Re: [PATCH 08/10] mtd: flash-sam: Bindings for Juniper's SAM FPGA flash

2016-10-17 Thread Pantelis Antoniou
Hi Rob,

> On Oct 10, 2016, at 23:07 , Rob Herring  wrote:
> 
> gOn Fri, Oct 07, 2016 at 06:18:36PM +0300, Pantelis Antoniou wrote:
>> From: Georgi Vlaev 
>> 
>> Add binding document for Junipers Flash IP block present
>> in the SAM FPGA on PTX series of routers.
>> 
>> Signed-off-by: Georgi Vlaev 
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou 
>> ---
>> .../devicetree/bindings/mtd/flash-sam.txt  | 31 
>> ++
>> 1 file changed, 31 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mtd/flash-sam.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/mtd/flash-sam.txt 
>> b/Documentation/devicetree/bindings/mtd/flash-sam.txt
>> new file mode 100644
>> index 000..bdf1d78
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/flash-sam.txt
>> @@ -0,0 +1,31 @@
>> +Flash device on a Juniper SAM FPGA
>> +
>> +These flash chips are found in the PTX series of Juniper routers.
>> +
>> +They are regular CFI compatible (Intel or AMD extended) flash chips with
>> +some special write protect/VPP bits that can be controlled by the machine's
>> +system controller.
> 
> And where's the description of the sys ctrlr?
> 

The system controller is Juniper IP. We’ll have to ask around about
specifics, and it’s pretty uninspiring stuff.

>> +
>> +Required properties:
>> +- compatible : must be "jnx,flash-sam"
>> +
>> +Optional properties:
>> +- reg : memory address for the flash chip, note that this is not
>> +required since usually the device is a subdevice of the SAM MFD
>> +driver which fills in the register fields.
>> +
>> +For the rest of the properties, see mtd-physmap.txt.
>> +
>> +The device tree may optionally contain sub-nodes describing partitions of 
>> the
>> +address space. See partition.txt for more detail.
>> +
>> +Example:
>> +
>> +flash_sam {
>> +compatible = "jnx,flash-sam";
>> +partition@0 {
> 
> This should have a heirarchy of a controller node, a flash child node, 
> partitions child node, and partition child nodes.
> 

OK.

>> +reg = <0x0 0x40>;
>> +label = "pic0-golden";
>> +read-only;
>> +};
>> +};
>> -- 
>> 1.9.1



Re: [PATCH 08/10] mtd: flash-sam: Bindings for Juniper's SAM FPGA flash

2016-10-10 Thread Rob Herring
gOn Fri, Oct 07, 2016 at 06:18:36PM +0300, Pantelis Antoniou wrote:
> From: Georgi Vlaev 
> 
> Add binding document for Junipers Flash IP block present
> in the SAM FPGA on PTX series of routers.
> 
> Signed-off-by: Georgi Vlaev 
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou 
> ---
>  .../devicetree/bindings/mtd/flash-sam.txt  | 31 
> ++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/flash-sam.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/flash-sam.txt 
> b/Documentation/devicetree/bindings/mtd/flash-sam.txt
> new file mode 100644
> index 000..bdf1d78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/flash-sam.txt
> @@ -0,0 +1,31 @@
> +Flash device on a Juniper SAM FPGA
> +
> +These flash chips are found in the PTX series of Juniper routers.
> +
> +They are regular CFI compatible (Intel or AMD extended) flash chips with
> +some special write protect/VPP bits that can be controlled by the machine's
> +system controller.

And where's the description of the sys ctrlr?

> +
> +Required properties:
> +- compatible : must be "jnx,flash-sam"
> +
> +Optional properties:
> +- reg : memory address for the flash chip, note that this is not
> +required since usually the device is a subdevice of the SAM MFD
> +driver which fills in the register fields.
> +
> +For the rest of the properties, see mtd-physmap.txt.
> +
> +The device tree may optionally contain sub-nodes describing partitions of the
> +address space. See partition.txt for more detail.
> +
> +Example:
> +
> +flash_sam {
> + compatible = "jnx,flash-sam";
> + partition@0 {

This should have a heirarchy of a controller node, a flash child node, 
partitions child node, and partition child nodes.

> + reg = <0x0 0x40>;
> + label = "pic0-golden";
> + read-only;
> + };
> +};
> -- 
> 1.9.1
>