Re: question: tg3 driver/nics and inconsistent RX ring count

[Siva Reddy Kallam]

On Wed, Jul 27, 2016 at 4:25 AM, Michael Chan  wrote:
> On Tue, Jul 26, 2016 at 1:32 PM, Michal Soltys  wrote:
>> On 2016-07-26 22:06, Alexander Duyck wrote:
>>> On Tue, Jul 26, 2016 at 12:52 PM, Michal Soltys  wrote:
 Hi,

 I have a few of BCM5720 and BCM5719 kinds sitting in Dell R320 and R520
 servers - and all of them have certain peculiarity: they claim to have
 up to 4 TX and RX rings (and this can be set/verified just fine through
 ethtool -l/-L, with driver defaulting to 4 rings), indirection table
 (ethtool -x) looks fine as well:

 RX flow hash indirection table for eth1b with 3 RX ring(s):
 0:  0 1 2 3 0 1 2 3
 8:  0 1 2 3 0 1 2 3
 ..

 But this "3 RX ring(s)" is actually a real limit if I try to adjust
 anything, for example all those commands would fail:

 ethtool -X eth1b equal 4
 ethtool -X eth1b weight 1 1 1 1

 But would work fine for 3 and less rings. This was quickly tested with
 different kernel/ethtool combinations, from old 3.16 to 4.6.y with same
 exact results. Nothing fancier (-N/-U) is supported either.

 Any hints/comments about the cause of this and/or possible workarounds ?
>>>
>>> Well a quick look at the driver code makes it seem the problem lies in
>>> tg3_get_rxnfc.  I suspect the bug is related to the following lines:
>>>
>>> /* The first interrupt vector only
>>>  * handles link interrupts.
>>>  */
>>> info->data -= 1;
>>>
>>> I'm not sure what the number of interrupt vectors has to do with the
>>> number of rings.  Perhaps someone more familiar with the driver can
>>> point out why you would subtract 1 from tp->rxq_cnt to get the number
>>> of queues when it seems like it should be tp->rxq_cnt.
>>>
>>> Hope that helps.
>>>
>>> - Alex
>>>
>>
>> Ah thanks, seems to be the case then. Quick git blame shows it's been
>> since the very introduction of RSS indirection configurability (ca.
>> 2011) in this driver, 90415477bf1356f72acc34063ff52441fc10a754.
>>
>> I've CCed the author, maybe he will be able to shed some light.
>
> Matt is no longer working here.  The driver should support up to 5
> MSIX vectors and 4 RSS rings.  It looks like the code to subtract 1 in
> tg3_get_rxnfc() is not correct.  Siva will look further into this.
> Thanks for reporting the issue.
Yes, the code to subtract 1 in tg3_get_rxnfc looks incorrect. we will
upstream the patch for removing this code.

Re: question: tg3 driver/nics and inconsistent RX ring count

[Michael Chan]

On Tue, Jul 26, 2016 at 1:32 PM, Michal Soltys  wrote:
> On 2016-07-26 22:06, Alexander Duyck wrote:
>> On Tue, Jul 26, 2016 at 12:52 PM, Michal Soltys  wrote:
>>> Hi,
>>>
>>> I have a few of BCM5720 and BCM5719 kinds sitting in Dell R320 and R520
>>> servers - and all of them have certain peculiarity: they claim to have
>>> up to 4 TX and RX rings (and this can be set/verified just fine through
>>> ethtool -l/-L, with driver defaulting to 4 rings), indirection table
>>> (ethtool -x) looks fine as well:
>>>
>>> RX flow hash indirection table for eth1b with 3 RX ring(s):
>>> 0:  0 1 2 3 0 1 2 3
>>> 8:  0 1 2 3 0 1 2 3
>>> ..
>>>
>>> But this "3 RX ring(s)" is actually a real limit if I try to adjust
>>> anything, for example all those commands would fail:
>>>
>>> ethtool -X eth1b equal 4
>>> ethtool -X eth1b weight 1 1 1 1
>>>
>>> But would work fine for 3 and less rings. This was quickly tested with
>>> different kernel/ethtool combinations, from old 3.16 to 4.6.y with same
>>> exact results. Nothing fancier (-N/-U) is supported either.
>>>
>>> Any hints/comments about the cause of this and/or possible workarounds ?
>>
>> Well a quick look at the driver code makes it seem the problem lies in
>> tg3_get_rxnfc.  I suspect the bug is related to the following lines:
>>
>> /* The first interrupt vector only
>>  * handles link interrupts.
>>  */
>> info->data -= 1;
>>
>> I'm not sure what the number of interrupt vectors has to do with the
>> number of rings.  Perhaps someone more familiar with the driver can
>> point out why you would subtract 1 from tp->rxq_cnt to get the number
>> of queues when it seems like it should be tp->rxq_cnt.
>>
>> Hope that helps.
>>
>> - Alex
>>
>
> Ah thanks, seems to be the case then. Quick git blame shows it's been
> since the very introduction of RSS indirection configurability (ca.
> 2011) in this driver, 90415477bf1356f72acc34063ff52441fc10a754.
>
> I've CCed the author, maybe he will be able to shed some light.

Matt is no longer working here.  The driver should support up to 5
MSIX vectors and 4 RSS rings.  It looks like the code to subtract 1 in
tg3_get_rxnfc() is not correct.  Siva will look further into this.
Thanks for reporting the issue.

Re: question: tg3 driver/nics and inconsistent RX ring count

[Michal Soltys]

On 2016-07-26 22:06, Alexander Duyck wrote:
> On Tue, Jul 26, 2016 at 12:52 PM, Michal Soltys  wrote:
>> Hi,
>>
>> I have a few of BCM5720 and BCM5719 kinds sitting in Dell R320 and R520
>> servers - and all of them have certain peculiarity: they claim to have
>> up to 4 TX and RX rings (and this can be set/verified just fine through
>> ethtool -l/-L, with driver defaulting to 4 rings), indirection table
>> (ethtool -x) looks fine as well:
>>
>> RX flow hash indirection table for eth1b with 3 RX ring(s):
>> 0:  0 1 2 3 0 1 2 3
>> 8:  0 1 2 3 0 1 2 3
>> ..
>>
>> But this "3 RX ring(s)" is actually a real limit if I try to adjust
>> anything, for example all those commands would fail:
>>
>> ethtool -X eth1b equal 4
>> ethtool -X eth1b weight 1 1 1 1
>>
>> But would work fine for 3 and less rings. This was quickly tested with
>> different kernel/ethtool combinations, from old 3.16 to 4.6.y with same
>> exact results. Nothing fancier (-N/-U) is supported either.
>>
>> Any hints/comments about the cause of this and/or possible workarounds ?
> 
> Well a quick look at the driver code makes it seem the problem lies in
> tg3_get_rxnfc.  I suspect the bug is related to the following lines:
> 
> /* The first interrupt vector only
>  * handles link interrupts.
>  */
> info->data -= 1;
> 
> I'm not sure what the number of interrupt vectors has to do with the
> number of rings.  Perhaps someone more familiar with the driver can
> point out why you would subtract 1 from tp->rxq_cnt to get the number
> of queues when it seems like it should be tp->rxq_cnt.
> 
> Hope that helps.
> 
> - Alex
> 

Ah thanks, seems to be the case then. Quick git blame shows it's been
since the very introduction of RSS indirection configurability (ca.
2011) in this driver, 90415477bf1356f72acc34063ff52441fc10a754.

I've CCed the author, maybe he will be able to shed some light.

Re: question: tg3 driver/nics and inconsistent RX ring count

[Alexander Duyck]

On Tue, Jul 26, 2016 at 12:52 PM, Michal Soltys  wrote:
> Hi,
>
> I have a few of BCM5720 and BCM5719 kinds sitting in Dell R320 and R520
> servers - and all of them have certain peculiarity: they claim to have
> up to 4 TX and RX rings (and this can be set/verified just fine through
> ethtool -l/-L, with driver defaulting to 4 rings), indirection table
> (ethtool -x) looks fine as well:
>
> RX flow hash indirection table for eth1b with 3 RX ring(s):
> 0:  0 1 2 3 0 1 2 3
> 8:  0 1 2 3 0 1 2 3
> ..
>
> But this "3 RX ring(s)" is actually a real limit if I try to adjust
> anything, for example all those commands would fail:
>
> ethtool -X eth1b equal 4
> ethtool -X eth1b weight 1 1 1 1
>
> But would work fine for 3 and less rings. This was quickly tested with
> different kernel/ethtool combinations, from old 3.16 to 4.6.y with same
> exact results. Nothing fancier (-N/-U) is supported either.
>
> Any hints/comments about the cause of this and/or possible workarounds ?

Well a quick look at the driver code makes it seem the problem lies in
tg3_get_rxnfc.  I suspect the bug is related to the following lines:

/* The first interrupt vector only
 * handles link interrupts.
 */
info->data -= 1;

I'm not sure what the number of interrupt vectors has to do with the
number of rings.  Perhaps someone more familiar with the driver can
point out why you would subtract 1 from tp->rxq_cnt to get the number
of queues when it seems like it should be tp->rxq_cnt.

Hope that helps.

- Alex

question: tg3 driver/nics and inconsistent RX ring count

[Michal Soltys]

Hi,

I have a few of BCM5720 and BCM5719 kinds sitting in Dell R320 and R520
servers - and all of them have certain peculiarity: they claim to have
up to 4 TX and RX rings (and this can be set/verified just fine through
ethtool -l/-L, with driver defaulting to 4 rings), indirection table
(ethtool -x) looks fine as well:

RX flow hash indirection table for eth1b with 3 RX ring(s):
0:  0 1 2 3 0 1 2 3
8:  0 1 2 3 0 1 2 3
..

But this "3 RX ring(s)" is actually a real limit if I try to adjust
anything, for example all those commands would fail:

ethtool -X eth1b equal 4
ethtool -X eth1b weight 1 1 1 1

But would work fine for 3 and less rings. This was quickly tested with
different kernel/ethtool combinations, from old 3.16 to 4.6.y with same
exact results. Nothing fancier (-N/-U) is supported either.

Any hints/comments about the cause of this and/or possible workarounds ?