Thanks
On Thu, Aug 20, 2020 at 8:09 AM James Tohara wrote:
> I use NGK Iridium-IX Spark Plug DPR8EIX-9 instead.
>
> On Thursday, July 9, 2020 at 6:19:39 PM UTC-7 gbg...@gmail.com wrote:
>
>> Thanks to all.
>>
>> What is the life expectancy on the ngk plugs so I have some idea when to
>> check
I use NGK Iridium-IX Spark Plug DPR8EIX-9 instead.
On Thursday, July 9, 2020 at 6:19:39 PM UTC-7 gbg...@gmail.com wrote:
> Thanks to all.
>
> What is the life expectancy on the ngk plugs so I have some idea when to
> check or change them?
>
> On Thu, Jul 9, 2020 at 8:28 PM Francisco Gomez
Thanks to all.
What is the life expectancy on the ngk plugs so I have some idea when to
check or change them?
On Thu, Jul 9, 2020 at 8:28 PM Francisco Gomez
wrote:
> Hello Nighthawk, hello Mark, regarding to your question about Spark plug,
> sorry but in this country there are so much options
Hello Nighthawk, hello Mark, regarding to your question about Spark plug,
sorry but in this country there are so much options and regarding air
filter I could recommend you to get K filter Wich is better than original
and it can be wasihes and reinstall many times, I use it in my Nighthawk
from
Yep NGK for many thousands more than 4K
On Thu, Jul 9, 2020 at 5:26 PM gary glick wrote:
> The book calls for changing plugs @ 4,000 miles. Plugs in the book are
> either ND x24epr or NGK dpr8ea-9. Being it is now 30 years later are there
> recommended plugs that can go longer than 4,000 miles?
Stay with NGK, can't go wrong. Don't know about air filter.
Dave
On Thu, 9 Jul 2020 at 18:26, gary glick wrote:
> The book calls for changing plugs @ 4,000 miles. Plugs in the book are
> either ND x24epr or NGK dpr8ea-9. Being it is now 30 years later are there
> recommended plugs that can go
The book calls for changing plugs @ 4,000 miles. Plugs in the book are
either ND x24epr or NGK dpr8ea-9. Being it is now 30 years later are there
recommended plugs that can go longer than 4,000 miles? If so what are the
recommended plugs for standard riding? Is there a recommended brand of air
Yes, I recommend spark plus
On Thu, Jun 13, 2019 at 3:28 PM 'nick.tamps...@btinternet.com' via
Nighthawk Motorcycle Lovers! wrote:
> Any recommendations for spark plugs for a 1996 CB750F2 Nighthawk.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk
NGK is the only brand I use for these bikes.
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to nighthawk_lovers+unsubscr...@googlegroups.com.
To
Any recommendations for spark plugs for a 1996 CB750F2 Nighthawk.
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Many fish will go shallow to herd shad against the shoreline due to lack of
visibility. It's like a fast wide receiver being pinned against the sideline by
a good defensive back.
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 7:10 PM, Darin Hatton wrote:
The fish we are
The fish we are catching are staying 35 to 45 feet deep at the mouth of a
pretty good size cove. They are staging there on schools of shad waiting
for the magic water temp to go shallower and spawn. They won't go anywhere
I don't think. I just absolutely hate fishing muddy water!
On Fri, Apr 19,
Wow that's not good. If it goes from stained to muddy do you know where the
fish go?
On Fri, Apr 19, 2019, 4:57 PM Darin Hatton wrote:
> Going to re-torque after a hundred miles or so. Book calls for 9-13 ftlbs.
> I went with 11. I try to go for middle of the road if they give a
> difference
Going to re-torque after a hundred miles or so. Book calls for 9-13 ftlbs.
I went with 11. I try to go for middle of the road if they give a
difference like that.
Was gonna try to hit crappie hole Sunday but after 3 " of rain I'm not so
sure : (
On Fri, Apr 19, 2019, 5:52 PM
Nice torque wrench!
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 4:52 PM, bobshel...@gmail.com
wrote: I know you knew that just harassing you a little.
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 4:28 PM, Darin Hatton wrote:
I would have to agree : )
On
I know you knew that just harassing you a little.
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 4:28 PM, Darin Hatton wrote:
I would have to agree : )
On Fri, Apr 19, 2019, 5:26 PM bobshel...@gmail.com wrote:
If you torque to spec it shouldn't loosen.
Sent from Yahoo Mail on
One of my favorite tools and I use as often as I can. Bought it to do head
gaskets on my gl650i silverwing
On Fri, Apr 19, 2019, 5:30 PM Darin Hatton wrote:
> I would have to agree : )
>
> On Fri, Apr 19, 2019, 5:26 PM bobshel...@gmail.com
> wrote:
>
>> If you torque to spec it shouldn't
I would have to agree : )
On Fri, Apr 19, 2019, 5:26 PM bobshel...@gmail.com
wrote:
> If you torque to spec it shouldn't loosen.
>
> Sent from Yahoo Mail on Android
>
If you torque to spec it shouldn't loosen.
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 4:23 PM, Darin Hatton wrote:
Yes. That is cylinder #4. It was no more than hand tight when I took it out.
Guess I should have retightened after running them a bit
On Fri, Apr 19, 2019,
Yes. That is cylinder #4. It was no more than hand tight when I took it
out. Guess I should have retightened after running them a bit
On Fri, Apr 19, 2019, 5:20 PM bobshel...@gmail.com
wrote:
> Do you see the darker color under the electrode on the far plug?
>
> Sent from Yahoo Mail on Android
Do you see the darker color under the electrode on the far plug?
Sent from Yahoo Mail on Android
On Fri, Apr 19, 2019 at 4:01 PM, Darin Hatton wrote:
Pulled the plugs on my 700s after about 500 miles on them. All seams well but
would like a more experienced set of eyes to look at them.
Thanks kiwi. Was mostly concerned with the #1 cylinder as it was the one
with low compression, stuck piston rings and not firing. Think I'm going
to give synchronizing a go. Cut out me a little at higher rpm yesterday
when I was making my buddy ring out his 1200 harley
On Fri, Apr 19, 2019, 5:07
Looks a little lean but if runs and idles like it should, no hesitation, I
would leave well enough alone
On Sat, Apr 20, 2019 at 9:01 AM Darin Hatton wrote:
> Pulled the plugs on my 700s after about 500 miles on them. All seams well
> but would like a more experienced set of eyes to look at
I put them in dry as well.
Allen Thomas
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post
Ok. Will do
Sent from my iPhone
> On Feb 16, 2016, at 7:38 PM, Tommy Hill wrote:
>
> Never, just torque correctly. But if you do, don't get any on the tips.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle
Never, just torque correctly. But if you do, don't get any on the tips.
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Ever use bronze anti-sieze when installing?
Sent from my iPhone
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
m my Verizon Wireless 4G LTE smartphone
>
>
> Original message
> From: Tommy Hill <ominbo...@gmail.com>
> Date: 12/21/2015 8:39 PM (GMT-05:00)
> To: Nighthawk Motorcycle Lovers! <nighthawk_lovers@googlegroups.com>
> Subject: Re: [Nighthawk Lovers] Sp
roups.com>
Subject: Re: [Nighthawk Lovers] Spark plugs
That's what SHE said!
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to nig
Regular 18 mm deep well socket works fine
On Monday, December 21, 2015, David Basinski wrote:
>
>
> On Saturday, December 19, 2015 at 4:39:59 PM UTC-6, Ross M. Jamison wrote:
>>
>> Nighthawks,
>>
>> Got my 750 to run on cylinders 1,2&3 installing the used coil for 1 & 4.
That's what SHE said!
--
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send
I wanted to rattle it off here, then realized I don't actually know the
socket size. I imagine it's metric, but spark plugs shouldn't be torqued so
tightly that a standard equivalent would round it off.
On Dec 19, 2015 5:39 PM, "'Ross M. Jamison' via Nighthawk Motorcycle
Lovers!"
Nighthawks,
Got my 750 to run on cylinders 1,2&3 installing the used coil for 1 & 4. Just
realized, I've never pulled plugs. What size socket? Neither of my standard
automotive sockets it. Do I have to buy a special?
Sent from my iPhone
--
You received this message because you are subscribed
..
Allen Thomas
On Dec 19, 2015 6:05 PM, "'Ross M. Jamison' via Nighthawk Motorcycle
Lovers!" wrote:
> Just remembered. My oem tool kit. I'll look tomorrow
>
> Sent from my iPhone
>
> > On Dec 19, 2015, at 4:39 PM, 'Ross M. Jamison' via Nighthawk Motorcycle
>
Just remembered. My oem tool kit. I'll look tomorrow
Sent from my iPhone
> On Dec 19, 2015, at 4:39 PM, 'Ross M. Jamison' via Nighthawk Motorcycle
> Lovers! wrote:
>
> Nighthawks,
>
> Got my 750 to run on cylinders 1,2&3 installing the used coil for 1 & 4.
Factory specs call for NGK DPR 8EA-9 for my '95 750.
My local NAPA stocks NGK DP(no R) plugs. Parts guy says the R
designates resistor plugs, which squelch radio noise and should not
be neccessary for use on a motorcycle.
I'm a technodolt when it comes to things electrical/electronic. Can
36 matches
Mail list logo