On Thu, 2008-11-06 at 15:41 -0700, James Ward wrote:
Thanks Dan.
Here is the output:
NetworkManager: info Activation (ttyACM0) starting connection 'Auto
GSM network connection'
NetworkManager: info (ttyACM0): device state change: 3 - 4
NetworkManager: info Activation (ttyACM0) Stage 1
Sorry for stepping in again but...
The error is because NM normally send ATZ.
The F3507g module doesn't understand this command, it is using ATF
instead for reset.
James Ward wrote:
Thanks Dan.
Here is the output:
NetworkManager: info Activation (ttyACM0) starting connection 'Auto
GSM
Hello James,
Ok, I'll try describe a process here to get this modem running.
First, the thread you point to could make it work with a ppp connection.
That is not the way to do it though, since it has a much more efficient
way to do communication.
Here is a alternative howto:
1. Patch your
On Wed, 2008-11-05 at 15:36 -0700, James Ward wrote:
Hi,
I just recently upgraded to the Lenovo W500 laptop which has a built-in
Ericsson F2507g WAN card. Unfortunately I can't get this new card to
work with NM because it needs to be turned on first. There is a thread
about how to do this
Thanks Dan.
Here is the output:
NetworkManager: info Activation (ttyACM0) starting connection 'Auto
GSM network connection'
NetworkManager: info (ttyACM0): device state change: 3 - 4
NetworkManager: info Activation (ttyACM0) Stage 1 of 5 (Device
Prepare) scheduled...
NetworkManager: info
Hi,
I just recently upgraded to the Lenovo W500 laptop which has a built-in
Ericsson F2507g WAN card. Unfortunately I can't get this new card to
work with NM because it needs to be turned on first. There is a thread
about how to do this manually on Ubuntu:
