Re: [RFC 2/9] net: dsa: add basic support for VLAN operations
On 06/01/2015 06:27 PM, Vivien Didelot wrote: This patch adds the glue between DSA and switchdev to add and delete SWITCHDEV_OBJ_PORT_VLAN objects. This will allow the DSA switch drivers implementing the port_vlan_add and port_vlan_del functions to access the switch VLAN database through userspace commands such as bridge vlan. Signed-off-by: Vivien Didelot vivien.dide...@savoirfairelinux.com --- include/net/dsa.h | 7 +++ net/dsa/slave.c | 61 +-- 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/include/net/dsa.h b/include/net/dsa.h index fbca63b..726357b 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -302,6 +302,13 @@ struct dsa_switch_driver { const unsigned char *addr, u16 vid); int (*fdb_getnext)(struct dsa_switch *ds, int port, unsigned char *addr, bool *is_static); + + /* +* VLAN support +*/ + int (*port_vlan_add)(struct dsa_switch *ds, int port, u16 vid, +u16 bridge_flags); + int (*port_vlan_del)(struct dsa_switch *ds, int port, u16 vid); }; void register_switch_driver(struct dsa_switch_driver *type); diff --git a/net/dsa/slave.c b/net/dsa/slave.c index cbda00a..52ba5a1 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -363,6 +363,25 @@ static int dsa_slave_port_attr_set(struct net_device *dev, return ret; } +static int dsa_slave_port_vlans_add(struct net_device *dev, + struct switchdev_obj_vlan *vlan) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p-parent; + int vid, err = 0; + + if (!ds-drv-port_vlan_add) + return -ENOTSUPP; + + for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { + err = ds-drv-port_vlan_add(ds, p-port, vid, vlan-flags); + if (err) + break; + } + + return err; +} + static int dsa_slave_port_obj_add(struct net_device *dev, struct switchdev_obj *obj) { @@ -378,6 +397,9 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return 0; switch (obj-id) { + case SWITCHDEV_OBJ_PORT_VLAN: + err = dsa_slave_port_vlans_add(dev, obj-u.vlan); + break; default: err = -ENOTSUPP; break; @@ -386,12 +408,34 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return err; } +static int dsa_slave_port_vlans_del(struct net_device *dev, + struct switchdev_obj_vlan *vlan) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p-parent; + int vid, err = 0; + + if (!ds-drv-port_vlan_del) + return -ENOTSUPP; + + for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { + err = ds-drv-port_vlan_del(ds, p-port, vid); + if (err) + break; + } + + return err; +} + static int dsa_slave_port_obj_del(struct net_device *dev, struct switchdev_obj *obj) { int err; switch (obj-id) { + case SWITCHDEV_OBJ_PORT_VLAN: + err = dsa_slave_port_vlans_del(dev, obj-u.vlan); + break; default: err = -EOPNOTSUPP; break; @@ -473,6 +517,15 @@ static netdev_tx_t dsa_slave_notag_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } +static int dsa_slave_vlan_noop(struct net_device *dev, __be16 proto, u16 vid) +{ + /* NETIF_F_HW_VLAN_CTAG_FILTER requires ndo_vlan_rx_add_vid and +* ndo_vlan_rx_kill_vid, otherwise the VLAN acceleration is considered +* buggy (see net/core/dev.c). +*/ As Scott mentioned, just don't set NETIF_F_HW_VLAN_CTAG_FILTER. I don't entirely understand why we would not want to filter VLANs in the switch. Can you explain ? Thanks, Guenter -- To unsubscribe from this list: send the line unsubscribe netdev in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC 2/9] net: dsa: add basic support for VLAN operations
Hi Guenter, On Jun 2, 2015, at 10:42 AM, Guenter Roeck li...@roeck-us.net wrote: On 06/01/2015 06:27 PM, Vivien Didelot wrote: This patch adds the glue between DSA and switchdev to add and delete SWITCHDEV_OBJ_PORT_VLAN objects. This will allow the DSA switch drivers implementing the port_vlan_add and port_vlan_del functions to access the switch VLAN database through userspace commands such as bridge vlan. Signed-off-by: Vivien Didelot vivien.dide...@savoirfairelinux.com --- include/net/dsa.h | 7 +++ net/dsa/slave.c | 61 +-- 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/include/net/dsa.h b/include/net/dsa.h index fbca63b..726357b 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -302,6 +302,13 @@ struct dsa_switch_driver { const unsigned char *addr, u16 vid); int (*fdb_getnext)(struct dsa_switch *ds, int port, unsigned char *addr, bool *is_static); + +/* + * VLAN support + */ +int (*port_vlan_add)(struct dsa_switch *ds, int port, u16 vid, + u16 bridge_flags); +int (*port_vlan_del)(struct dsa_switch *ds, int port, u16 vid); }; void register_switch_driver(struct dsa_switch_driver *type); diff --git a/net/dsa/slave.c b/net/dsa/slave.c index cbda00a..52ba5a1 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -363,6 +363,25 @@ static int dsa_slave_port_attr_set(struct net_device *dev, return ret; } +static int dsa_slave_port_vlans_add(struct net_device *dev, +struct switchdev_obj_vlan *vlan) +{ +struct dsa_slave_priv *p = netdev_priv(dev); +struct dsa_switch *ds = p-parent; +int vid, err = 0; + +if (!ds-drv-port_vlan_add) +return -ENOTSUPP; + +for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { +err = ds-drv-port_vlan_add(ds, p-port, vid, vlan-flags); +if (err) +break; +} + +return err; +} + static int dsa_slave_port_obj_add(struct net_device *dev, struct switchdev_obj *obj) { @@ -378,6 +397,9 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return 0; switch (obj-id) { +case SWITCHDEV_OBJ_PORT_VLAN: +err = dsa_slave_port_vlans_add(dev, obj-u.vlan); +break; default: err = -ENOTSUPP; break; @@ -386,12 +408,34 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return err; } +static int dsa_slave_port_vlans_del(struct net_device *dev, +struct switchdev_obj_vlan *vlan) +{ +struct dsa_slave_priv *p = netdev_priv(dev); +struct dsa_switch *ds = p-parent; +int vid, err = 0; + +if (!ds-drv-port_vlan_del) +return -ENOTSUPP; + +for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { +err = ds-drv-port_vlan_del(ds, p-port, vid); +if (err) +break; +} + +return err; +} + static int dsa_slave_port_obj_del(struct net_device *dev, struct switchdev_obj *obj) { int err; switch (obj-id) { +case SWITCHDEV_OBJ_PORT_VLAN: +err = dsa_slave_port_vlans_del(dev, obj-u.vlan); +break; default: err = -EOPNOTSUPP; break; @@ -473,6 +517,15 @@ static netdev_tx_t dsa_slave_notag_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } +static int dsa_slave_vlan_noop(struct net_device *dev, __be16 proto, u16 vid) +{ +/* NETIF_F_HW_VLAN_CTAG_FILTER requires ndo_vlan_rx_add_vid and + * ndo_vlan_rx_kill_vid, otherwise the VLAN acceleration is considered + * buggy (see net/core/dev.c). + */ +return 0; +} + /* ethtool operations ***/ static int @@ -734,6 +787,10 @@ static const struct net_device_ops dsa_slave_netdev_ops = { .ndo_fdb_dump = dsa_slave_fdb_dump, .ndo_do_ioctl = dsa_slave_ioctl, .ndo_get_iflink = dsa_slave_get_iflink, +.ndo_vlan_rx_add_vid= dsa_slave_vlan_noop, +.ndo_vlan_rx_kill_vid = dsa_slave_vlan_noop, +.ndo_bridge_setlink = switchdev_port_bridge_setlink, +.ndo_bridge_dellink = switchdev_port_bridge_dellink, }; static const struct switchdev_ops dsa_slave_switchdev_ops = { @@ -924,7 +981,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent, if (slave_dev == NULL) return -ENOMEM; -slave_dev-features = master-vlan_features; +slave_dev-features = master-vlan_features | NETIF_F_VLAN_FEATURES; Hi Vivien, NETIF_F_VLAN_FEATURES declares that the device supports receive and transmit tagging offload. We do this on transmit, by calling vlan_hwaccel_push_inside() with patch 9, but not on the receive side. I think you may need to add matching code on the receive side to remove the VLAN
Re: [RFC 2/9] net: dsa: add basic support for VLAN operations
On 06/01/2015 06:27 PM, Vivien Didelot wrote: This patch adds the glue between DSA and switchdev to add and delete SWITCHDEV_OBJ_PORT_VLAN objects. This will allow the DSA switch drivers implementing the port_vlan_add and port_vlan_del functions to access the switch VLAN database through userspace commands such as bridge vlan. Signed-off-by: Vivien Didelot vivien.dide...@savoirfairelinux.com --- include/net/dsa.h | 7 +++ net/dsa/slave.c | 61 +-- 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/include/net/dsa.h b/include/net/dsa.h index fbca63b..726357b 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -302,6 +302,13 @@ struct dsa_switch_driver { const unsigned char *addr, u16 vid); int (*fdb_getnext)(struct dsa_switch *ds, int port, unsigned char *addr, bool *is_static); + + /* +* VLAN support +*/ + int (*port_vlan_add)(struct dsa_switch *ds, int port, u16 vid, +u16 bridge_flags); + int (*port_vlan_del)(struct dsa_switch *ds, int port, u16 vid); }; void register_switch_driver(struct dsa_switch_driver *type); diff --git a/net/dsa/slave.c b/net/dsa/slave.c index cbda00a..52ba5a1 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -363,6 +363,25 @@ static int dsa_slave_port_attr_set(struct net_device *dev, return ret; } +static int dsa_slave_port_vlans_add(struct net_device *dev, + struct switchdev_obj_vlan *vlan) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p-parent; + int vid, err = 0; + + if (!ds-drv-port_vlan_add) + return -ENOTSUPP; + + for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { + err = ds-drv-port_vlan_add(ds, p-port, vid, vlan-flags); + if (err) + break; + } + + return err; +} + static int dsa_slave_port_obj_add(struct net_device *dev, struct switchdev_obj *obj) { @@ -378,6 +397,9 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return 0; switch (obj-id) { + case SWITCHDEV_OBJ_PORT_VLAN: + err = dsa_slave_port_vlans_add(dev, obj-u.vlan); + break; default: err = -ENOTSUPP; break; @@ -386,12 +408,34 @@ static int dsa_slave_port_obj_add(struct net_device *dev, return err; } +static int dsa_slave_port_vlans_del(struct net_device *dev, + struct switchdev_obj_vlan *vlan) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p-parent; + int vid, err = 0; + + if (!ds-drv-port_vlan_del) + return -ENOTSUPP; + + for (vid = vlan-vid_start; vid = vlan-vid_end; ++vid) { + err = ds-drv-port_vlan_del(ds, p-port, vid); + if (err) + break; + } + + return err; +} + static int dsa_slave_port_obj_del(struct net_device *dev, struct switchdev_obj *obj) { int err; switch (obj-id) { + case SWITCHDEV_OBJ_PORT_VLAN: + err = dsa_slave_port_vlans_del(dev, obj-u.vlan); + break; default: err = -EOPNOTSUPP; break; @@ -473,6 +517,15 @@ static netdev_tx_t dsa_slave_notag_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } +static int dsa_slave_vlan_noop(struct net_device *dev, __be16 proto, u16 vid) +{ + /* NETIF_F_HW_VLAN_CTAG_FILTER requires ndo_vlan_rx_add_vid and +* ndo_vlan_rx_kill_vid, otherwise the VLAN acceleration is considered +* buggy (see net/core/dev.c). +*/ + return 0; +} + /* ethtool operations ***/ static int @@ -734,6 +787,10 @@ static const struct net_device_ops dsa_slave_netdev_ops = { .ndo_fdb_dump = dsa_slave_fdb_dump, .ndo_do_ioctl = dsa_slave_ioctl, .ndo_get_iflink = dsa_slave_get_iflink, + .ndo_vlan_rx_add_vid= dsa_slave_vlan_noop, + .ndo_vlan_rx_kill_vid = dsa_slave_vlan_noop, + .ndo_bridge_setlink = switchdev_port_bridge_setlink, + .ndo_bridge_dellink = switchdev_port_bridge_dellink, }; static const struct switchdev_ops dsa_slave_switchdev_ops = { @@ -924,7 +981,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent, if (slave_dev == NULL) return -ENOMEM; - slave_dev-features = master-vlan_features; + slave_dev-features = master-vlan_features | NETIF_F_VLAN_FEATURES; Hi Vivien, NETIF_F_VLAN_FEATURES declares that the device supports receive and transmit tagging offload. We do this on