ate-menus -v -n'
Also, you should log out and then back into your desktop
after running update-menus
> I am still getting the segmentation fault when I launch
> menudrake, sigh.
>
> Thanks,
> Hackhound
--
Tom Brinkman Corpus Christi, Texas
s mode=0620 0 0
(disabled by commenting out) in /etc/fstab. The advice on cooker
was to remove the line as 'pts' are no longer used. IIRC this
was early on in 10.1 development at the time of switching from
devfs to udev.
So I believe you've got it right Mikkel,
st rgds
>
More likely SATA, an WD could be part of the problem also
search 'sata' on both bugzilla and cooker
https://qa.mandrakesoft.com/
http://marc.theaimsgroup.com/?l=mandrake-cooker&w=2&r=1&s=sata&q=b
--
Tom Brinkman Corp
Don't be too quick tho, often bugs are
fixed before the community even reacts with bugzilla's or posts.
Sometimes not ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Wa
sed to hang out..but the ladies all laughed at me
>
> > Grin! Snicker!
Jeez, why not just answer the man's question?
qt 3.3.4 is already in 10.2
~ $ cat /etc/mandrake-release
Mandrakelinux release 10.2 (Cooker) for i586
~ $ frpm qt3
libqt3-devel-3.3.4-2mdk
qt3-example-
t-3.3.3/doc/html/qtabwidget-m.png
/usr/share/doc/qt-3.3.3/doc/html/qtabwidget-w.png
(This is on a 10.2 system, but 10.1 should be the same)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
__
On Sunday 23 January 2005 03:29 pm, Kaj Haulrich wrote:
> Tom Brinkman wrote :
>
> " I always prefer to put /swap as the first partition (hd?1) on
> a drive. R/W's slow as much as 40% the further down a partition
> is on a drive, regardless of the drive's rpms, siz
On Saturday 22 January 2005 04:38 pm, Julie Sloan wrote:
> Tom Brinkman wrote:
> > On Saturday 22 January 2005 10:32 am, Julie Sloan wrote:
> >>I copied /home to a CD, will reinstall 10.0, and hopefully
> >>during the reinstall will set up a storage partition or two.
&g
t in case I
need to --force them in again to replace (corrupted or deleted)
files. Specially helpful for kernels.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Servi
of '/' to
'/home' will depend on how much total space you have, but IME,
8gig for '/' and 12gig for /home is plenty ... specially if you
set aside storage space. For small Linux 'only' drives (<13gig),
I believ
tion now, and you
have enough diskspace on a storage partition, just copy your
entire /home directory to that partition. Then copy it back in
after a re-install of 10.0, overwriting the install /home. This
probly isn't practically feasible if your storage area is any
type of Windo
x27; to see if you can't fix
gcc. Ignore my version numbers, that's current 10.2, but make
sure you're using the same versions as already installed.
--force in this case will only replace packages and files. IMO,
it's abo
ide it. Sometimes both
ether/nic and USB alternatives. Avoid USB. If they only offer
USB, that doesn't mean you're stuck with it. Also state the ISP,
as somebody here probly already uses them and has experience to
share.
--
Tom Brinkman Corpus Christi, Texas
memory use (top), and
monitor the d/l directory's partition for disk space (df) from
early on. 'kdirstat' is also useful for this. Also check your
~/.xsession-errors file to make sure it's not inflating rapidly.
If you want f
rsions,
always from within KDE. I have no idea who or when this
fallacious advice originated, ie, "logout from KDE and/or X to
update". It simply isn't so.
This isn't Win$ux folks. What _is_ often needed is to update
the system after the updates are installed, eg, I use an alias
(as root), 'upall'
alias upall='rpm --rebuilddb && updatedb && ldconfig -v &&
update-menus -v -n'
Then log out and back into KDE to fully realize the updates.
It's a good idea to use while logged out to
restart the X server. Specially if updates were to X. If you're
setup to auto-login to KDE, this step will auto log you back into
KDE.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
t-3.9.0-2mdk)
>
> Tom, have you used Azureus. ... IMO the best BT-client out
> there
>
> /Anders
Nope, sort'a set in my ways ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
___
mall='normalize -m /home/tom/wav/*'
alias bacd='cdrecord -v -eject driveropts=burnfree speed=24
dev=ATA:1,1,0 -sao -pad -audio /home/tom/wav/*.wav'
IME, the resulting copy is often better than the original and
will play in even the cheapest junk player. -sao is very m
eg, 'bt name_of_the.torrent' and use completion. Then
you'll see the torrent start, download rates, and current seeders
and peers, progress, etc. It's also quicker to resume if you
need to stop it for any reason. Most all of this is recent
improvements in &#x
ou'll be better off. KDE3.3.1
shipped with 10.1 is alpha an buggy quality, IME. Cooker is
currently stable. Do it NOW while cooker is slow for the holidays
YMMV
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
burn on the fly with a GUI, or the files are just bad to
begin with. Next culprits could be a poor burner, or deficient
media, or burning too fast. Tho cdrecord often ignores your
requested speed, and burns at what it determines as optimum.
--
Tom Brinkman
n't used Intel in quite a while (P3 - BX was the last one).
Seems the latest ones (about 6 months old) are best supported
tho.
There's only one, more certain solution. Don't use desktop
or laptop hardware. Buy expensive production server kit designed
to run U
as gleaned from ML's and twiki's when it's contrary to
past and current developer's and maintainer's documentation.
Probly why after years, I hardly post anymore.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
On Friday 10 December 2004 07:30 pm, RickSisler wrote:
> Kaj Haulrich ([EMAIL PROTECTED]) wrote:
> > On Friday 10 December 2004 21:47, Tom Brinkman wrote:
> > > On Friday 10 December 2004 08:53 am, Keith Powell wrote:
> > > > > In /etc/lilo.conf try editing the
absolutely
necessary, to deal with sloppy, sub-standard hardware. Tho in
fairness, other popular distros do disable them by default. If
your system can't use these advanced features, don't kid youself
with believing that optimization for i586, i686, or K7, compiling
with PRE
> cdrecord: Cannot do inquiry for CD/DVD-Recorder.
> cdrecord: Success. test unit ready: scsi sendcmd: no error
> CDB: 00 00 00 00 00 00
> status: 0x4 (CONDITION MET/GOOD)
> cmd finished after 5.471s timeout 40s
> cdrecord: The unit seems to be hung and needs power cycling.
I d
ty clueless!!
> Regards Vegard
I should have asked last time, what Mandrake version?
No idea about 'NON CCS Disk'. Try looking around here,
http://www.google.com/linux?hl=en&lr=&ie=ISO-8859-1&q=NON+CCS+Disk&btnG=Google+Search
On Tuesday 07 December 2004 04:50 am, Vegard Lundby Rekaa wrote:
> Also, typing "cdrecord -scanbus" gives this result
Try 'cdrecord dev=ATA -scanbus'
--
Tom Brinkman Corpus Christi, Texas
poor
thruput. So I used a d-link NIC I already had. This is no longer
a problem tho, the 3c940 is well supported. In any event, should
you choose to, the onboard nic can be easily disabled in bios.
--
Tom Brinkman Corpus Christi, Texas
rate, GL_MESA_pack_invert,
GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite,
GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shad
rue
You could have this if you'd done a fresh install. Since you
upgraded you can try running 'generate-modprobe.conf' That will
try to convert your existing modules.conf (2.4.x kernels) into a
suitable modprobe.conf (2.6.x kernels). Backup your existing
modprobe.conf first
dded many Samsung
vendor specific drivers. I'm also using it with a GeForce card,
and the opensource 'nv' driver. I've had it quite a while, it's
great! I'd say the only important item would be to run the
monitor at it's 'native' (vendor sug
ne.so.4
libreadline4-4.3-7mdk
You might try installing the devel package. It could be that
on 10.0, the lib files were packaged separately in -devel
tom # urpmi -y libreadline4
The following packages contain libreadline4:
libreadline4
libreadline4-devel
--
Tom Brinkman Co
/mandrake-release
To be more concise, it changes the word 'Community' to
'Official'. NBFD ;)
tom $ cat /etc/mandrake-release
Mandrakelinux release 10.1 (Official) for i586
--
Tom Brinkman Corpus C
he
culprit. Since it's not a separate service, you'll need to kill
it's pid. It will still run again 'on request'.
I hate to say it, but sometimes only a reboot will free the CD
drive. Magic device in 10.1 is better, but still has occasional
glitches like yours.
--
On Sunday 31 October 2004 08:24 am, Anne Wilson wrote:
> On Sunday 31 Oct 2004 14:04, Tom Brinkman wrote:
> > FWIW, I use Kmail and simply tapped the 'L' key to reply
> > to the list. The 'R' key would've replied only to you Amy.
> > If I
roblem and those who don't properly
reply. Complaints about top posting, lack of snipping, spam, and
'reply to' . only serve to generate more bandwith waste.
Y'allsMMV
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
nux is Linux (the kernel), but the rest of
it (99%) is GNU software. They need your support just as much as
the Mandrake Club does.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to b
a "usage:" warning. This means devfs is not
being used. To be on the safe side, you can put 'devfs=nomount'
in your bootloader (lilo's append line).
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
___
f
you've got 10.1CE CD's you've got it. I went lookin for -10 on
the mirrors, specifically 'kernel-source' but didn't find it. In
my situation I'm still tryin to figure out why it makes such a
difference with my SATA/IDE mix.
Sorry, like I said, it's a
I believe Stew said much the
same.
I know reverting to 2.6.8.1-10 from -12mdk solved boot up
problems checking (Reiser) FS's after I added an SATA drive into
a mix of IDE drives a few weeks ago. With 2.6.8.1-12 the system
went crazy, but all is well with -10mdk. I've got a hu
he job! ... and I always
check the md5sum of the burned CD. As always, I disdain the use
of GUI apps for burning any kind of CD's, but particularly
for .iso images. Use the CL and you'll know exactly what is going
on. Y'allsMMV ;)
--
Tom Brinkman Corpu
ode 2nd pass proccess, I
used mplayer to preview what had been completed (about 80mb, 5%)
of the .avi file created so far. Sure'nough, it was the
commentary track. So I had to cancel and re-start trancoding
using track 0: Two hours wasted again ;(
--
Tom Brinkman
when comparing those update
> versions to my "cooker" versions, mine seems to be newer.
>
> Can anyone explain ? - Tom ?
>
> Kaj Haulrich.
The newer files almost certainly have the security (and
bug) fixes.
--
Tom Brinkman Corpus
IRC, kdepim*, lm_sensors,
and a few minor packages. Most likely updates that will be
available for 10.1 OE anyhow.
BUT, do it _now_! Cooker will unfreeze and begin 10.2
development shortly. As to Dan's misgivings, using 2.6.8.1-12
kernel and kernel-source from a cooker mirror will not p
mbine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR
,0
-dao Name_of_file.iso'on the command line. You'll probly
have to adjust your speed and dev from mine. The most important
bit is -dao. Do not use parameters like -data or -pad.
Bottom line is until you get the iso's to match md5sum before
and _AFTER_ burning ... y
Yes, prohibitively so. Fact is, for those that don't have
highspeed connections or don't wanna fool with the torrents
Websites like cheapbytes and others do, and they're some of
the first to grab the CD's. EG, Cheapbytes has 10.1 CE 5 CD sets
av
the 'L' key ('R' would reply
only to you {lower case l's & r's}) in Kmail. However the 'reply
to' is set, that forces a reply to the list. Other email clients
have similar functions. If they don't... don't use 'em.
--
Tom Brinkman
day (Saturday).
I'll keep uploadin 1,2,3,4,5 for about 8 days til I need to
go out of town. Torrents depend on those who have succesful d/l's
to keep uploadin.
BTW, check out KDE3.3 on CD5 ;)
--
Tom Brinkman Corpus Christi, Texas
On Tuesday 14 September 2004 12:35 pm, Ron Hunter-Duvar wrote:
> On September 14, 2004 07:37, Tom Brinkman wrote:
> ...
>
> > urpmi rkhunter
>
> I have contrib defined (using proxad.net, b/c all the North
> American mirrors seem to be unreliable), but urpmi rkhunter
>
looks somethin
like# CONFIG_EDD is not set , remove the leading hash
(ie, uncomment the line) and edit it to CONFIG_EDD=y
Save that .config to a another, eg, .config.save ... and after
moving it back into .config after the 'make
mrproper' (mandatory)
004 17:13:16 +0100
> >
> > Derek Jennings wrote:
> > > Now the question is. How can I record a real audio stream?
> > > RealPlayer 10 plays the preview stream OK, but I cannot
> > > persuade mplayer to play it.
> >
> > xine hand
reply. For your board,
SYS is your chipset, SBr can be taken as your case temp. 26C is
79F, and that should be close to, but a touch higher than your
ambient room temperature. Which it appears to be so.
--
Tom Brinkman Corpus Christi, Texas
Proud to be
On Friday 03 September 2004 04:06 pm, Chris wrote:
> On Friday 03 September 2004 09:50 am, Tom Brinkman wrote:
> > SYS = SBr On most all boards the SB temp is from a
> > thermistor at or very near the boards main chipset. The
> > warmest part of your motherboard. Usu
th those temps are about right for moderate (normal) loads
in relatively normal ambient (room) temp, 75 to 80F.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Servi
several times daily, the problem was
eventually fixed. In the meantime, as root,
'rm -f .xsession-errors', log out of KDE and then back in. A new,
small .xsession-errors will be recreated. As root make it read
only. Not a fix, but it will prevent the file from filling up
your partit
On Sunday 29 August 2004 05:28 am, Richard Urwin wrote:
> On Saturday 28 Aug 2004 9:20 pm, Tom Brinkman wrote:
> > On Saturday 28 August 2004 02:41 pm, Charlie Mahan wrote:
> > > -BEGIN PGP SIGNED MESSAGE-
> > > Hash: SHA1
> > >
> > > On Satur
compressed files, even windoze .zips, if you have the proper
decompress utils installed. Both it an FileRunner will even
handle .rar's
Tho I usually do those on the CL
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
_
On Wednesday 25 August 2004 07:28 pm, Chris wrote:
> On Wednesday 25 August 2004 07:32 am, JoeHill wrote:
> > Some aliases you can add to your .bashrc once you get the
> > hang of it (these are courtesy of the great command line CD
> > writing guru Mr. Tom Brinkman):
> &g
pdated (now past beta 2) to
current cooker. I lost my cd drives with udev, so I urpme'd it
and re-installed devfs, edited lilo.conf to devfs=mount . Now
they're again recognized as ATA: devices.
You might try the install again, choosing devfs in pkg
selection. (which should elimin
hen I ran,
./pxupdate-1.38-i686-pc-linux-gnu dev=ATA:1,1,0 PremiumV105.bin
which gave me a warning that I should be in lvl 1, but
asked, continue y/n? I chose 'y' and the flash was successfully
completed in a few seconds.
tom # hdparm -i /dev/hdd
/dev/hdd:
Model=PLEXTOR CD-
On Thursday 19 August 2004 10:30 am, Hoyt Bailey wrote:
> On Thursday 19 August 2004 09:25, Tom Brinkman wrote:
> > On Thursday 19 August 2004 05:19 am, SnapafunFrank wrote:
> > > Thereidos wrote:
> Ok Tom I'm confused while using 2.6.3-7 I was using nvidia
>
, security issues, and kernel taints and problems
that closed source drivers introduce to your system. lkml won't
even accept bug reports when closed source drivers are in use.
IMO Mandrake shouldn't either as they are by nature of being
closed and proprietary, unsupportable and at be
ast booted. The
mesgs you're lookin for won't be there tho. Without knowing what
type(s) of file system you're using, you'll just need to look
around in var/log/ and it subdirectories for what you want. I'd
use 'mc' to do that. Caution tho, warnings
lts to 2880. A utility such as cdrecord may be used
to burn the ISO file to a recordable CD medium."
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy you
e updates. Then logout and back into
your WM. I always do a while log'd out to restart
the X server, which also auto-log's me back into my desktop
(KDE).
.
Charlie, come over to the darkside.
[EMAIL PROTECTED]
--
Tom Brinkman Corpus Chris
that are smarter than us
think is useless ;(
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
top'
Just because these commands require root privilege, doesn't mean
you're online connected as root.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or
gt; HTH
> RickS
Thanks! That's a much better solution than I posted
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go t
pm -qa | grep
> > -i') so just 'frpm plf > plf_rpms.txt' does the deal.
Well, partner share the script with the list :) Yeah,
shortly after I hit send it occurred to me that adding 'sort'
would make the result more useful. .
like Charles' 'cae' rpms, just add that step into the mix.
BTW I use an alias to save typing (alias frpm='rpm -qa | grep -i')
so just 'frpm plf > plf_rpms.txt' does the deal.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
between.
To put this in perspective, a good 56k dialup will yield about
4.7 K/s. So my DSL is about 35 times faster than the best dialup,
but for 4 times the cost. On the plus side, aDSL has POTS (voice
phone line) piggybacked on and I can download at 160KB/s and
still talk on the phone
nual warned not to try and use Linux on it.
But when challenged, he couldn't find that part, admitted he just
'heard that'.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
__
icon with hammer and screwdriver ->
> CD player and uncheck autoplay when CD inserted.
>
> HTH,
>
> -Frans
Another solution: as root, 'urpme magicdev' followed by
'supermount -i enable && mount -a'
--
Tom Brinkman Corpus Chr
e new alias edited in,
the file saved At that point start a new console and check
that your new alias works as you want, expected it to. If it
does, then close the original console/editor.
--
Tom Brinkman Corpus Christi, Texas
Proud to be
methin wrong when I got a promtp like yours, and my dsl
connection was fubar'd at the same time.
Maybe you've got hostname screwed up somewhere along the line?
I don't fool with it because it can break so many things.
There's several hands on this list that would be bette
ed to re-do a 'adsl-setup'
> >
> > I avoid usin Mandrake's 'drakconnect'. I believe recent
> > Mandrake versions install rp-pppoe when you choose 'adsl'
> > during install anyhow.
> > --
> > Tom Brinkman
or legal reasons. I also suggest you switch to the PLF
xine and mplayer versions. They have capabilities Mandrake can't
include (legal reasons again).
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
On Wednesday 30 June 2004 12:28 pm, Hoyt Bailey wrote:
> On Wednesday 30 June 2004 11:21, Tom Brinkman wrote:
> My data: From sbcglobal.net.
> Primary DNS address 151.164.1.8
> Secondary DNS address 206.13.28.12
> Question: Where do I put it so rp-ppoe or DNS of whatever does
>
On Tuesday 29 June 2004 03:13 pm, Hoyt Bailey wrote:
> On Tuesday 29 June 2004 10:00, Tom Brinkman wrote:
> > On Tuesday 29 June 2004 07:03 am, Hoyt Bailey wrote:
> > > On Tuesday 29 June 2004 06:44, Fajar Priyanto wrote:
> > > > Your problem seems to be
tom $ cat /etc/ppp/resolv.conf
nameserver 151.164.79.201
nameserver 151.164.11.201
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http:/
On Monday 28 June 2004 08:36 am, EE wrote:
> When is the next version comming out?
http://qa.mandrakesoft.com/twiki/bin/view/Main/Mandrakelinux101
--
Tom Brinkman Corpus Christi, Texas
Proud to be an Ameri
down when the cpu isn't under
load. The fallacy there is that cpu core temp and load can spike
up instantly heatsinks by the nature of their mass, take a
long time to cool to respond. On most laptops this is a
necessary evil. Don't do it with a desktop, certainly
olor levels, sound
volume are instantly adjustable on-the-fly right from the
keyboard. Just tap 1-2, 3-4, 5-6, 7-8, or 9-0. Some DVD's
start, the sound is goin, but the screen is completely black.
Tapping the 'f' key twice immediately restores
On Tuesday 01 June 2004 07:45 am, The Other wrote:
> On Mon, 31 May 2004 12:39:38 -0500, Tom Brinkman
>
> <[EMAIL PROTECTED]> wrote:
> > Use 'rpm -qa | grep -i kernel' to list installed kernels,
> > then 'urpme kernel-x.x.x' to remove all o
how do you remove old
> > > versions from the LILO Screen? I have limited space and
> > > want to clear out as much old stuff as possible.
> > >
> > > Thanks,
> > > Steve
> >
> > Just delete the kernels you don't want...do you KNOW what
&g
e the binary first.
I just 'cp /usr/bin/unrar /usr/bin/rar'
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://
e to make target `MACLib/NNFilterAsm.nas', needed
by `MACLib/NNFilterAsm.o'. Stop.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
p/index2.html#ape
>
> Todd ;)
I got that file yesterday (precompiled 'mppdec' for linux),
but haven't had much luck with it. I was hopin some of y'all knew
of better options than an app targeted to Windoze users. But
thanks. Guess I'll try the source code at
noticably better than mp3's normalized to
wav's an burned to CD's.
BUT, I'm at a loss with .ape's. Google only has me more
confused. Other than to point out it's mainly pointed at Windoze
machines/OS.
So... criticise my flac conversion, ogg2wav, an give me
your system remains
> stable. I'm curious.
>
> If in fact you've already tried this, just let me know.
> Otherwise, I'm all ears.
>
> LX
FWIW, video shadowing is generally OK. Enabling further bios
shadowing is NOT.
--
Tom Brinkman Cor
h.
Been an associate member for years. Money well spent. I see
Novell, RedHat, and particularly IBM are helpin with GPL defense/
enforcement too
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
_
ASUS) @ 0x000f62a
|
(snip)
|
PCI: Using ACPI for IRQ routing
apm: overridden by ACPI.
ACPI: (supports S0 S1 S4 S5)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to
aults to the filename "rescue.iso", and
the --size defaults to 2880. A utility such as cdrecord may be
used to burn the ISO file to a recordable CD medium.
I dunno if this image would also be suitable on a zip drive,
but you can always just try it.
--
Tom Brinkman
#x27;ll know I'm not avoiding you, I've never used a
winmodem or one that needs a driver. Sorry, can't help. I'd
suggest you close this thread and start a new one appropriately
titled to the problem.
--
Tom Brinkman
n tho your 2.6 kernel doesn't
use it. Back up any files you make changes to before you edit
them. You might just need 'em later if you install a newer
kernel.
> The cdrecord -scanbus produced a long file. Included was:
You need to use 'cdrecord dev=ATA -scanbus'
Never mind let me do some experimentin... Thanks,
Meantime (back at the ranch), Stream Tuner and Cowboy Cultural
Society keep me fairly busy
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
W
d Tim are often there to help. As they are here
too, as are several others, the OP Greg Meyers included.
Sometimes I reckon y'all would be better off just run'n cooker
and subscribin to those lists. You wouldn't have to put up with
me ... near as much, horses mouth alerts
On Sunday 09 May 2004 08:56 am, Ronald J. Hall wrote:
> On Sunday 09 May 2004 09:44 am, Tom Brinkman wrote:
>
> ->Hell, I'm still tryin to figure out what y'all are talkin
> ->about ;)Not to hijack, but I will since the original
> query ->seems to
Prepare to forget, undo/re-learn all this when you upgrade to
10.1, or a newer kernel than 10.0 came with.
In fairness it's not all Mandrakes doin. Currently Linus and
much of lkml is at odds with cdrecord and it's author. A fresh
install rather than an 'upgrade from&#
1 - 100 of 1753 matches
Mail list logo
