OpenFlow version 2.02 doesn't mean anything to me. What kind of switches are
you using?
What IP address are you using with dpctl? The switch? In general, switches
make active connections (they initiate a connection to the controller/NOX), so
it's not listening on port 6633. Sometimes
This sounds like a switch configuration issue; you might try whatever support
channels HP provides.
Is NOX configured to listen for connections on whatever port you set the
switches to connect to?
-- Murphy
On Feb 28, 2012, at 3:36 PM, Elias Marti Paz-Rudolph wrote:
I am using HP ProCurve
In order to configure the listener port on the HP you should do something like:
openflow vlan listener ptcp:port
Then you should be able to dpctl the switch. Though a word of warning,
now everyone else can too :P .
Aaron
On Tue, Feb 28, 2012 at 7:05 PM, Murphy McCauley jam...@nau.edu wrote:
To: Elias Marti Paz-Rudolph
Cc: nox dev
Subject: Re: [nox-dev] Help with NOX to OpenFlow messages
In order to configure the listener port on the HP you should do something
like:
openflow vlan listener ptcp:port
Then you should be able to dpctl the switch. Though a word of warning,
now