Re: Centos Stream 9: NetworkManager/conf.d/ override mtu received from dhcp

2022-03-31 Thread Thomas Haller via networkmanager-list
Hi,


On Wed, 2022-03-30 at 22:56 +, Stephen Horton via networkmanager-
list wrote:
> Hello, I'm new to the list; I am working on moving an application to
> Centos Stream 9 running inside an openstack cloud virtual guest.  I
> have created:
> /etc/NetworkManager/conf.d/90-dns-none.conf:
> [main]
> dns=none
> to prevent Network Manager from overwriting the /etc/resolv.conf with
> incorrect DNS server entries from our DHCP service. This is working.
> 
> I also need to tell Network Manager to override the MTU provided by
> the DHCP service (which is telling my interfaces to use mtu=9000).  I
> have created:
> /etc/NetworkManager/conf.d/91-mtu-none.conf:
> [connection]
> match-device=interface-name:eth0
> ethernet.mtu=0

this sets global defaults in NetworkManager.conf. This is documented in
`man NetworkManager.conf`. While you can do this, it seems preferable
to not change the default, but change the actual setting in the
respective profile.

  nmcli connection modify "$PROFILE" ethernet.mtu 1500


OK, granted, setting "ethernet.mtu=0" is documented to have a very
specific additional behavior, that is:

  If configured explicitly to 0, the MTU is not reconfigured during 
  device activation unless it is required due to IPv6 constraints.

Hm, the text reads as this should work. Maybe there is a bug in
handling `ethernet.mtu=0` in `NetworkManager.conf`.



> then: systemctl reload NetworkManager

This reloads configuration from NetworkManager.conf. That has no effect
on devices that are currently activated. To change the configuration of
a device, activate a profile with `nmcli connection up $PROFILE`. If
the device is already activated, then re-activate the profile with
`nmcli connection up $PROFILE`.

You can also use `nmcli device reapply $IFNAME` or `nmcli device modify
$IFNAME`, which does something slightly different but is a way to
change runtime configuration too. If you care about the difference,
read `man nmcli`. Otherwise, just do a full re-activation with `nmcli
conneciton up $PROFILE`.

> I can then:  nmcli device modify eth0 ethernet.mtu 1500  and it
> changes the mtu to 1500 (shown in: ip address show).  However, when I
> reboot, it changes back to mtu 9000.

`nmcli device modify` modifies the current runtime configuration. Read
`man nmcli` about what it does.

Usually, adjust the profile with `nmcli connection modify` and activate
the desired profile with `nmcli connection up`.

> 
> ifcfg-eth0 file still contains MTU=9000

A profile on disk gets modified by `nmcli connection modify $PROFILE`
(and a few other special cases, like when a system-wide password is
provided during activation).


> 
> Can someone provide some guidance on how this should work please?
> 


Maybe https://www.redhat.com/sysadmin/becoming-friends-networkmanager
is a useful introduction?



best,
Thomas

___
networkmanager-list mailing list
networkmanager-list@gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list


Centos Stream 9: NetworkManager/conf.d/ override mtu received from dhcp

2022-03-30 Thread Stephen Horton via networkmanager-list
Hello, I'm new to the list; I am working on moving an application to Centos 
Stream 9 running inside an openstack cloud virtual guest.  I have 
created:/etc/NetworkManager/conf.d/90-dns-none.conf:[main]dns=noneto prevent 
Network Manager from overwriting the /etc/resolv.conf with incorrect DNS server 
entries from our DHCP service. This is working.
I also need to tell Network Manager to override the MTU provided by the DHCP 
service (which is telling my interfaces to use mtu=9000).  I have 
created:/etc/NetworkManager/conf.d/91-mtu-none.conf:[connection]match-device=interface-name:eth0ethernet.mtu=0
then: systemctl reload NetworkManager
I can then:  nmcli device modify eth0 ethernet.mtu 1500  and it changes the mtu 
to 1500 (shown in: ip address show).  However, when I reboot, it changes back 
to mtu 9000.
ifcfg-eth0 file still contains MTU=9000
Can someone provide some guidance on how this should work please?
regards,Stephen___
networkmanager-list mailing list
networkmanager-list@gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list