getting the segmentation fault when I launch
menudrake, sigh.
Thanks,
Hackhound
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go
as 'pts' are no longer used. IIRC this
was early on in 10.1 development at the time of switching from
devfs to udev.
So I believe you've got it right Mikkel, those that upgraded to
10.1 should either remove the line, or comment it out.
--
Tom Brinkman Corpus Christi, Texas
SATA, an WD could be part of the problem also
search 'sata' on both bugzilla and cooker
https://qa.mandrakesoft.com/
http://marc.theaimsgroup.com/?l=mandrake-cookerw=2r=1s=sataq=b
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
.
Sometimes not ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
~ $ frpm qt3
libqt3-devel-3.3.4-2mdk
qt3-example-3.3.4-2mdk
libqt3-3.3.4-2mdk
qt3-common-3.3.4-2mdk
(alias frpm='rpm -qa | grep -i')
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy
/html/classKTabWidget__inherit__graph.png
/usr/share/doc/HTML/en/kdelibs-apidocs/kdeui/html/classKTabWidget__coll__graph.png
/usr/share/doc/qt-3.3.3/doc/html/qtabwidget-m.png
/usr/share/doc/qt-3.3.3/doc/html/qtabwidget-w.png
(This is on a 10.2 system, but 10.1 should be the same)
--
Tom
On Sunday 23 January 2005 03:29 pm, Kaj Haulrich wrote:
Tom Brinkman wrote :
I always prefer to put /swap as the first partition (hd?1) on
a drive. R/W's slow as much as 40% the further down a partition
is on a drive, regardless of the drive's rpms, size, number of
disks, age, etc
. Specially helpful for kernels.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
On Saturday 22 January 2005 04:38 pm, Julie Sloan wrote:
Tom Brinkman wrote:
On Saturday 22 January 2005 10:32 am, Julie Sloan wrote:
I copied /home to a CD, will reinstall 10.0, and hopefully
during the reinstall will set up a storage partition or two.
I'm dualbooting WinXP and Mandrake
/home directory to that partition. Then copy it back in
after a re-install of 10.0, overwriting the install /home. This
probly isn't practically feasible if your storage area is any
type of Windoze file system. It's possible, but much more
complicated.
--
Tom Brinkman
Linux 'only' drives (13gig),
I believe putting everything one big 'ol '/' partition, with a
suitable /swap partition is best use.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your
server. Specially if updates were to X. If you're
setup to auto-login to KDE, this step will auto log you back into
KDE.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack
-errors file to make sure it's not inflating rapidly.
If you want further opinion, you'll need to send me the
torrent file.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your
it. Sometimes both
ether/nic and USB alternatives. Avoid USB. If they only offer
USB, that doesn't mean you're stuck with it. Also state the ISP,
as somebody here probly already uses them and has experience to
share.
--
Tom Brinkman Corpus Christi, Texas
Proud
the same versions as already installed.
--force in this case will only replace packages and files. IMO,
it's about the only proper use of --force.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
completion. Then
you'll see the torrent start, download rates, and current seeders
and peers, progress, etc. It's also quicker to resume if you
need to stop it for any reason. Most all of this is recent
improvements in 'bittorrent'. (bittorrent-3.9.0-2mdk)
--
Tom Brinkman
better than the original and
will play in even the cheapest junk player. -sao is very much
needed in the above cdrecord command when copying CD's that are
at or very near the 80 minute limit. speed=24 is 1/2 speed for
my burner and the media I use.
--
Tom Brinkman Corpus
set in my ways ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
really
want KDE3.3, setup cooker sources and use urpmi to update to KDE
3.3.2, (complete cooker 10.2) You'll be better off. KDE3.3.1
shipped with 10.1 is alpha an buggy quality, IME. Cooker is
currently stable. Do it NOW while cooker is slow for the holidays
YMMV
--
Tom Brinkman
) are best supported
tho.
There's only one, more certain solution. Don't use desktop
or laptop hardware. Buy expensive production server kit designed
to run Un*x ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
disable them by default. If
your system can't use these advanced features, don't kid youself
with believing that optimization for i586, i686, or K7, compiling
with PREEMPT and such, will provide any benefit.
--
Tom Brinkman Corpus Christi, Texas
Proud
On Friday 10 December 2004 07:30 pm, RickSisler wrote:
Kaj Haulrich ([EMAIL PROTECTED]) wrote:
On Friday 10 December 2004 21:47, Tom Brinkman wrote:
On Friday 10 December 2004 08:53 am, Keith Powell wrote:
In /etc/lilo.conf try editing the append-line,
especially the apic thing
as gleaned from ML's and twiki's when it's contrary to
past and current developer's and maintainer's documentation.
Probly why after years, I hardly post anymore.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
+DiskbtnG=Google+Search
What does 'cdrecord dev=ATA:1,0,0 -checkdrive' return?
You might also try it for your CDrom, dev=ATA:1,1,0
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want
.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Tuesday 07 December 2004 04:50 am, Vegard Lundby Rekaa wrote:
Also, typing cdrecord -scanbus gives this result
Try 'cdrecord dev=ATA -scanbus'
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
had. This is no longer
a problem tho, the 3c940 is well supported. In any event, should
you choose to, the onboard nic can be easily disabled in bios.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
snip
--
Tom Brinkman Corpus Christi, Texas
on this, as my SATA drive also
uses SCSI emulation. IOW's, the modprobe.conf line above might
not be needed on your system. So if you don't have it, try a
test burn without it.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
,
and the opensource 'nv' driver. I've had it quite a while, it's
great! I'd say the only important item would be to run the
monitor at it's 'native' (vendor suggested) resolution. For mine
that's 1280x1024 @ 75Hz
--
Tom Brinkman Corpus Christi, Texas
Proud
the devel package. It could be that
on 10.0, the lib files were packaged separately in -devel
tom # urpmi -y libreadline4
The following packages contain libreadline4:
libreadline4
libreadline4-devel
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
in 10.1 is better, but still has occasional
glitches like yours.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http
, it changes the word 'Community' to
'Official'. NBFD ;)
tom $ cat /etc/mandrake-release
Mandrakelinux release 10.1 (Official) for i586
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want
of snipping, spam, and
'reply to' . only serve to generate more bandwith waste.
Y'allsMMV
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from
On Sunday 31 October 2004 08:24 am, Anne Wilson wrote:
On Sunday 31 Oct 2004 14:04, Tom Brinkman wrote:
FWIW, I use Kmail and simply tapped the 'L' key to reply
to the list. The 'R' key would've replied only to you Amy.
If I chose to use a mail client without this simple feature
bootloader (lilo's append line).
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
of
it (99%) is GNU software. They need your support just as much as
the Mandrake Club does.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go
drives a few weeks ago. With 2.6.8.1-12 the system
went crazy, but all is well with -10mdk. I've got a hunch the
'camera' problem is similar. Just a suspicion tho
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
, specifically 'kernel-source' but didn't find it. In
my situation I'm still tryin to figure out why it makes such a
difference with my SATA/IDE mix.
Sorry, like I said, it's a hunch
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
on. Y'allsMMV ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
to my cooker versions, mine seems to be newer.
Can anyone explain ? - Tom ?
Kaj Haulrich.
The newer files almost certainly have the security (and
bug) fixes.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
mplayer to preview what had been completed (about 80mb, 5%)
of the .avi file created so far. Sure'nough, it was the
commentary track. So I had to cancel and re-start trancoding
using track 0: Two hours wasted again ;(
--
Tom Brinkman Corpus Christi, Texas
. As to Dan's misgivings, using 2.6.8.1-12
kernel and kernel-source from a cooker mirror will not pose a
problem on a 10.1 system. This kernel has been in use for quite
some time and is well tested.
--
Tom Brinkman Corpus Christi, Texas
Proud
, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from
not use parameters like -data or -pad.
Bottom line is until you get the iso's to match md5sum before
and _AFTER_ burning ... you don't know if you have bonafide CD's.
If you still have an install problem, hopefully it'll be fixed by
10.1 Official ;)
--
Tom Brinkman
. Fact is, for those that don't have
highspeed connections or don't wanna fool with the torrents
Websites like cheapbytes and others do, and they're some of
the first to grab the CD's. EG, Cheapbytes has 10.1 CE 5 CD sets
available right now.
--
Tom Brinkman Corpus
on those who have succesful d/l's
to keep uploadin.
BTW, check out KDE3.3 on CD5 ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft
. Other email clients
have similar functions. If they don't... don't use 'em.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http
On Tuesday 14 September 2004 12:35 pm, Ron Hunter-Duvar wrote:
On September 14, 2004 07:37, Tom Brinkman wrote:
...
urpmi rkhunter
I have contrib defined (using proxad.net, b/c all the North
American mirrors seem to be unreliable), but urpmi rkhunter
gives me no package named rkhunter. I
?
RealPlayer 10 plays the preview stream OK, but I cannot
persuade mplayer to play it.
xine handles it without problem for me
Charles
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
the new kernel an option
on boot. Your new kernel will not be the default, you'll have to
choose it on booting up.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services
On Friday 03 September 2004 04:06 pm, Chris wrote:
On Friday 03 September 2004 09:50 am, Tom Brinkman wrote:
SYS = SBr On most all boards the SB temp is from a
thermistor at or very near the boards main chipset. The
warmest part of your motherboard. Usually taken from a pin
board,
SYS is your chipset, SBr can be taken as your case temp. 26C is
79F, and that should be close to, but a touch higher than your
ambient room temperature. Which it appears to be so.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
(normal) loads
in relatively normal ambient (room) temp, 75 to 80F.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http
filling up
your partition.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
On Sunday 29 August 2004 05:28 am, Richard Urwin wrote:
On Saturday 28 Aug 2004 9:20 pm, Tom Brinkman wrote:
On Saturday 28 August 2004 02:41 pm, Charlie Mahan wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 28 August 2004 13:23:01, Greg Meyer wrote:
I figure
. Both it an FileRunner will even
handle .rar's
Tho I usually do those on the CL
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go
On Wednesday 25 August 2004 07:28 pm, Chris wrote:
On Wednesday 25 August 2004 07:32 am, JoeHill wrote:
Some aliases you can add to your .bashrc once you get the
hang of it (these are courtesy of the great command line CD
writing guru Mr. Tom Brinkman):
alias bdcd='cdrecord -v -eject
, edited lilo.conf to devfs=mount . Now
they're again recognized as ATA: devices.
You might try the install again, choosing devfs in pkg
selection. (which should eliminte udev ?) ... or search 'udev'
on the cooker ml archive or bugzilla for more (better;) info.
--
Tom Brinkman
, continue y/n? I chose 'y' and the flash was successfully
completed in a few seconds.
tom # hdparm -i /dev/hdd
/dev/hdd:
Model=PLEXTOR CD-R PREMIUM, FwRev=1.05, SerialNo=115897
Nothin to it, easy as pie ;)
--
Tom Brinkman Corpus Christi, Texas
Proud
On Thursday 19 August 2004 10:30 am, Hoyt Bailey wrote:
On Thursday 19 August 2004 09:25, Tom Brinkman wrote:
On Thursday 19 August 2004 05:19 am, SnapafunFrank wrote:
Thereidos wrote:
Ok Tom I'm confused while using 2.6.3-7 I was using nvidia
driver confirmed in /etc./X11/XF86Config-4
shouldn't either as they are by nature of being
closed and proprietary, unsupportable and at best, beta quality.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack
be used
to burn the ISO file to a recordable CD medium.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join
system you're using, you'll just need to look
around in var/log/ and it subdirectories for what you want. I'd
use 'mc' to do that. Caution tho, warnings are not errors.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
server, which also auto-log's me back into my desktop
(KDE).
.
Charlie, come over to the darkside.
[EMAIL PROTECTED]
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want
;(
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
you're online connected as root.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
solution than I posted
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
only, so I've got a list to go by after a
fresh install to replace PLF packages. If you've got others,
like Charles' 'cae' rpms, just add that step into the mix.
BTW I use an alias to save typing (alias frpm='rpm -qa | grep -i')
so just 'frpm plf plf_rpms.txt' does the deal.
--
Tom
useful. or there was a more
elegant way to to this chore.
Maybe newbie can show 'expert' and 'cooker' a useful tool ;)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your
, aDSL has POTS (voice
phone line) piggybacked on and I can download at 160KB/s and
still talk on the phone. Tho phone service is a separate charge,
just as it is with dialup.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
couldn't find that part, admitted he just
'heard that'.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
magicdev' followed by
'supermount -i enable mount -a'
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
edited in,
the file saved At that point start a new console and check
that your new alias works as you want, expected it to. If it
does, then close the original console/editor.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
On Wednesday 30 June 2004 12:28 pm, Hoyt Bailey wrote:
On Wednesday 30 June 2004 11:21, Tom Brinkman wrote:
My data: From sbcglobal.net.
Primary DNS address 151.164.1.8
Secondary DNS address 206.13.28.12
Question: Where do I put it so rp-ppoe or DNS of whatever does
it will put it in '/etc
suggest you switch to the PLF
xine and mplayer versions. They have capabilities Mandrake can't
include (legal reasons again).
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack
'adsl'
during install anyhow.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Thanks for your advise I know all of ppp is installed but I
dont think its being used.
--
Regards;
Hoyt
I forgot one thing Hoyt. SBC (at least here
hostname screwed up somewhere along the line?
I don't fool with it because it can break so many things.
There's several hands on this list that would be better at helpin
you than me.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
On Tuesday 29 June 2004 03:13 pm, Hoyt Bailey wrote:
On Tuesday 29 June 2004 10:00, Tom Brinkman wrote:
On Tuesday 29 June 2004 07:03 am, Hoyt Bailey wrote:
On Tuesday 29 June 2004 06:44, Fajar Priyanto wrote:
Your problem seems to be in the name server 192.168.0.1
Ok any ideas
nameserver 151.164.11.201
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
On Monday 28 June 2004 08:36 am, EE wrote:
When is the next version comming out?
http://qa.mandrakesoft.com/twiki/bin/view/Main/Mandrakelinux101
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
heatsinks by the nature of their mass, take a
long time to cool to respond. On most laptops this is a
necessary evil. Don't do it with a desktop, certainly not with a
server.
One more thing. cpu's that have been run hot ... don't heal.
--
Tom Brinkman Corpus Christi
window frame. Just tap the Space-bar to pause,
arrow keys (- or -) will goback or advance the movie.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from
On Tuesday 01 June 2004 07:45 am, The Other wrote:
On Mon, 31 May 2004 12:39:38 -0500, Tom Brinkman
[EMAIL PROTECTED] wrote:
Use 'rpm -qa | grep -i kernel' to list installed kernels,
then 'urpme kernel-x.x.x' to remove all of of the one(s)
you want to remove. Example:
So if I
you don't want...do you KNOW what
kernels you don't want?
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http
/unrar /usr/bin/rar'
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
much luck with it. I was hopin some of y'all knew
of better options than an app targeted to Windoze users. But
thanks. Guess I'll try the source code at www.monkeysaudio.com as
Charles noted, or the source at your link Todd.
--
Tom Brinkman Corpus Christi, Texas
/NNFilterAsm.nas', needed
by `MACLib/NNFilterAsm.o'. Stop.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join
with .ape's. Google only has me more
confused. Other than to point out it's mainly pointed at Windoze
machines/OS.
So... criticise my flac conversion, ogg2wav, an give me some
help with monkeys ;) There's some stuff on ... lossless.country
I'd like to try out
--
Tom Brinkman
for years. Money well spent. I see
Novell, RedHat, and particularly IBM are helpin with GPL defense/
enforcement too
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack
remains
stable. I'm curious.
If in fact you've already tried this, just let me know.
Otherwise, I'm all ears.
LX
FWIW, video shadowing is generally OK. Enabling further bios
shadowing is NOT.
--
Tom Brinkman Corpus Christi, Texas
Proud
S4 S5)
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
that needs a driver. Sorry, can't help. I'd
suggest you close this thread and start a new one appropriately
titled to the problem.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy
. A utility such as cdrecord may be
used to burn the ISO file to a recordable CD medium.
I dunno if this image would also be suitable on a zip drive,
but you can always just try it.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
install a newer
kernel.
The cdrecord -scanbus produced a long file. Included was:
You need to use 'cdrecord dev=ATA -scanbus'
After making all the changes above, it'd probly be easiest
just to reboot. Your cd drive should then be working properly.
--
Tom Brinkman
... but what'a heck, it works
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
. A fresh
install rather than an 'upgrade from' probly would'a avoided the
CD-RW problem tho.
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from
On Sunday 09 May 2004 08:56 am, Ronald J. Hall wrote:
On Sunday 09 May 2004 09:44 am, Tom Brinkman wrote:
-Hell, I'm still tryin to figure out what y'all are talkin
-about ;)Not to hijack, but I will since the original
query -seems to be satisfied ;)
I think he was referring to what
and advice there.
Probly the closest you can get to guru's and current advice ;
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack or Services from MandrakeSoft?
Go to http
experimentin... Thanks,
Meantime (back at the ranch), Stream Tuner and Cowboy Cultural
Society keep me fairly busy
--
Tom Brinkman Corpus Christi, Texas
Proud to be an American
Want to buy your Pack
1 - 100 di 1712 matches
Mail list logo
