Hello, Tommy, I just bought fantastic red 1984 Honda CB750SC Nighthawk. It
is absolutely wonderfull, except it misses original turn signals. :( It
happens that I live in small country in Europe and we have very limited
possibilities to find such rare parts here. I wonder if I could ask you to
My GUESS is the carbs are the same. If you are not in a hurry, pull the carbs
and look at the size of the Jets. If that is the same, then a safe bet they
are identical. FWIW, I also checked CMSNL (Holland) and they also do not have
info for the 750S. You may try emailing them to ask. I
On Tuesday, November 29, 2016 at 5:00:02 PM UTC-7, Tommy Hill wrote:
>
> And they were only made '84-86. I may have signals if yours are not
> repairable.
Thanks Tommy! I'll keep that in mind. I do actually have two new complete
rear signal light assemblies. I haven't even tried sourcing
Thanks for the reply Kyle.
That's my problem. I cannot find any parts listings for my specific bike to
compare against others. What I tried to say in my first post but screwed up
my wording was, that I'm assuming I cannot source parts information because
my particular bike was not sold in the
And they were only made '84-86. I may have signals if yours are not repairable.
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Welcome to the group. As far as I know the carbs are the same between the
700S and 750S but I can't point to anything official. The best thing to do
would be to do a parts lookup between the two bikes and see if the carb
parts you need have the same part number.
-Kyle
On Tue, Nov 29, 2016 at
Hello All,
My name is Kenny and I am glad to see this discussion site up here. I am a
recently new owner to an 84 750s with 6,000 kms on it and I had a few questions
about it before I started to tear it apart and make it into my little project
bike.
Questions:
1) My hand
Hi,
Has anyone out there made the same mistake as I did and pressure washed
their bike? since I did this the bike won't run smooth and backfires all the
time out of both mufflers. I've spent the last two weeks drying it out, cleaned
the carbs, etc. now I don't know what else to try, I just
