Re: nginx-quic socket() 0.0.0.0:80 failed (94: Socket type not supported)

Ok fixed the patch and yup working now! No more socket() 0.0.0.0:80 failed (94: Socket type not supported) errors when listen directive is not specifically set. Thanks Roman! Posted at Nginx Forum: https://forum.nginx.org/read.php?2,295642,295646#msg-295646

Re: nginx-quic socket() 0.0.0.0:80 failed (94: Socket type not supported)

That was a quick reply, was about to pop on Nginx slack channel :) Tried the patch but getting patching file src/http/ngx_http_core_module.c patch: malformed patch at line 18: lsopt.socklen = sizeof(struct sockaddr_in); Posted at Nginx Forum:

nginx-quic socket() 0.0.0.0:80 failed (94: Socket type not supported)

I tested nginx-quic https://quic.nginx.org/README for HTTP/3 over QUIC using quictls openssl 1.1.1q forked library and ran into an interesting error for non-HTTPS nginx vhost configurations. If non-HTTPS nginx vhost doesn't specifically list the listen directive for port 80, I get this error when

Re: Nginx map assigned variable usage in upstream?

I see. I am currently trying to use the $pool assigned variable for PHP-FPM though as in fastcgi_pass $pool; and not proxy_pass Posted at Nginx Forum: https://forum.nginx.org/read.php?2,293738,293741#msg-293741 ___ nginx mailing list --

Nginx map assigned variable usage in upstream?

:9000; "~/index.php/args" 127.0.0.1:9002; } upstream php { zone php_zone 64k; server $pool; keepalive 2; } But if I try this, nginx config test gives me nginx -t nginx: [emerg] host not found in upstream "$pool" in ... What am I missing? cheers George Posted at

Re: nginx-1.21.5

Maxim Dounin Wrote: --- > Hello! > > On Wed, Dec 29, 2021 at 11:30:04PM -0500, George wrote: > > > Thanks for PCRE2 support! > > > > From what I read Nginx 1.21.5 will default to PCRE2 if found or > fallback to

Re: nginx-1.21.5

Thanks for PCRE2 support! >From what I read Nginx 1.21.5 will default to PCRE2 if found or fallback to PCRE if not You can disable PCRE2 default by passing --without-pcre2 flag - which works fine and ldd $(which nginx) shows libpcre.so.1 => /usr/local/nginx-dep/lib/libpcre.so.1

handling client disconnect. call-back?

disconnects? This would be useful when the upstream is not good at directly handling the disconnect (not async, and still processing the response for the now-disconnected client). This could help clean up resources, on a parallel channel. Best, George Posted at Nginx Forum: https://forum.nginx.org

Re: how to configure request rate limiting by Kerberos authenticated user?

Thank you Maxim. Adding an extra variable to the spnego auth module sounds intriguing, but also challenging because; as you mention "rate limiting happens before access checks" and this module mainly deals with access checks until now. Sounds like an extra level of proxying is the way ahead for

how to configure request rate limiting by Kerberos authenticated user?

d-User $remote_user;"... Apparently $remote_user only works for request limiting when using basic authentication. Thank you for any suggestions/pointers. Best, George -- This message, and any attachments, is for the intended rec

Re: duplicate listen options for backlog directive for ip:80 and ip:443 pairs ?

I see. Thanks Maxim for the clarification. Much appreciated :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,284368,284402#msg-284402 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

duplicate listen options for backlog directive for ip:80 and ip:443 pairs ?

I am trying to troubleshoot a duplicate listen options error that only happens on one server and not the other. >From docs at http://nginx.org/en/docs/http/ngx_http_core_module.html backlog listen directive works for each ip:port pair so I should be able to set backlog directive on listen

Re: Google QUIC support in nginx

Roadmap suggests it is in Nginx 1.17 mainline QUIC = HTTP/3 https://trac.nginx.org/nginx/roadmap :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,256352,284367#msg-284367 ___ nginx mailing list nginx@nginx.org

Re: https://hg.nginx.org certificate error ?

yeah updated mercurial works https://forum.nginx.org/read.php?2,283686,283694#msg-283694 though centos 7 still will use non-SNI supported mercurial 2.6.2 so folks doing hg clone for njs repo will always have this issue. Posted at Nginx Forum:

Re: https://hg.nginx.org certificate error ?

okay part of the problem is centos 7 uses mercurial 2.6.2 and fix is to update to mercurial >2.7.9 for SNI support hg --version Mercurial Distributed SCM (version 2.6.2) (see http://mercurial.selenic.com for more information) Copyright (C) 2005-2012 Matt Mackall and others This is free software;

Re: https://hg.nginx.org certificate error ?

looks like hg clone is a non-SNI request so looked up pubserv.nginx.com's SSL cert *.nginx.com common name so maybe best to add *.nginx.org as well to pubserv.nginx.com server's SSL cert ? Posted at Nginx Forum: https://forum.nginx.org/read.php?2,283686,283692#msg-283692

Re: https://hg.nginx.org certificate error ?

testssl 3.0rc4 output for testssl hg.nginx.org:443 Testing server defaults (Server Hello) TLS extensions (standard)"server name/#0" "renegotiation info/#65281" "EC point formats/#11" "session ticket/#35" "heartbeat/#15" "next protocol/#13172" "application layer protocol negotiation/#16"

https://hg.nginx.org certificate error ?

Hi when I try to clone njs repo I am getting the error below hg clone https://hg.nginx.org/njs/ abort: hg.nginx.org certificate error: certificate is for *.nginx.com, nginx.com (configure hostfingerprint bd:90:5e:95:b4:51:d8:0b:b0:36:41:6f:99:a7:80:01:4e:cf:ee:c2 or use --insecure to connect

Re: Fwd: Encrypted SNI

Thanks Maxim. Guess we just need to wait :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,281512,281540#msg-281540 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: Fwd: Encrypted SNI

Nginx supports BoringSSL too and it already has ESNI support apparently https://www.theregister.co.uk/2018/07/17/encrypted_server_names/ Posted at Nginx Forum: https://forum.nginx.org/read.php?2,281512,281517#msg-281517 ___ nginx mailing list

WWW-Authenticate in 200 OK response

ls: true [2018-09-14 14:46:14.779] client_http_auth CRITICAL: GSSAPI failed! Best regards, George -- This message, and any attachments, is for the intended recipient(s) only, may contain information that is privileged, confidentia

Re: nginx reuseport duplicate listen options ?

correct meant vhost #1 'but if i had the 3 nginx vhosts where reuseport was used on vhost #3 instead of vhost #1, i get error ' Posted at Nginx Forum: https://forum.nginx.org/read.php?2,280710,280711#msg-280711 ___ nginx mailing list nginx@nginx.org

nginx reuseport duplicate listen options ?

I know that nginx reuseport is only usable per ip:port pair so I am confused about this error. I have 3 nginx vhosts vhost #1 server { listen 443 ssl http2 default_server backlog=2048 reuseport; } vhost #2 server { listen 80 default_server backlog=2048 reuseport fastopen=256; } vhost #3

Re: Nginx 1.13.9 HTTP/2 Server Push - non-compressed assets ?

thanks Ruslan just tested your committed fixes for this in master branch and working nicely https://community.centminmod.com/threads/hurray-http-2-server-push-for-nginx.11910/page-2#post-59602 :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,278481,278608#msg-278608

Re: Nginx 1.13.9 HTTP/2 Server Push - non-compressed assets ?

thanks Ruslan for the update appreciate all your work and looking forward to playing with HTTP/2 Push finally ! :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,278481,278582#msg-278582 ___ nginx mailing list nginx@nginx.org

Re: Nginx 1.13.9 HTTP/2 Server Push - non-compressed assets ?

Reported bug at https://trac.nginx.org/nginx/ticket/1478 Posted at Nginx Forum: https://forum.nginx.org/read.php?2,278481,278488#msg-278488 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Nginx 1.13.9 HTTP/2 Server Push - non-compressed assets ?

Hi compiled Nginx 1.13.9 from master branch to try out HTTP/2 Server Push but noticed the pushed assets loose their gzip compression and are served as non-compressed assets ? Is that as intended ? I posted my findings at

Re: Modsecurity dynamic module with Nginx-plus

yeah just use nginx open source free version if you need compile support - updated guide at https://www.nginx.com/blog/compiling-and-installing-modsecurity-for-open-source-nginx/ Posted at Nginx Forum: https://forum.nginx.org/read.php?2,276008,276018#msg-276018

how nginx decide which server block to use

Hi all, i am running nginx version: nginx/1.12.0.i got following server block config as below, all request match regular expression work well,but request to server s01.example.com return 404.what's wrong? i googled for a while,most of the article said,it first try to match literal string

Re: slice module issue if redirected origin and have have fist slice

suggestion how to workaround this tricky situation - I be very thankful. George On Tue, Jun 13, 2017 at 2:44 PM, Roman Arutyunyan <a...@nginx.com> wrote: > Hi George, > > On Mon, Jun 12, 2017 at 10:02:16AM +0300, George . wrote: > > ​​Hi, > > I've discove

slice module issue if redirected origin and have have fist slice

/view?usp=drive_web> ​) Problem appears in main branch and also nginx/1.12 ... and may be in all versions nginx version: nginx/1.13.2 built by gcc 4.9.2 (Debian 4.9.2-10) configure arguments: --prefix=/home/george/run/nginx_hg --with-http_slice_module nginx.conf user cdnuser cdnuser; worker_

Re: DTLS patches

thanks Vladimir :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,274289,274312#msg-274312 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: DTLS patches

thanks for sharing. Is it necessary to compile with --with-debug ? Posted at Nginx Forum: https://forum.nginx.org/read.php?2,274289,274299#msg-274299 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

nginx 1.11.12 + nginScript = failed to restart nginx server

Nginx compiles successfully with nginScript as a dynamic module. nginx -V nginx version: nginx/1.11.12 built by clang 3.4.2 (tags/RELEASE_34/dot2-final) built with LibreSSL 2.4.5 TLS SNI support enabled configure arguments: --with-ld-opt='-lrt -ljemalloc -Wl,-z,relro -Wl,-rpath,/usr/local/lib'

Re: coredump in 1.10.3

13 March 2017 15:24:46 George . wrote: > > Hi Valentin, Sorry, I've sent the mail incidentally before I complete it > ;) > > > > > > ssl_proxy_cores # ./nginx -V > > nginx version: nginx/1.10.3 > > built by gcc 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) &g

Re: coredump in 1.10.3

race the core dump. > > > Thomas > > > > *Sent from my iPhone. Please excuse any typos, as they are likely to > happen by accident.* > > On Mar 13, 2017, at 09:24, George . <geo...@ucdn.com> wrote: > > > Hi Valentin, Sorry, I've sent the mail incidentally bef

Re: coredump in 1.10.3

gt; > On Mon, Mar 13, 2017 at 03:06:17PM +0200, George . wrote: > > > Hi all, > > > > We've found two different coredumps in production machines running 1.10.3 > > handing ssl and http v2 traffic. > > > > Here is the backtrace of version compiles with -O

Re: coredump in 1.10.3

} } # other equivalent server blocks # . # . # . # . } On Mon, Mar 13, 2017 at 3:17 PM, Valentin V. Bartenev <vb...@nginx.com> wrote: > On Monday 13 March 2017 15:06:17 George . wrote: > > Hi all, > > > > We've found two different cor

Re: nginx-1.11.8

thanks Maxim working nicely here ! Posted at Nginx Forum: https://forum.nginx.org/read.php?2,271747,271754#msg-271754 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: nginx-1.11.6

Yeah some other nginx modules by OpenResty ran into 1.11.6 changes * https://github.com/openresty/redis2-nginx-module/issues/41 * https://github.com/openresty/memc-nginx-module/issues/26 the workarounds * https://github.com/openresty/redis2-nginx-module/pull/42 *

Re: Bloking Bad bots

I use nginx maps which depending on user agent either block, rate limit or whitelist https://community.centminmod.com/threads/blocking-bad-or-aggressive-bots.6433/ as the list gets large nginx maps just make it easier to manage Posted at Nginx Forum:

multiple php-fpm pool upstream alternating 503 & 502 errors

Was wondering if anyone could shed some light on this issue I am experiencing only with multiple php-fpm pool setups but not with single php-fpm pool. The issue is when a forum software like Xenforo or Invision board uses their native forum close option to turn off the forums for guests but still

Re: freeing buffers after sending them

THREADS version)? On Wed, Oct 12, 2016 at 2:30 PM, Valentin V. Bartenev <vb...@nginx.com> wrote: > On Wednesday 12 October 2016 13:22:08 George . wrote: > > Hi all, > > > > What do you think about freeing buffers after being sent by send_chain? > > Because we h

freeing buffers after sending them

Hi all, What do you think about freeing buffers after being sent by send_chain? Because we have a special case were we use 4 megabyte buffer instead of nginx default 8 * 8 K and we found that these buffers are actually freed after request had been finished, so if there hundreds of slow downstream

Re: nginScript + nginx 1.11.4, js_run unknown directive ?

Hi Igor thanks for the clarification. Looking forward to updated examples/wiki for nginScript :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,269548,269559#msg-269559 ___ nginx mailing list nginx@nginx.org

Re: nginScript + nginx 1.11.4, js_run unknown directive ?

and examples in wiki for nginxScript for js_run https://www.nginx.com/resources/wiki/nginScript/#section-1-overview Posted at Nginx Forum: https://forum.nginx.org/read.php?2,269548,269552#msg-269552 ___ nginx mailing list nginx@nginx.org

Re: nginScript + nginx 1.11.4, js_run unknown directive ?

even location /njs { js_run " var res; res = $r.response; res.status = 200; res.send('Hello World!'); res.finish(); "; } gives an error nginx -t nginx: [emerg] unknown directive "js_run" in /usr/local/nginx/conf/conf.d/virtual.conf:36 nginx:

Re: nginScript + nginx 1.11.4, js_run unknown directive ?

sorry i meant from old example readme at http://hg.nginx.org/njs/file/11d4d66851ed/README Posted at Nginx Forum: https://forum.nginx.org/read.php?2,269548,269550#msg-269550 ___ nginx mailing list nginx@nginx.org

nginScript + nginx 1.11.4, js_run unknown directive ?

Tried compiling nginScript with nginx 1.11.4 as a dynamic module and the README github example at https://github.com/nginx/njs/blob/master/README gives me js_run unknown directive so looks like maybe didn't install correctly ? CentOS 7.2 64bit nginx -V nginx version: nginx/1.11.4 built by gcc

Re: pcre.org down?

yeah ran into the same problem and still seems to be down right now Posted at Nginx Forum: https://forum.nginx.org/read.php?2,269359,269379#msg-269379 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: nginx-1.11.3

thanks Maxim works now :) cat /usr/local/nginx/conf/dynamic-modules.conf load_module "modules/ngx_http_image_filter_module.so"; load_module "modules/ngx_http_fancyindex_module.so"; load_module "modules/ngx_stream_module.so"; load_module "modules/ngx_stream_geoip_module.so"; load_module

Re: nginx-1.11.3

trying to enable ngx_stream_geoip_module as a dynamic module and getting this error ONLY on SOME servers and not others all compiled with same settings ? nginx -t nginx: [emerg] dlopen() "/usr/local/nginx/modules/ngx_stream_geoip_module.so" failed

Re: nginx-1.11.0

nice RSA + ECDSA certs support ! what's the recommended way to setup HTTP Public Key Pinning with regards to dual SSL certificates ? Posted at Nginx Forum: https://forum.nginx.org/read.php?2,267113,267124#msg-267124 ___ nginx mailing list

Re: [ANN] OpenResty 1.9.7.4 released

cheers agentzh thanks for that workaround for LibreSSL and ssl_certificiate_by_lua* incompatibility :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,265422,265450#msg-265450 ___ nginx mailing list nginx@nginx.org

Re: nginx-1.9.12

thanks I switched back to OpenSSL for now :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,264770,264794#msg-264794 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: nginx-1.9.12

Thanks Maxim and Nginx ! But no love for LibreSSL users as Nginx 1.9.12 seems to broken compilation against LibreSSL 2.2.6 for me https://trac.nginx.org/nginx/ticket/908#ticket ? Posted at Nginx Forum: https://forum.nginx.org/read.php?2,264770,264780#msg-264780

Nginx HTTP/2 server push support ?

Curious if anyone has heard or knows if or when Nginx HTTP/2 support will add server push https://http2.github.io/faq/#how-can-i-use-http2-server-push ? Posted at Nginx Forum: https://forum.nginx.org/read.php?2,264252,264252#msg-264252 ___ nginx

Re: nginx-1.9.10

Thanks updated to 1.9.10 fine with ngx_brotli + ngx_pagespeed 1.10 branch :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,264158,264187#msg-264187 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: [ANNOUNCE] ngx_brotli

cheers Piotr :) Posted at Nginx Forum: https://forum.nginx.org/read.php?2,262088,262254#msg-262254 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: [ANNOUNCE] ngx_brotli

and Firefox 43 dev edition as they don't support Brotli so I am assuming Firefox 44 + brotli is what is breaking ngx_pagespeed ? cheers George Posted at Nginx Forum: http://forum.nginx.org/read.php?2,262088,262190#msg-262190 ___ nginx mailing list

Re: [ANNOUNCE] ngx_brotli

thanks Piotr for the clarification definitely going to give ngx_brotli a spin :D Posted at Nginx Forum: http://forum.nginx.org/read.php?2,262088,262189#msg-262189 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: [ANNOUNCE] ngx_brotli

interesting thanks for sharing :) so how does this interact or conflict with gzip static/gzip ? do we need to turn off gzip/gzip static in nginx to use brotli or can both be enabled ? Posted at Nginx Forum: http://forum.nginx.org/read.php?2,262088,262096#msg-262096

Re: http2

It's already slated for Nginx 1.9.5 community/free edition :) Although I have been playing with HTTP/2 patches since Nginx 1.9.3 :D Posted at Nginx Forum: http://forum.nginx.org/read.php?2,261669,261676#msg-261676 ___ nginx mailing list

Re: wrong $bytes_sent on nginx-1.8.0 if aio threads is enabled

Hi all, I'd like to ask if there are plans somebody to fix the issue with wrong $bytes_sent in aio threads mode. If no, is there a chance to get some hit or direction, so I can try fix it myself and contribute to better and bug free nginx? Thanks in advance, George On Fri, May 15, 2015 at 11

Re: Nginx LibreSSL and BoringSSL alternative to OpenSSL ?

Tested fine with ECC 256 bit and RSA 2048 bit SSL and chacha20_poly1305 https://community.centminmod.com/threads/nginx-and-libressl-alternative-to-openssl.3146/ :) Posted at Nginx Forum: http://forum.nginx.org/read.php?2,259325,259333#msg-259333 ___

Re: Nginx LibreSSL and BoringSSL alternative to OpenSSL ?

thanks seems with LibreSSL 2.1.6 no longer need the steps for creating .openssl/lib and copying files to that directory and symlink to make it work seems it works on Nginx 1.9.1 with LibreSSL 2.1.6 sweet ! nginx -V nginx version: nginx/1.9.1 built by gcc 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC)

Nginx LibreSSL and BoringSSL alternative to OpenSSL ?

on CentOS/Redhat ? Any issues that needed working around or any features lost ? e.g. BoringSSL and OSCP stapling support etc ? Recommended steps for compilation with Nginx ? thanks George Posted at Nginx Forum: http://forum.nginx.org/read.php?2,259325,259325#msg-259325

Re: Nginx virtual host traffic status module

/nginx-module-vts/issues/13 cheers George Posted at Nginx Forum: http://forum.nginx.org/read.php?2,256699,259274#msg-259274 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

wrong $bytes_sent on nginx-1.8.0 if aio threads is enabled

/test HTTP/1.1 170 GET /test HTTP/1.1 10170 GET /test HTTP/1.1 10170 GET /test HTTP/1.1 . . Best regards, George nginx.conf Description: Binary data my_configure Description: Binary data #!/usr/bin/env python import os import time import urllib2 import threading from BaseHTTPServer import

Re: Google dumps SPDY in favour of HTTP/2, any plans for nginx?

thanks Sarah dug deeper and apparently those nginx reported header sites were behind Google Pagespeed's service so that must of been why HTTP/2 was reported Posted at Nginx Forum: http://forum.nginx.org/read.php?2,256561,257778#msg-257778 ___ nginx

native variable for one level above $document_root ?

or /home/username2 ? thanks George Posted at Nginx Forum: http://forum.nginx.org/read.php?2,257127,257127#msg-257127 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: NGINX using 100% of the server CPU when testing with Blitz.io

maybe switch to using Wordpress Super Cache ? handled blitz.io 8000 user stress test fine with Nginx 1.7.7, PHP-FPM 7.0.0-dev, MariaDB 10.0.x and CentOS 7.0 = 237 million hits/day on 2GB DigitalOcean KVM VPS server

Re: Use of boringssl equal-preference cipher groups with nginx

thanks Alex so what's the updated way to compile Nginx against BoringSSL ? Posted at Nginx Forum: http://forum.nginx.org/read.php?2,252640,252779#msg-252779 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: Nginx + boringSSL

Thanks for sharing :) So SPDY/3.1 SSL works ? Posted at Nginx Forum: http://forum.nginx.org/read.php?2,251740,251748#msg-251748 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Re: Nginx 1.7.0 failed make with Phusion Passenger ?

thanks for the reply and fix :) Posted at Nginx Forum: http://forum.nginx.org/read.php?2,249586,249595#msg-249595 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Nginx 1.7.0 failed make with Phusion Passenger ?

Anyone experience this problem ? I have Nginx 1.5.13 working fine with Phusion Passenger 4.0.37 source compile. But trying to update Nginx from 1.5.13 to 1.7.0 fails at make stage. I tried both Phusion Passenger 4.0.37 and 4.0.41 and it fails. Working Nginx 1.5.13 configuration nginx -V nginx

Re: Nginx 1.7.0 failed make with Phusion Passenger ?

grep -C10 zero_in_uri /usr/local/rvm/gems/ruby-2.1.1/gems/passenger-4.0.41/ext/nginx/StaticContentHandler.c if (!(r-method (NGX_HTTP_GET|NGX_HTTP_HEAD|NGX_HTTP_POST))) { return NGX_HTTP_NOT_ALLOWED; } if (r-uri.data[r-uri.len - 1] == '/') { return NGX_DECLINED; }

Re: Guide on switching from distro-provided nginx to nginx built from source?

Maybe this will help http://www.howtoforge.com/using-ngx_pagespeed-with-nginx-on-debian-wheezy and http://www.howtoforge.com/using-ngx_pagespeed-with-nginx-on-debian-jessie-testing - right up your alley for Debian distro :) I personally use CentOS build via Centmin Mod Nginx as it already

help: How to cache video in nginx when dynamic link request

configure? Thanks Regards George yuan ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx

Turn off Nginx SPDY ?

I want to test non-SPDY vs SPDY performance for Nginx and I have Nginx compiled with SPDY support and it's enabled by adding to listen directive the spdy option as per http://nginx.org/en/docs/http/ngx_http_spdy_module.html. I thought that omitting the spdy option would disable SPDY temporarily ?

Re: Turn off Nginx SPDY ?

I see i believe my problem is #2 as i have another vhost with spdy enabled on same addr:port pairing ! Thanks Valentin :) Posted at Nginx Forum: http://forum.nginx.org/read.php?2,242665,242668#msg-242668 ___ nginx mailing list nginx@nginx.org

Re: Announcing ngx_pagespeed beta 1.5.27.1

Yup http://ngxpagespeed.com/ isn't accessible at all from my end either. Posted at Nginx Forum: http://forum.nginx.org/read.php?2,238650,238656#msg-238656 ___ nginx mailing list nginx@nginx.org http://mailman.nginx.org/mailman/listinfo/nginx