linux-next
commit aa036f86e1bf (slub bulk alloc: extract objects from the per
cpu slab))
From: Christoph Lameter c...@linux.com
[NOTICE: Already in AKPM's quilt-queue]
First piece: acceleration of retrieval of per cpu objects
If we are allocating lots of objects then it is advantageous to disable
interrupts and avoid the this_cpu_cmpxchg() operation to get these objects
faster.
From: Christoph Lameter c...@linux.com
[NOTICE: Already in AKPM's quilt-queue]
Add the basic infrastructure for alloc/free operations on pointer arrays.
It includes a generic function in the common slab code that is used in
this infrastructure patch to create the unoptimized functionality for
The current kmem_cache/SLAB bulking API need to release all objects
in case the layer cannot satisfy the full request.
If __kmem_cache_alloc_bulk() fails, all allocated objects in array
should be freed, but, __kmem_cache_alloc_bulk() can't know
about objects allocated by this slub specific
Use kernel early return style to reduce indention level,
by testing for kmem_cache_debug() and fallback to
none-optimized bulking via __kmem_cache_alloc_bulk().
This also make it easier to fix a bug in the current
implementation, in the next patch.
Signed-off-by: Jesper Dangaard Brouer
The Ethernet controller found in Armada 370 SoCs don't support TCP/IP
checksumming with frames largest than 1600 Bytes.
This patch sets accordingly the tx_csum_limit property in Ethernet nodes
for Armada 370.
Signed-off-by: Simon Guinot simon.gui...@sequanux.org
Cc: sta...@vger.kernel.org #
Hi Paul,
Thank you very much for your feedback.
I'm planning to address the issues you've raised in the next submission.
Regards,
Igal Liberman.
-Original Message-
From: Paul Bolle [mailto:pebo...@tiscali.nl]
Sent: Thursday, June 11, 2015 12:38 PM
To: Bucur Madalin-Cristian-B32716
This patch introduces the tx_csum_limit DT property. This allows to
configure the maximum frame size for which the Ethernet controller is
able to perform TCP/IP checksumming. If MTU is set to a value greater
than tx_csum_limit, then the features NETIF_F_IP_CSUM and NETIF_F_TSO
are disabled.
From: Eran Ben Elisha era...@mellanox.com
Counter will get its port attribute within the resource tracker when
the first QP attached to it is modified to RTR. If a QP is counter-less,
an attempt to create a new counter with assigned port will be made.
Signed-off-by: Eran Ben Elisha
From: Eran Ben Elisha era...@mellanox.com
This is an infrastructure step to attach all the QPs opened from the
IB driver to a counter in order to collect VF stats from the PF using
those counters.
If the port's type is Ethernet, the counter policy demands two counters
per port (one for RoCE and
From: Eran Ben Elisha era...@mellanox.com
Implement the ndo to gather VF statistics through the PF.
All counters related to this VF are stored in a per slave
list, run over the slave's list and collect all statistics.
Signed-off-by: Eran Ben Elisha era...@mellanox.com
Signed-off-by: Hadar Hen
From: Eran Ben Elisha era...@mellanox.com
Allow the user to observe the PF own statistics using ethtool with pf_
prefixed counter names.
Those counters are the PF statistics out of the overall port statistics.
Every PF QP is attached to a counter and the summary of those counters
is the PF
From: Eran Ben Elisha era...@mellanox.com
This is an infrastructure step for querying VF and PF counters.
This code was in the IB driver, move it to the mlx4 core driver
so it will be accessible for more use cases.
Signed-off-by: Eran Ben Elisha era...@mellanox.com
Signed-off-by: Hadar Hen Zion
From: Eran Ben Elisha era...@mellanox.com
Since virtual functions get their counters indices allocation from the PF,
allocate counters indices bitmap only in case the function isn't virtual.
Also, check that the device has counters to allocate before creating the
indices bitmap table.
From: Eran Ben Elisha era...@mellanox.com
Default counter per port will be allocated at the mlx4 core driver load.
Every QP opened by the Ethernet driver will be attached to the port's default
counter. This is an infrastructure step to collect VF statistics from the PF.
Signed-off-by: Eran Ben
From: Eran Ben Elisha era...@mellanox.com
Reserve the last valid counter index for sink counter, when a
new counter cannot be allocated, the driver will use this counter.
In order to avoid allocating this counter on any other flow, fix the
indices bitmap allocation range, and reserve the sink
Pablo Neira Ayuso pa...@netfilter.org writes:
Hi Eric,
On Sun, Jun 14, 2015 at 10:07:30PM -0500, Eric W. Biederman wrote:
While looking into what it would take to route packets out to network
devices in other network namespaces I started looking at the netfilter
hooks, and there is a lot
On Mon, Jun 15, 2015 at 10:06:27AM -0500, Eric W. Biederman wrote:
Pablo Neira Ayuso pa...@netfilter.org writes:
Hi Eric,
On Sun, Jun 14, 2015 at 10:07:30PM -0500, Eric W. Biederman wrote:
While looking into what it would take to route packets out to network
devices in other
Call slowpath __slab_alloc() from within the bulk loop, as the
side-effect of this call likely repopulates c-freelist.
Choose to reenable local IRQs while calling slowpath.
Saving some optimizations for later. E.g. it is possible to
extract parts of __slab_alloc() and avoid the unnecessary and
On Mon, 15 Jun 2015 21:25:30 +0800
申晓欢 sxhli...@163.com wrote:
I'm using command 'ip link set ge0/0 name ge5/1' to rename interface name
from ge0/0 to ge5/0. when command complete, command 'ifconfig' and 'cat
/proc/net/dev ' both can output information of ge5/0,however command 'ls
Move clearing of objects outside IRQ disabled section,
to minimize time spend with local IRQs off.
Signed-off-by: Jesper Dangaard Brouer bro...@redhat.com
---
mm/slub.c | 11 ---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/mm/slub.c b/mm/slub.c
index
From: Eran Ben Elisha era...@mellanox.com
As IB VFs are not capable to read the port counters through MADs,
move there to read their own QP counters to gather statistics.
Signed-off-by: Eran Ben Elisha era...@mellanox.com
Signed-off-by: Hadar Hen Zion had...@mellanox.com
Signed-off-by: Or
From: Eran Ben Elisha era...@mellanox.com
Add ndo_get_vf_stats where the PF retrieves and fills the VFs traffic
statistics. We encode the VF stats in a nested manner to allow for
future extensions.
Signed-off-by: Eran Ben Elisha era...@mellanox.com
Signed-off-by: Hadar Hen Zion
Hi Dave,
This series from Eran and Hadar is further dealing with traffic
counters in the mlx4 driver, this time mostly around SRIOV.
We added a new ndo to read the VF counters through the PF netdev
netlink infrastructure plus mlx4 implementation for that ndo.
Or.
changes from V0:
- applied
From: Eran Ben Elisha era...@mellanox.com
Add resetting the counter data to the free counter flow, so the counter's
data won't be accessible anymore if querying the counter. Also, on next
counter allocation (to another VM for example), it will be fresh and clear.
Signed-off-by: Eran Ben Elisha
On Mon, 2015-06-15 at 13:40 +, Madalin-Cristian Bucur wrote:
-Original Message-
From: Eric Dumazet [mailto:eric.duma...@gmail.com]
On Wed, 2015-04-29 at 17:56 +0300, Madalin Bucur wrote:
This introduces the Freescale Data Path Acceleration Architecture
(DPAA) Ethernet
On Mon, Jun 15, 2015 at 04:49:52PM +0200, Thomas Petazzoni wrote:
Dear Simon Guinot,
On Mon, 15 Jun 2015 16:27:22 +0200, Simon Guinot wrote:
This patch introduces the tx_csum_limit DT property. This allows to
configure the maximum frame size for which the Ethernet controller is
able to
From: Eran Ben Elisha era...@mellanox.com
If counters are not supported by the device. The indices bitmap table is not
allocated during initialization. Add the symmetrical check before cleaning
the counters bitmap table or freeing a counter.
Signed-off-by: Eran Ben Elisha era...@mellanox.com
From: Eran Ben Elisha era...@mellanox.com
Each physical function has a guarantee of two counters per port, one
for a default counter and one for the IB driver.
Each virtual function has a guarantee of one counter per port.
All other counters are free and can be obtained on demand.
This is a
On 6/13/15, 11:04 AM, sfel...@gmail.com wrote:
From: Scott Feldman sfel...@gmail.com
skb-fwd_mark and dev-fwd_mark are 32-bit and should be unique for device
and maybe even unique for a sub-set of ports within device, so add
switchdev helper function to generate unique marks based on
On 6/13/15, 11:04 AM, sfel...@gmail.com wrote:
From: Scott Feldman sfel...@gmail.com
(RFC because we're at rc7+ now)
With switchdev support for offloading L2/L3 forwarding data path to a
switch device, we have a general problem where both the device and the
kernel may forward the packet,
This get_info handler will simply dispatch to the appropriate
existing inet protocol handler.
This patch also includes a new netlink attribute
(INET_DIAG_PROTOCOL). This attribute is currently only used
for multicast messages. Without this attribute, there is no
way of knowing the IP protocol
These groups will contain socket-destruction events for
AF_INET/AF_INET6, IPPROTO_TCP/IPPROTO_UDP.
Near the end of socket destruction, a check for listeners is
performed. In the presence of a listener, rather than completely
cleanup the socket, a unit of work will be added to a private
work
Previously, there was no clear distinction between the inet protocols
that used struct tcp_info to report information and those that didn't.
This change adds a specific size attribute to the inet_diag_handler
struct which defines these interfaces. This will make dispatching
sock_diag get_info
This series extends the netlink sock_diag interface to broadcast
socket information as they are being destroyed. The current
interface is poll based and can not be used to retreive information
about sockets that are destroyed between poll intervals.
Only inet sockets are broadcast in this
From: Edward Cree ec...@solarflare.com
Date: Mon, 15 Jun 2015 18:27:54 +0100
Without this change, modprobe -r sfc hits the BUG_ON() in
efx_pci_remove_main().
Fixes: e7fef9b45ae1 (sfc: add sysfs entry to control MCDI tracing)
Reported-by: Jarod Wilson ja...@redhat.com
Reviewed-by: Jarod
From: Fabian Frederick f...@skynet.be
Date: Mon, 15 Jun 2015 19:13:05 +0200
{
unsigned int i;
+ struct scatterlist *sg;
Please order local variables from longest to shortest line (reverse
christmas tree).
Thanks.
--
To unsubscribe from this list: send the line unsubscribe netdev
Thank you.
Suravee
On 6/15/15 18:24, Rafael J. Wysocki wrote:
On Wednesday, June 10, 2015 11:08:51 AM Suravee Suthikulpanit wrote:
This patch series introduce support for _CCA object, which is currently
used mainly by ARM64 platform to specify DMA coherency attribute for
devices when booting
From: Alexei Starovoitov a...@plumgrid.com
Date: Mon, 15 Jun 2015 20:49:24 -0700
Accessing current-pid/uid from cls_bpf may lead to misleading results and
should not be used when TC classifiers need accurate information about
pid/uid.
Signed-off-by: Alexei Starovoitov a...@plumgrid.com
On 15/06/2015 20:08, Jason Gunthorpe wrote:
On Mon, Jun 15, 2015 at 11:47:13AM +0300, Haggai Eran wrote:
Instead of relying on a the ib_cm module to check an incoming CM request's
private data header, add these checks to the RDMA CM module. This allows a
following patch to to clean up the
Hi Davem,
Can you please apply this patch series against net-next ?
Thanks
Praveen
From: Praveen Madhavan [prave...@chelsio.com]
Sent: Tuesday, June 09, 2015 6:44 PM
To: netdev@vger.kernel.org; linux-s...@vger.kernel.org
Cc: da...@davemloft.net;
On 6/15/15 4:01 PM, David Miller wrote:
Although I agree with the sentiment that this thing can cause
surprising results and can be asking for trouble.
If someone wants to filter traffic by UID they might make
a simple ingress TC ebpf program using these new interfaces
and expect it to work.
Accessing current-pid/uid from cls_bpf may lead to misleading results and
should not be used when TC classifiers need accurate information about pid/uid.
Signed-off-by: Alexei Starovoitov a...@plumgrid.com
---
net/core/filter.c |6 --
1 file changed, 6 deletions(-)
diff --git
HGN!
On Mon, Jun 15, 2015 at 11:36:54PM +0200, Hagen Paul Pfeifer wrote:
On 15 June 2015 at 22:54, Phil Sutter p...@nwl.cc wrote:
As I see it, a user has no way of detecting the listening socket in this
address family: it does not show in /proc/net/{tcp,udp} nor do
'netstat', 'ss' or
From: ebied...@xmission.com (Eric W. Biederman)
Date: Mon, 15 Jun 2015 19:26:13 -0500
So what I am in the processes of doing is reviewing and testing
the combined set of patches and hopefully I will have something
for you soon (tomorrow?). Unless Pablo has objections.
I will be travelling
From: Craig Gallek kr...@google.com
Date: Mon, 15 Jun 2015 11:26:17 -0400
This series extends the netlink sock_diag interface to broadcast
socket information as they are being destroyed. The current
interface is poll based and can not be used to retreive information
about sockets that are
Cc'ing Thomas.
On Mon, Jun 15, 2015 at 12:11:58PM +0300, Roman I Khimov wrote:
Suppose that we're trying to use an xt_string netfilter module to match a
string in a specially crafted packet that has a nice string starting at
offset 28.
It could be done in iptables like this:
-A
After the -set() spinlocks were removed br_stp_set_bridge_priority
was left running without any protection when used via sysfs. It can
race with port add/del and could result in use-after-free cases and
corrupted lists. Tested by running port add/del in a loop with stp
enabled while setting
On Mon, 15 Jun 2015, Stanislav Yakovlev wrote:
Hi Nicholas,
On 12 June 2015 at 20:58, Nicholas Mc Guire der.h...@hofr.at wrote:
Hi !
commit 2c86c275015c (Add ipw2100 wireless driver.) introduced
drivers/net/wireless/ipw2100.c - line-numbers are from next-20150511
1410 static int
thus fixed up to msecs_to_jiffies(50).
Signed-off-by: Nicholas Mc Guire hof...@osadl.org
---
Patch was compile tested with x86_64_defconfig + CONFIG_IPW2100=m
(with a few buildwarnings in ipw2100.c though not related to this patch)
Patch is against 4.1-rc7 (localversion-next is -next-20150615
Signed-off-by: John W. Linville linvi...@tuxdriver.com
---
include/linux/if_link.h | 1 +
ip/iplink_geneve.c | 23 ++-
man/man8/ip-link.8.in | 7 +++
3 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
Signed-off-by: John W. Linville linvi...@tuxdriver.com
---
include/linux/if_link.h | 1 +
ip/iplink_geneve.c | 26 +-
man/man8/ip-link.8.in | 6 ++
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
This pair of patches add configuration of TTL and TOS settings for
GENEVE tunnel packets. These settings follow the same conventions
as the VXLAN counterparts.
These patches include man page changes. Therefore, they depend on
the preceding iproute2: update ip-link.8 for geneve tunnels patch,
On Mon, Jun 15, 2015 at 02:37:15PM -0400, John W. Linville wrote:
Signed-off-by: John W. Linville linvi...@tuxdriver.com
---
include/linux/if_link.h | 1 +
This includes the include/linux/if_link.h bits, that will need to be
dropped after iproute2 does the 4.1 update for that file.
On Mon, Jun 15, 2015 at 02:37:16PM -0400, John W. Linville wrote:
Signed-off-by: John W. Linville linvi...@tuxdriver.com
---
include/linux/if_link.h | 1 +
This includes the include/linux/if_link.h bits, that will need to be
dropped after iproute2 does the 4.1 update for that file.
These kind of informations are only useful for debugging and should not be
displayed in normal modules message.
Signed-off-by: Romain Perier romain.per...@gmail.com
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 75 +-
1 file changed, 36 insertions(+), 39
1 - 100 of 193 matches
Mail list logo
