, this driver is blacklisted by
default - at least in Slackware and Debian.
The question is: why does de2104x exist? Does it work better with some
hardware?
BTW. Found that the problem exist at least since 2003:
http://oss.sgi.com/archives/netdev/2003-08/msg00951.html
--
Ondrej Zary
/
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 26 January 2008 21:58:10 Ondrej Zary wrote:
Hello,
I was having problems with these FreedomLine cards with Linux before but
tested it thoroughly today. This card uses DEC 21041 chip and has TP and
BNC connectors:
00:12.0 Ethernet controller [0200]: Digital Equipment Corporation
);
#endif
#ifdef CONFIG_MCA
- mca_unregister_driver(el3_mca_driver);
+ if (mca_registered)
+ mca_unregister_driver(el3_mca_driver);
#endif
}
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED
}
module_init (el3_init_module);
module_exit (el3_cleanup_module);
-
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 02 February 2008 21:50:25 Jeff Garzik wrote:
Ondrej Zary wrote:
Hello,
this is second version of the patch. Autoloading using udev works fine
with PnP card. Hibernation now works both in PnP and ISA modes. The I/O
address used for non-pnp ISA card detection is now not released
On Saturday 02 February 2008 22:07:20 Pekka Enberg wrote:
Hi,
On Feb 2, 2008 8:25 PM, Ondrej Zary [EMAIL PROTECTED] wrote:
+//static __be16 el3_phys_addr[EL3_MAX_CARDS][3];
[snip]
+//#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
[snip]
+// while (el3_probe(el3_cards) == 0
cards in various combinations of PnP and non-PnP modes.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-04 22:30:37.0
+0100
@@ -54,25 +54,24
cards in various combinations of PnP and non-PnP modes.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-04 22:30:37.0
+0100
@@ -54,25 +54,24
cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-07 17:58:45.0
cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-07 17:58:45.0
On Saturday 09 February 2008 22:48:05 Stephen Hemminger wrote:
On Sat, 9 Feb 2008 22:33:07 +0100
Ondrej Zary [EMAIL PROTECTED] wrote:
Hello,
this patch converts 3c509 driver to isa_driver and pnp_driver. The result
is that autoloading using udev and hibernation works with ISA PnP cards
cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-10 21:52:04.0
cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-10 21:52:04.0
cards in various combinations of PnP and non-PnP modes.
EISA and MCA only compile-tested.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/3c509.c 2008-01-27 19:48:19.0
+0100
+++ linux-2.6.24-pentium/drivers/net/3c509.c2008-02-10 21:52:04.0
On Monday 18 February 2008 04:21:11 Grant Grundler wrote:
On Wed, Jan 30, 2008 at 09:23:06PM +0100, Ondrej Zary wrote:
On Saturday 26 January 2008 21:58:10 Ondrej Zary wrote:
Hello,
I was having problems with these FreedomLine cards with Linux before
but tested it thoroughly today
When the chip dies (probably because of a bug somewhere in the driver),
de_stop_rxtx() fails and changing the media type crashes the whole machine.
Replace BUG_ON() in de_set_media() with a warning.
Signed-off-by: Ondrej Zary [EMAIL PROTECTED]
--- linux-2.6.24-orig/drivers/net/tulip/de2104x.c
(the TP-unplug problem is present at least since
2003).
Perhaps de4x5 could be ported to new API(s)? I think that it's much easier
than fixing obscure hardware-related problems like cable auto-detection.
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev
);
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Now that IP1000A chips are supported by dl2k driver, the buggy ipg driver
can be removed.
---
drivers/net/ethernet/Kconfig |1 -
drivers/net/ethernet/Makefile|1 -
drivers/net/ethernet/icplus/Kconfig | 13 -
drivers/net/ethernet/icplus/Makefile |5 -
);
--
Ondrej Zary
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sunday 15 November 2015 03:30:25 Andy Shevchenko wrote:
> On Sun, Nov 15, 2015 at 12:05 AM, Ondrej Zary
>
> <li...@rainbow-software.org> wrote:
> > Add support for IP1000A chips to dl2k driver.
> > IP1000A chip looks like a TC9020 with integrated PHY.
> >
>
On Sunday 15 November 2015 18:59:05 David Miller wrote:
> From: Andy Shevchenko <andy.shevche...@gmail.com>
> Date: Sun, 15 Nov 2015 04:30:25 +0200
>
> > On Sun, Nov 15, 2015 at 12:05 AM, Ondrej Zary
> >
> >> @@ -433,9 +474,10 @@ rio_open (struct net_device *de
Add suspend/resume support to dl2k driver.
Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c | 189 +
1 file changed, 128 insertions(+), 61 del
Now that IP1000A chips are supported by dl2k driver, the buggy ipg
driver can be removed.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
MAINTAINERS |7 -
drivers/net/ethernet/Kconfig |1 -
drivers/net/ethernet/Makefile
on both.
Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably
a rebranded TC9020):
vendor=0x1186 device=0x4000 (rev 0x0c)
subsystem vendor=0x1186 device=0x4000
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/Kconfig |5 ++--
drive
Add suspend/resume support to dl2k driver.
Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c | 46 +
1 file changed, 46 insertions(+)
diff
Move HW init and stop into separate functions.
Request IRQ only after the HW has been reset (so interrupts are
disabled and no stale interrupts are pending).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c
If memory allocation fails in alloc_list(), free the already allocated
memory and return -ENODEV. In rio_open(), call alloc_list() first and
abort if it fails. Move HW access (set RFDListPtr) out ot alloc_list().
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/et
and 1000Mbps.
Also verified that it does not break D-Link DGE-550T.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/Kconfig |5 ++--
drivers/net/ethernet/dlink/dl2k.c | 51 +---
drivers/net/ethernet/dlink/dl2k.h
Now that IP1000A chips are supported by dl2k driver, the buggy ipg
driver can be removed. The ipg driver loses packets under load and then
completely stops transmitting data.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
MAINTAINERS |7 -
drive
Handle IW_AUTH_ALG_OPEN_SYSTEM in set_auth.
This allows wpa_supplicant (and thus NetworkManager) to work with open APs.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/wireless/airo.c |7 +++
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/d
Add calls to netif_carrier_on and netif_carrier_off
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/wireless/airo.c |6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 2066a1f..1
On Monday 31 August 2015 22:44:54 Dan Williams wrote:
> On Mon, 2015-08-31 at 21:19 +0200, Ondrej Zary wrote:
> > Handle IW_AUTH_ALG_OPEN_SYSTEM in set_auth.
> > This allows wpa_supplicant (and thus NetworkManager) to work with open
> > APs.
> >
> > Signed-o
On Tuesday 01 September 2015 02:04:43 Dan Williams wrote:
> On Tue, 2015-09-01 at 00:12 +0200, Ondrej Zary wrote:
> > On Monday 31 August 2015 22:44:54 Dan Williams wrote:
> > > On Mon, 2015-08-31 at 21:19 +0200, Ondrej Zary wrote:
> > > > Handle IW_AU
On Tuesday 25 August 2015 23:26:13 Ondrej Zary wrote:
> On Tuesday 25 August 2015 23:04:30 David Miller wrote:
> > From: Ondrej Zary <li...@rainbow-software.org>
> > Date: Sun, 23 Aug 2015 23:06:27 +0200
> >
> > > Add support for IP1000A chips to dl2k driver.
&g
On Tuesday 25 August 2015 23:04:30 David Miller wrote:
From: Ondrej Zary li...@rainbow-software.org
Date: Sun, 23 Aug 2015 23:06:27 +0200
Add support for IP1000A chips to dl2k driver.
IP1000A chip looks like a TC9020 with integrated PHY.
Tested with Asus NX1101.
You're saying the PHY
Add calls to netif_carrier_on and netif_carrier_off
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/wireless/airo.c |6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index a8f2767..6
IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
wpa_supplicant uses it for both no encryption and WEP open system.
Cache the last mode set (only of these two) and use it here.
This allows wpa_supplicant to work with unencrypted APs.
Signed-off-by: Ondrej Zary <li...@rain
On Friday 18 September 2015 18:54:35 Dan Williams wrote:
> On Tue, 2015-09-15 at 17:18 +0200, Ondrej Zary wrote:
> > IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
> > wpa_supplicant uses it for both no encryption and WEP open system.
> > Cache the last mode s
IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
wpa_supplicant uses it for both no encryption and WEP open system.
Cache the last mode set (only of these two) and use it here.
This allows wpa_supplicant to work with unencrypted APs.
Signed-off-by: Ondrej Zary <li...@rain
Add calls to netif_carrier_on and netif_carrier_off
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/wireless/airo.c |5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 67001a8..8ae838d
IW_AUTH_ALG_OPEN_SYSTEM is ambiguous in set_auth for WEP as
wpa_supplicant uses it for both no encryption and WEP open system.
Cache the last mode set (only of these two) and use it here.
This allows wpa_supplicant to work with unencrypted APs.
Signed-off-by: Ondrej Zary <li...@rain
Add calls to netif_carrier_on and netif_carrier_off
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/wireless/airo.c |5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 67001a8..8ae838d
On Tuesday 17 November 2015, Francois Romieu wrote:
> Ondrej Zary <li...@rainbow-software.org> :
> [...]
>
> > diff --git a/drivers/net/ethernet/dlink/dl2k.c
> > b/drivers/net/ethernet/dlink/dl2k.c index 9e9baa0..b53dfa7 100644
> > --- a/drivers/net/ethernet/d
On Tuesday 17 November 2015, Francois Romieu wrote:
> Ondrej Zary <li...@rainbow-software.org> :
> > If memory allocation fails in alloc_list(), free the already allocated
> > memory and return -ENODEV. In rio_open(), call alloc_list() first and
> > abort if it
Add suspend/resume support to dl2k driver.
Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c | 55 +++--
1 file changed, 53 insertions(+), 2 del
If memory allocation fails in alloc_list(), free the already allocated
memory and return -ENOMEM. In rio_open(), call alloc_list() first and
abort if it fails. Move HW access (set RFDListPtr) out ot alloc_list().
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/et
Move HW init and stop into separate functions.
Request IRQ only after the HW has been reset (so interrupts are
disabled and no stale interrupts are pending).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c
If memory allocation fails in alloc_list(), free the already allocated
memory and return -ENOMEM. In rio_open(), call alloc_list() first and
abort if it fails. Move HW access (set RFDListPtr) out ot alloc_list().
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/et
Move HW init and stop into separate functions.
Request IRQ only after the HW has been reset (so interrupts are
disabled and no stale interrupts are pending).
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/dlink/dl2k.c
Add suspend/resume support to dl2k driver.
This requires RX/TX rings to be reset so split out the required
functionality from alloc_list() into new rio_reset_ring().
Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).
Signed-off-by: Ondrej Zary <li...@rainbow-software.
. When the
port autoselection is enabled or AUI port is selected, report the link
as always up.
Move pcnet32_suspend() and pcnet32_clr_suspend() functions to avoid
forward declarations.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/amd/pcnet32.c
Move the code to clear SUSPEND flag to a separate function to simplify
code.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/net/ethernet/amd/pcnet32.c | 21 ++---
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethern
On Tuesday 14 February 2017 20:28:56 David Miller wrote:
> From: Ondrej Zary <li...@rainbow-software.org>
> Date: Mon, 13 Feb 2017 23:45:47 +0100
>
> > Even though the port autoselection is enabled by default on AM79C970A,
> > BNC/AUI port does not work because
t; S=6 s=* pentium hint=0400 [
Computer ] (23)
^C
8 packets received by filter
$ obexftp -i -l MMC
Connecting..\done
Receiving "MMC".../
]>
$ obexftp -i -c MMC -g Image004.jpg
Connecting..\done
Sending "MMC"...|done
Receiving "Image004.jpg"...-done
Disconnecting..\done
--
Ondrej Zary
On Thursday 31 August 2017, Greg KH wrote:
> On Tue, Aug 29, 2017 at 11:32:58PM +0200, Ondrej Zary wrote:
> > On Tuesday 29 August 2017 01:42:08 David Miller wrote:
> > > From: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> > > Date: Sun, 27 Aug 2017 17:03:30
57 matches
Mail list logo
