Dan,
Just updated wireless tools but Network Manager still refuses to
connect to my wireless network. I should note that this particular
network does not broadcast beacons, so I have to specifically go into
NetworkManagerInfo and tell it to use "Other Wireless Network" and
type in my network name
On Thu, 2005-04-07 at 16:29 -0400, Derek Atkins wrote:
> Quoting Dan Williams <[EMAIL PROTECTED]>:
>
>
> > > NetworkManager: Warning: the wireless card (ath0) requires too much time
> for
> > > scans. Its driver needs to be fixed.
> >
> > Part of this is a problem with wireless-tools, for which
Quoting Dan Williams <[EMAIL PROTECTED]>:
> > NetworkManager: Warning: the wireless card (ath0) requires too much time
for
> > scans. Its driver needs to be fixed.
>
> Part of this is a problem with wireless-tools, for which I'm pushing an
> FC3 update right now...
Excellent. I'm looking forw
On Thu, 2005-04-07 at 14:33 -0400, Derek Atkins wrote:
> Dan,
>
> > What you need to do to debug this is the following... In a separate
> > window, run the command "watch -n 1 iwconfig ath0" and let that run
> > while NM is trying to associate with the AP. Look at the MAC address
> > that the ca
Dan,
> What you need to do to debug this is the following... In a separate
> window, run the command "watch -n 1 iwconfig ath0" and let that run
> while NM is trying to associate with the AP. Look at the MAC address
> that the card reports, and if it changes to FF:FF:FF:FF:FF:FF too often
> duri
