Hi Jon,
In Subject line, you mean add amac entries.
On 16-07-08 08:56 AM, Jon Mason wrote:
Add device tree entries for the ethernet devices present on the
Broadcom Northstar Plus SoCs
Signed-off-by: Jon Mason
---
arch/arm/boot/dts/bcm-nsp.dtsi | 18
One change
On 16-11-09 01:33 AM, Yendapally Reddy Dhananjaya Reddy wrote:
Add documentation for mdio mux available in Broadcom NSP SoC
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
---
.../devicetree/bindings/net/brcm,mdio-mux-nsp.txt | 57
On 16-11-01 01:59 PM, Jon Mason wrote:
On Tue, Nov 01, 2016 at 09:48:26PM +0100, Andrew Lunn wrote:
+- enet-phy-lane-swap: If set, indicates the PHY device requires swapping the
+ TX/RX lanes to function properly.
Is 'requires' the right word here? The PHY performs the actual swap of
the
One change in this patch
On 16-11-01 01:04 PM, Jon Mason wrote:
Add support for the variant of amac hardware present in the Broadcom
Northstar2 based SoCs. Northstar2 requires an additional register to be
configured with the port speed/duplexity (NICPM). This can be added to
the link callback
Hi Jon,
On 16-11-01 10:51 AM, Jon Mason wrote:
Changes in v3:
* Clean-up the bgmac DT binding doc (per Rob Herring)
* Document the lane swap binding and make it generic (Per Andrew Lunn)
Where is the documentation of the lane swap binding?
Changes in v2:
* Remove the PHY power-on (per
Minor comment in line
On 17-04-24 02:50 PM, Eric Anholt wrote:
Cygnus is a small family of SoCs, of which we currently have
devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the
same as 58xx, just requiring a tiny bit of setup that was previously
missing.
Signed-off-by: Eric
On 17-04-24 04:54 PM, Eric Anholt wrote:
Scott Branden <scott.bran...@broadcom.com> writes:
Minor comment in line
On 17-04-24 02:50 PM, Eric Anholt wrote:
Cygnus is a small family of SoCs, of which we currently have
devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly th
Hi Rob,
On 17-06-29 03:40 PM, Rob Herring wrote:
On Tue, Jun 27, 2017 at 12:10 AM, Scott Branden
<scott.bran...@broadcom.com> wrote:
Hi Rob/Florian,
Thanks for input but still don't see any need for SoC specific
compatible stings. IP revision specific yes.
On 17-06-22 06:04 PM, F
Hi Rob,
On 17-06-18 07:04 AM, Rob Herring wrote:
On Mon, Jun 12, 2017 at 01:26:00PM -0700, Arun Parameswaran wrote:
Add device tree binding documentation for the Broadcom DTE
PTP clock driver.
Signed-off-by: Arun Parameswaran
---
On 17-06-21 08:19 PM, Rob Herring wrote:
On Tue, Jun 20, 2017 at 3:48 PM, Scott Branden
<scott.bran...@broadcom.com> wrote:
Hi Rob,
On 17-06-18 07:04 AM, Rob Herring wrote:
On Mon, Jun 12, 2017 at 01:26:00PM -0700, Arun Parameswaran wrote:
Add device tree binding documen
Hi Rob/Florian,
Thanks for input but still don't see any need for SoC specific
compatible stings. IP revision specific yes.
On 17-06-22 06:04 PM, Florian Fainelli wrote:
On 06/22/2017 05:42 PM, Scott Branden wrote:
On 17-06-21 08:19 PM, Rob Herring wrote:
On Tue, Jun 20, 2017 at 3:48 PM
+netdev@vger.kernel.org
On 17-10-18 02:30 PM, Andy Gospodarek wrote:
On Wed, Oct 18, 2017 at 12:31:28PM -0700, Scott Branden wrote:
Hi Andrew,
On 17-10-18 12:16 PM, Andrew Lunn wrote:
Yes, there is also a management processor.
O.K.
Maybe it would be nice to add some more text
+netdev@vger.kernel.org
On 17-10-18 09:01 AM, Scott Branden wrote:
Add ETH_RESET_AP to reset the application processor inside the NIC
interface.
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
include/uapi/linux/ethtool.h | 1 +
1 file changed, 1 insertion(+)
diff
Add ETH_RESET_AP support handling to reset the internal
Application Processor(s) of the SmartNIC card.
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 11 +++
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h |
Add support to reset appplication processors inside SmartNICs by
defining new ETH_RESET_AP bit.
And use new ETH_RESET_AP bit in bnxt ethernet driver.
Scott Branden (2):
net: ethtool: add support for reset of AP inside NIC interface.
bnxt_en: Add ETH_RESET_AP support
drivers/net/ethernet
inside the NIC processor - be it a simple algorithm without
an OS to as complex as hosting multiple VMs.
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
---
include/uapi/linux/ethtool.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/
ags %x
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
ethtool.8.in | 55 -
ethtool.c| 73
2 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/ethtool.8.in
Hi Paul/John,
I see a commit "ethtool: Add DMA Coalescing support" was added to
ethtool-copy.h yet I cannot find the change in the ethtool.h in the
linux kernel.
As such, I am unable to commit a change to ethtool-copy.h to sync it
with net-next. If I sync then ethtool will fail to compile.
Hi Gal,
I do not understand you're comment - questions inline
On 17-12-03 12:07 AM, Gal Pressman wrote:
On 30-Nov-17 21:24, Scott Branden wrote:
Add ETHTOOL_RESET support via --reset command.
ie. ethtool --reset DEVNAME <flagname(s)>
flagnames currently match the ETH_RESET_xxx names
This reverts commit 5dd7bfbc5079cb375876e4e76191263fc28ae1a6.
As Stephen Hemminger mentioned
there is an ABI compatibility issue with this patch:
https://patchwork.ozlabs.org/patch/806049/#1757846
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
ethtool-copy.h | 2 --
eth
:
- update commit message to indicate support for ap
- add symbolic support for parsing of -shared added to each component specified
- cleaned up reset print information to indicate which components have and
have not been reset
Scott Branden (3):
Revert "ethtool: Add DMA Coalescing su
ecific component bitfield directly using
ethtool --reset DEVNAME flags %x
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
ethtool.8.in | 67 ++-
ethtool.c| 113 +++
2 files changed, 17
This covers kernel changes up to:
commit 40e44a1e669d078946f46853808a60d29e6f0885
Author: Scott Branden <scott.bran...@broadcom.com>
Date: Thu Nov 30 11:35:59 2017 -0800
net: ethtool: add support for reset of AP inside NIC interface.
Add ETH_RESET_AP to reset the application pro
Patch series to add ETHTOOL_RESET support to ethtool userspace tool.
Include:
- revert custom change to ethtool-copy.h that is not in linux kernel
- sync ethtool-copy.h with ethtool.h in linux kernel net-next
- add ETHTOOL_RESET support with up to date ethtool.h reset defines
Scott Branden (3
ags %x
Signed-off-by: Scott Branden <scott.bran...@broadcom.com>
---
ethtool.8.in | 58 +-
ethtool.c| 75
2 files changed, 132 insertions(+), 1 deletion(-)
diff --git a/ethtool.8.in
This covers kernel changes up to:
commit 40e44a1e669d078946f46853808a60d29e6f0885
Author: Scott Branden <scott.bran...@broadcom.com>
Date: Thu Nov 30 11:35:59 2017 -0800
net: ethtool: add support for reset of AP inside NIC interface.
Add ETH_RESET_AP to reset the application pro
://patchwork.ozlabs.org/patch/806049/#1757846
Thanks,
Paul
-Original Message-
From: Scott Branden [mailto:scott.bran...@broadcom.com]
Sent: Monday, December 4, 2017 12:07 PM
To: linvi...@tuxdriver.com; Greenwalt, Paul <paul.greenw...@intel.com>
Cc: netdev <netdev@vger.kernel.org>
Subj
Hi Michal,
thanks for review - see comments
On 17-12-05 01:30 PM, Michal Kubecek wrote:
On Tue, Dec 05, 2017 at 12:53:23PM -0800, Scott Branden wrote:
Add ETHTOOL_RESET support via --reset command.
ie. ethtool --reset DEVNAME <flagname(s)>
flagnames currently match the ETH_RESET_xxx
On 17-12-05 12:21 AM, Gal Pressman wrote:
On 04-Dec-17 22:16, Scott Branden wrote:
Hi Gal,
I do not understand you're comment - questions inline
On 17-12-03 12:07 AM, Gal Pressman wrote:
On 30-Nov-17 21:24, Scott Branden wrote:
Add ETHTOOL_RESET support via --reset command.
ie. ethtool
Hi Andrew,
On 17-12-05 02:26 PM, Andrew Lunn wrote:
On Tue, Dec 05, 2017 at 12:53:23PM -0800, Scott Branden wrote:
Add ETHTOOL_RESET support via --reset command.
ie. ethtool --reset DEVNAME <flagname(s)>
flagnames currently match the ETH_RESET_xxx names:
mgmt,irq,dma,filter,offload,m
Hi Michal,
Thanks - one question below hopefully someone can help with.
On 17-12-05 02:29 PM, Michal Kubecek wrote:
On Tue, Dec 05, 2017 at 02:06:09PM -0800, Scott Branden wrote:
On 17-12-05 01:30 PM, Michal Kubecek wrote:
On Tue, Dec 05, 2017 at 12:53:23PM -0800, Scott Branden wrote:
Add
31 matches
Mail list logo