From: Andrew Morton [EMAIL PROTECTED]
- Don't call eisa_driver_unregister() if eisa_driver_register() failed.
- Properly propagate error values.
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/3c509.c | 13 -
1 files changed, 8 insertions(+), 5 deletions(-)
diff
From: Sam Ravnborg [EMAIL PROTECTED]
In latest -mm de620 gave following warning:
WARNING: drivers/net/de620.o - Section mismatch: reference to \
.init.text:de620_probe from .text between 'init_module' (at offset \
0x1682) and 'cleanup_module'
init_module() call de620_probe() which is
From: Pierre Ossman [EMAIL PROTECTED]
Avoids missing interrupts if the interrupt mask gets out of sync.
The reason this patch is needed for me is that the resume function is
broken. It enables interrupts unconditionally, but the interrupt handler
is only registered when the device is up.
I
From: Andrew Morton [EMAIL PROTECTED]
drivers/net/wireless/ipw2200.c: In function `ipw_load':
drivers/net/wireless/ipw2200.c:3224: warning: `ucode_name' might be used
uninitialized in this function
drivers/net/wireless/ipw2200.c:3225: warning: `fw_name' might be used
uninitialized in this
From: Pekka Enberg [EMAIL PROTECTED]
Convert 3c509 driver to use proper suspend/resume API instead of the
deprecated pm_register/pm_unregister.
Signed-off-by: Pekka Enberg [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/3c509.c | 70
From: Thibaut VARENE [EMAIL PROTECTED]
Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001),
which feature a NatSemi DP83840A PHY.
Without that patch, it is impossible to properly initialize the card's PHY,
and it's thus impossible to monitor/configure it.
It's a
From: Stephen Hemminger [EMAIL PROTECTED]
Convert sky2 driver phy semaphore to a mutex.
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/sky2.c | 31 ---
drivers/net/sky2.h |2 +-
2 files
From: Jeff Mahoney [EMAIL PROTECTED]
Move the netif_carrier_off() call from tg3_init_one()-
tg3_init_link_config() to tg3_open() as is the convention for most other
network drivers.
I was getting a panic after a tg3 device failed to initialize due to DMA
failure. The oops pointed to the link
From: Denis Vlasenko [EMAIL PROTECTED]
Fixes stuck carrier off condition when ethernet line speed/duplex
autonegotiation is turned off before cable is plugged in.
Signed-off-by: Denis Vlasenko [EMAIL PROTECTED]
Cc: Jeff Garzik [EMAIL PROTECTED]
Cc: Lee Revell [EMAIL PROTECTED]
Cc: Roger Luethi
From: Adrian Bunk [EMAIL PROTECTED]
This patch moves prototypes of global variables and functions to a header
file.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
Acked-by: John Ronciak [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/e1000/e1000.h | 22
From: Adrian Bunk [EMAIL PROTECTED]
This patch contains the following possible updates:
- let FORCEDETH no longer depend on EXPERIMENTAL
- remove the Reverse Engineered from the option text:
for the user it's important which hardware the driver supports, not
how it was developed
From: Arjan van de Ven [EMAIL PROTECTED]
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven [EMAIL PROTECTED]
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
Cc: David S. Miller
From: Andrew Morton [EMAIL PROTECTED]
MODULE_PARM() is deprecated and is about to go away altogether.
Cc: David S. Miller [EMAIL PROTECTED]
Cc: Rusty Russell [EMAIL PROTECTED]
Cc: David Basden [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/irda/toim3232-sir.c
From: Ingo Molnar [EMAIL PROTECTED]
Semaphore to mutexes conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
Cc: Ronald Bultje [EMAIL PROTECTED]
Cc: David S. Miller [EMAIL PROTECTED]
From: Shaun Pereira [EMAIL PROTECTED]
Fixes the following error from kernel
T2 kernel: schedule_timeout:
wrong timeout value from 88164796
Signed-off-by: Shaun Pereira [EMAIL PROTECTED]
Acked-by: Arnd Bergmann [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL
From: Arjan van de Ven [EMAIL PROTECTED]
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven [EMAIL PROTECTED]
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
Cc: David S. Miller
From: Ingo Molnar [EMAIL PROTECTED]
Semaphore to mutexes conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
Cc: Ronald Bultje [EMAIL PROTECTED]
Cc: David S. Miller [EMAIL PROTECTED]
From: Shaun Pereira [EMAIL PROTECTED]
Since the register_ioctl32_conversion() patch in the kernel is now obsolete,
provide another method to allow 32 bit user space ioctls to reach the kernel.
Signed-off-by: Shaun Pereira [EMAIL PROTECTED]
Acked-by: Arnd Bergmann [EMAIL PROTECTED]
From: Alexey Dobriyan [EMAIL PROTECTED]
Signed-off-by: Alexey Dobriyan [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/atm/suni.c |2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -puN drivers/atm/suni.c~suni-cast-arg-properly-in-sonet_setframing
From: Jiri Slaby [EMAIL PROTECTED]
Pci probing functions added, some functions were rewritten. Use PCI_DEVICE
macro.
Signed-off-by: Jiri Slaby [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
drivers/net/sunhme.c | 79 -
1 files
From: Ingo Molnar [EMAIL PROTECTED]
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
(akpm: something went wrong with this patch. Might need redoing)
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
Cc:
From: Shaun Pereira [EMAIL PROTECTED]
Allows use of the optional user facility to insert ITU-T
(http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25
packets. This feature is optional; no facilities will be added if the ioctl
is not used, and call setup packet remains the same
From: Shaun Pereira [EMAIL PROTECTED]
To allow 32 bit x25 module structures to be passed to a 64 bit kernel via
ioctl using the new compat_sock_ioctl registration mechanism instead of the
obsolete 'register_ioctl32_conversion into hash table' mechanism
Signed-off-by: Shaun Pereira [EMAIL
Eric Dumazet a écrit :
8011db70 pfn_to_page: /* pfn_to_page total: 487244 0.8036 */
18501 0.0305 :8011db70: mov2965994(%rip),%ecx
# memnode_shift
83312 0.1374 :8011db76: mov%rdi,%rax
2 3.3e-06 :8011db79: push %rbp
[EMAIL PROTECTED] wrote:
From: Pierre Ossman [EMAIL PROTECTED]
Avoids missing interrupts if the interrupt mask gets out of sync.
The reason this patch is needed for me is that the resume function is
broken. It enables interrupts unconditionally, but the interrupt handler
is only
On Wednesday 08 March 2006 03:38, Benjamin LaHaise wrote:
It's hardly that uncommon for pages to cross cachelines or for pages to
move around CPUs with networking.
Data?
Please name some sort of benchmarks that show your concerns for decreased
performance.
Anything that manipulates lots
On Wednesday 08 March 2006 10:09, Eric Dumazet wrote:
I suggest the following change (seems better than playing vmlinux.lds
games)
include/asm-x86_64/mmzone.h
struct memnode {
int shift;
u8 map[NODEMAPSIZE];
} cacheline_aligned;
extern struct memnode memnode;
#define
Hi Dave,
Here is a set of patches for net-2.6.17.
Please pull from:
git://tipc.cslab.ericsson.net/pub/git/tipc.git
Thanks
/Per
net/tipc/bcast.c | 58 +++
net/tipc/bearer.c | 20 +--
net/tipc/cluster.c | 20 +--
From: Per Liden [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 11:18:15 +0100 (CET)
Here is a set of patches for net-2.6.17.
Please pull from:
git://tipc.cslab.ericsson.net/pub/git/tipc.git
Looks good, but I can't pull it cleanly.
Please fix this up, thanks.
[EMAIL
Andi Kleen a écrit :
Can you send tested patches with proper descriptions and signed off lines
please?
-Andi
You are welcome Andi :)
[PATCH] x86_64 : group memnodemap and memnodeshift in a memnode structure
pfn_to_page() and others need to access both memnode_shift and the very first
On Tue, Mar 07, 2006 at 03:03:13PM -0800, David S. Miller ([EMAIL PROTECTED])
wrote:
From: Evgeniy Polyakov [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 00:51:33 +0300
RCU introduces noticeble latencies for writing part compared to
rwlock, so workloads when a lot of new short connections are
This patch makes the needlessly global function ipw_qos_current_mode()
static.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
---
This patch was already sent on:
- 4 Mar 2006
--- linux-2.6.16-rc5-mm2-full/drivers/net/wireless/ipw2200.c.old
2006-03-03 17:49:37.0 +0100
+++
On Wed, 8 Mar 2006 12:26:48 +0800, Zhu Yi wrote:
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
[...]
-#define IPW2100_VERSION git-1.1.4
+#define IPW2100_VERSION git-1.2.2
From [PATCH 1/6] ipw2x00: expend Copyright to 2006:
---
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] napsal(a):
From: Jiri Slaby [EMAIL PROTECTED]
Pci probing functions added, some functions were rewritten. Use PCI_DEVICE
macro.
Signed-off-by: Jiri Slaby [EMAIL PROTECTED]
Signed-off-by: Andrew Morton [EMAIL PROTECTED]
---
On Wed, Mar 08, 2006 at 12:25:13PM +0800, Zhu Yi wrote:
From: Ingo Molnar [EMAIL PROTECTED]
Date: Tue, 28 Feb 2006 07:20:54 + (+0800)
[PATCH 4/6] ipw2100: semaphore to mutexes conversion
semaphore to mutexes conversion.
the conversion was generated via scripts, and the result was
On Wed, Mar 08, 2006 at 12:26:48PM +0800, Zhu Yi wrote:
From: Zhu Yi [EMAIL PROTECTED]
Date: Tue, 21 Feb 2006 18:46:15 + (+0800)
[PATCH 6/6] ipw2100: Update version ipw2100 stamp to 1.2.2
---
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -167,7
On Wed, Mar 08, 2006 at 01:34:31PM +0800, Zhu Yi wrote:
From: James Ketrenos [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 03:22:28 + (+0800)
[PATCH 15/16] ipw2200: switch to the new ipw2200-fw-3.0 image format
This patch modifies the driver to support the ipw2200-fw-3.0 image format.
Quoting r. David S. Miller [EMAIL PROTECTED]:
Subject: Re: Re: TSO and IPoIB performance degradation
From: Roland Dreier [EMAIL PROTECTED]
Date: Tue, 07 Mar 2006 17:17:30 -0800
The reason TSO comes up is that reverting the patch described below
helps (or helped at some point at least)
Christoph Hellwig wrote:
On Wed, Mar 08, 2006 at 12:26:48PM +0800, Zhu Yi wrote:
-#define IPW2100_VERSION git-1.1.4
+#define IPW2100_VERSION git-1.2.2
git-foo is a pretty stupid version number, please kill the git- prefix.
Perhaps for you...
For us this prefix has been very
Christoph Hellwig wrote:
On Wed, Mar 08, 2006 at 01:34:31PM +0800, Zhu Yi wrote:
From: James Ketrenos [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 03:22:28 + (+0800)
[PATCH 15/16] ipw2200: switch to the new ipw2200-fw-3.0 image format
This patch modifies the driver to support the
On Wed, 8 Mar 2006, David S. Miller wrote:
From: Per Liden [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 11:18:15 +0100 (CET)
Here is a set of patches for net-2.6.17.
Please pull from:
git://tipc.cslab.ericsson.net/pub/git/tipc.git
Looks good, but I can't pull it cleanly.
Ok,
On Wednesday 08 March 2006 17:07, Benjamin LaHaise wrote:
You haven't come up with any data to support your position,
You're proposing to waste 0.1% of the memory of the system
with a quite dubious optimization.
Unless you're showing real gains on some macro benchmark I won't
accept that
On Wed, Mar 08, 2006 at 02:01:04PM +0300, Evgeniy Polyakov wrote:
When I tested RCU for similar change for kevent, but postponed more work
to RCU callback, including socket closing and some attempts to inode
dereferencing, such change forced performance degradation for httperf
benchmark and
On Tue, Mar 07, 2006 at 07:11:27PM -0800, Simon Barber wrote:
Overloading configuration parameters with extra meanings like this makes
it harder to configure the system - I think it's useful to keep an
on/off function separate from the power setting.
Simon
The main issue I have
On Wed, Mar 08, 2006 at 12:26:56PM -0800, Ravikiran G Thirumalai wrote:
+static inline void percpu_counter_mod_bh(struct percpu_counter *fbc, long
amount)
+{
+ local_bh_disable();
+ fbc-count += amount;
+ local_bh_enable();
+}
Please use local_t instead, then you don't have to
On Tue, Mar 07, 2006 at 06:16:02PM -0800, Andrew Morton wrote:
Ravikiran G Thirumalai [EMAIL PROTECTED] wrote:
+static inline int read_sockets_allocated(struct proto *prot)
+{
+ int total = 0;
+ int cpu;
+ for_each_cpu(cpu)
+ total +=
On Tue, Mar 07, 2006 at 07:22:34PM -0800, Andrew Morton wrote:
Ravikiran G Thirumalai [EMAIL PROTECTED] wrote:
The problem is percpu_counter_sum has to read all the cpus cachelines. If
we have to use percpu_counter_sum everywhere, then might as well use plain
per-cpu counters instead of
Pierre Ossman [EMAIL PROTECTED] :
[...]
This was fixed properly by Francois Romieu, so please merge those instead:
http://bugzilla.kernel.org/show_bug.cgi?id=5681
The patch has already been merged in mainline.
--
Ueimor
-
To unsubscribe from this list: send the line unsubscribe netdev in
jamal wrote:
On Mon, 2006-06-03 at 12:00 -0500, Shailabh Nagar wrote:
My design was to have the listener get both responses (what I call
replies in the code) as well as events (data sent on exit of pid)
I think i may not be doing justice explaining this, so let me be more
From: Michael S. Tsirkin [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 14:53:11 +0200
What I was trying to figure out was, how can we re-enable the trick without
hurting TSO? Could a solution be to simply look at the frame size, and call
tcp_send_delayed_ack if the frame size is small?
The problem
On Wed, Mar 08, 2006 at 04:17:33PM -0500, Benjamin LaHaise wrote:
On Wed, Mar 08, 2006 at 01:07:26PM -0800, Ravikiran G Thirumalai wrote:
Last time I checked, all the major architectures had efficient local_t
implementations. Most of the RISC CPUs are able to do a load / store
conditional
Stephen Hemminger [EMAIL PROTECTED] :
[...]
Then stop at #6.
#1..#6 applied to branch 'for-jeff' at
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6.git
Shortlog
Francois Romieu:
de2104x: prevent interrupt before the interrupt handler is registered
de2104x: fix the
Geert Uytterhoeven [EMAIL PROTECTED] :
On Tue, 7 Mar 2006, Ralf Baechle wrote:
[...]
I'm just not convinced of having such a workaround as a build option.
The average person building a a kernel will probably not know if the
option needs to be enabled or not.
Indeed, if it's mentioned in
On Wed, Mar 08, 2006 at 02:25:28PM -0800, Ravikiran G Thirumalai wrote:
Then, for the batched percpu_counters, we could gain by using local_t only
for
the UP case. But we will have to have a new local_long_t implementation
for that. Do you think just one use case of local_long_t warrants
Please take the three patches yesterday for 2.6.16,
The others can wait.
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Stephen Hemminger [EMAIL PROTECTED] :
Please take the three patches yesterday for 2.6.16,
The others can wait.
So instead of #1..#6 from 07/03/2006, #1..#3 from 08/03/2003
which actually cover (with minor differences) #4..#6 from 07/03/2006
should be pushed ?
--
Ueimor -- going to bed
-
To
Ravikiran G Thirumalai [EMAIL PROTECTED] wrote:
On Wed, Mar 08, 2006 at 04:17:33PM -0500, Benjamin LaHaise wrote:
On Wed, Mar 08, 2006 at 01:07:26PM -0800, Ravikiran G Thirumalai wrote:
Last time I checked, all the major architectures had efficient local_t
implementations. Most of the
Andrew Morton [EMAIL PROTECTED] wrote:
Once decrapify-asm-generic-localh.patch is merged I think all architectures
can and should use asm-generic/local.h.
err, no. Because that's just atomic_long_t, and that's a locked instruction.
We need to review and fix up those architectures which have
Benjamin LaHaise [EMAIL PROTECTED] wrote:
On Wed, Mar 08, 2006 at 02:25:28PM -0800, Ravikiran G Thirumalai wrote:
Then, for the batched percpu_counters, we could gain by using local_t only
for
the UP case. But we will have to have a new local_long_t implementation
for that. Do you
On Mon, Feb 27, 2006 at 11:45:51AM +0100, Seewer Philippe wrote:
OK, found it.
The code in pcnet32_open assigns XCVR_INTERNAL to ecmd.port instead of
ecmd.transceiver, making mii_ethtool_sset fail and leaving all phys
configured to defaults.
On the Allied Telesyn FTX cards this means to
Catherine Zhang [EMAIL PROTECTED] wrote:
From: [EMAIL PROTECTED]
This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security association its TCP or UDP sockets are currently connected to
via getsockopt and the
From: Herbert Xu [EMAIL PROTECTED]
Date: Thu, 09 Mar 2006 11:33:19 +1100
Catherine Zhang [EMAIL PROTECTED] wrote:
From: [EMAIL PROTECTED]
This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security
Ravikiran G Thirumalai [EMAIL PROTECTED] wrote:
On Wed, Mar 08, 2006 at 03:43:21PM -0800, Andrew Morton wrote:
Benjamin LaHaise [EMAIL PROTECTED] wrote:
I think it may make more sense to simply convert local_t into a long,
given
that most of the users will be things like stats
From: Randy.Dunlap [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 09:16:08 -0800
From: Randy Dunlap [EMAIL PROTECTED]
A recent change to compat. dev_ifconf() in fs/compat_ioctl.c
causes ifconf data to be truncated 1 entry too early when copying it
to userspace. The correct amount of data (length)
The series only contains one patch. Sorry for the cover email, I was trying to
edit the patch email and did not intend to create cover email. The one patch
in this series is a fix for mii-tool. This patch was created using Jeff
Garzik's latest 'upstream' branch.
Jeff,
This patch is
Paul Rolland reported that e1000 was having a hard time using mii-tool to set
speed and duplex. This patch fixes the issue on both newer hardware as well as
fixing the code issue that originally caused the problem.
Signed-off-by: Jesse Brandeburg [EMAIL PROTECTED]
Signed-off-by: Jeff Kirsher
On Wed, 08 Mar 2006 16:46:27 -0800 (PST) David S. Miller wrote:
From: Randy.Dunlap [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 09:16:08 -0800
From: Randy Dunlap [EMAIL PROTECTED]
A recent change to compat. dev_ifconf() in fs/compat_ioctl.c
causes ifconf data to be truncated 1 entry too
From: Randy.Dunlap [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 17:41:16 -0800
On Wed, 08 Mar 2006 16:46:27 -0800 (PST) David S. Miller wrote:
Is this one relevant for -stable?
Yes, IMO. Have to wait for it to be merged upstream, right?
I'll take care of everything, thanks Randy.
-
To
Andrew Morton [EMAIL PROTECTED] writes:
x86_64 is signed 32-bit!
I'll change it. You want signed 64bit?
-Andi
-
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Andi Kleen [EMAIL PROTECTED] wrote:
Andrew Morton [EMAIL PROTECTED] writes:
x86_64 is signed 32-bit!
I'll change it. You want signed 64bit?
Well it's all random at present. Since the API is defined as unsigned I
guess it's be best to make it unsigned for now. Later, when someone
Hi, James,
I am working on a separate patch for Unix datagram, instead of mixing the
two into one patch.
thanks,
Catherine
James Morris [EMAIL PROTECTED] wrote on 03/08/2006 09:56:33 PM:
On Wed, 8 Mar 2006, David S. Miller wrote:
I thought James still had some objections?
James?
Is
This patch was diff'd against the latest 'upstream' branch from Garzik's tree.
This patch can be pulled from the following location:
git://198.78.49.142/linux-2.6.git e100-upstream
Jeff - should a patch be made for 2.6.16 also?
Olaf Hering reported a problem on pseries with e100 where ethtool
On Wed, 2006-03-08 at 13:23 +0100, Jiri Benc wrote:
On Wed, 8 Mar 2006 13:34:10 +0800, Zhu Yi wrote:
+3.2 iwconfig sens
+---
+
+The 'iwconfig ethX sens XX' command will not set the signal sensitivity
+threshold, as described in iwconfig
We're leaking an skb in a failure path in this function.
Coverity #632
Signed-off-by: Dave Jones [EMAIL PROTECTED]
--- linux-2.6/drivers/net/tun.c~2006-03-08 22:43:54.0 -0500
+++ linux-2.6/drivers/net/tun.c 2006-03-08 22:46:16.0 -0500
@@ -249,8 +249,11 @@ static
From: Per Liden [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 17:05:08 +0100 (CET)
On Wed, 8 Mar 2006, David S. Miller wrote:
From: Per Liden [EMAIL PROTECTED]
Date: Wed, 8 Mar 2006 11:18:15 +0100 (CET)
Here is a set of patches for net-2.6.17.
Please pull from:
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Mon, 6 Feb 2006 14:39:18 -0800
This applies after the RCU fix patches; it can be held until 2.6.17.
Run br_netfilter through Lindent to fix whitespace.
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
This patch set doesn't apply cleanly,
I am not sure if it is the same problem, but I am now able to reproduce
slowness
if I use eclipse and debug something. It is annoying, but not fatal.
If I turn off TCP appropriate byte count:
sudo sysctl -w net.ipv4.tcp_abc=0
then the problem goes away. See RFC 3465
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Wed, 08 Mar 2006 23:24:22 -0800
I have gotten massive strace's and the java VM is:
1) Turning on TCP_NODELAY
2) Sending small packets.
Java is doing the wrong thing, obviously.
4) Fix java
And this is the only reasonable recourse.
78 matches
Mail list logo
