hi all,
where can i find configuration files in NS-2 where all the battery parameters
are specified?by battery parameters i mean the kind of wireless card to be
used,the transmisson power ,the receptions power and other battery-related
parameters.
hi all,
when i run my tcl script i get an error:"wrong node routing agent"
what could possible be wrong??please help!
Hi all,
i want to simulate two cell each has a base station .If there is one mobile
station in first cell,when mobile station move from first cell and at the
boundary between these two cell shoud send message to first cell for hand off
. please help me to write this secnario.
many thanks
Hi all,
i want to simulate two cell each has a base station and there is one mobile
station in one of cell,when mobile station move from first cell and at the
boundary between these two cell shoud send message to first cell for hand off
. please help me to write this secnario.
many thanks
Hi all,
i want to simulate two cell each has a base station and there is one mobile
station in one of cell,when mobile station move from first cell and at the
boundary between these two cell shoud send message to first cell for hand off
. please help me to write this secnario.
many thanks
hi guys
i write a file in window's using wordpad. and when i try to open that in linux
gedit it gives me following error
"gedit was not able to automatically detect the character coding. Please, check
that you are not trying to open a binary file and try again selecting a
character coding i
Hi,
I have a question about NS-2's 802.11 modeling (or lack there off) of
SINR/SNR. I've been going through wireless-phy.cc and as far as I can
tell,there's no SINR modeling at all. To receive a packet successfully,
the receiving side checks if the received signal power strength is
greater than b
Hello,
I've been trying to install ns-allinone-2.30 on my system (Linux Ubuntu
6.10 with 2.6.17-11-38, Xorg 7.1.1) where the X11 headers (especially
Xlib.h from the libx11-dev package) get installed in /usr/include/X11.
Unfortunately, the installation script doesn't seem to consider this
director
Tim,
Would it be possible to post a pointer to your 802.15.4 code?
Thanks,
Scott
On 3/7/07, Tim Allemeersch <[EMAIL PROTECTED]> wrote:
>
> Hi all,
>
> This is indeed a bug in the 802.15.4 ns-2 module. I have had this
> problem too. Multiple times, a node would just stay in the 'busy
> channel'
can anyone please tell me where i can find the sizes of different types of
packets. example tcp, udp, ack, message, rtproto etc.
in particular, when im manually duplicating a 60 byte tcp pkt and forcibly
sending it to a non recipient node and then dropping it at that node's LL
(link layer), th
hi
can anyone please tell me where i can find the implementation (source code)
of the Tcl_GlobalEval() function, so that i can know which c++ functions it
calls and in which order.
NOTE: the Tcl_GlobalEval() function is executed by the eval() function in
class Tcl.
thanks in advance
email: [EMA
Hi everyone
I am looking for a traffic generator for VoIP with codec G.729 with silence
suppression. I am tryin to build a codec with G.729 silence suppression for
NS2. Can anyone suggest me if it is already there( I am 99% sure we dont
have) but if someone is working on it or have built for thei
Hi,
I am a postgraduate in Algeria and I am using ns2 to make some research of ad
hoc multicast.
I downloaded the ns wireless extension for multicast from the monarch =
project site. I have exactly downloaded the file (ns-2.1b8-mcast.tar.gz).
How would i integerate this in ns-allinone. I am work
Hi all,
I have read articles speaking about the available bandwidth of link and about
delay of this link in the ad hoc networks (MANETs).
But I have not found any explanation on the way of calculating them under NS.
Please help me. How to calculate them under NS2?
waiting for your
Thanks to the guys for helping me.
In most sample, I only find output 'trace-all'. How can I customize trace file
(out.tr), so that the output file are only print the TCP and UDP packet. How
does this trace file are generated when we use syntax like:
set f [open out.tr w]
$ns trace-all $f
Hi ns-users,
Does anyone knows if it is possible to use the Delaybox in a Wless-Wired
Scenario?
Should I define the Hierarchical Addresses in the same way as using normal
ns-node?
I'm getting error after making the necessary changes at my Tcl script...
Thanks in Advance!
Bruno
-- Forwarded message --
From: Vijay Kumar c <[EMAIL PROTECTED]>
Date: Mar 7, 2007 6:15 PM
Subject: Fwd: Urgent help for wireless scripts
To: [EMAIL PROTECTED]
-- Forwarded message --
From: Vijay Kumar c <[EMAIL PROTECTED]>
Date: Mar 7, 2007 6:15 PM
Subject: Urgen
-- Forwarded message --
From: Vijay Kumar c <[EMAIL PROTECTED]>
Date: Mar 7, 2007 6:15 PM
Subject: Urgent help for wireless scripts
To: [EMAIL PROTECTED]
Hi Everyone,
Plz give me some details regarding wireless scripts using tcl for ns2 plz
try to give some sample scripts other t
Hi Everyone,
Plz give me some details regarding wireless scripts using tcl for ns2 plz
try to give some sample scripts other than Marc Grieg's Tutorial scripts
also i would like to know some website links so that i can improve my
programming skills in Tcl language.
My problem statement is also g
If test-all-mwnode pass, the example should work as well.
Ensure you use the latest version of the patch and ensure you have
properly _reinstall_ ns after applying the patch
(configure, make distclean, configure, make).
Then test for example:
$ns
% new Channel/Wireless
If you have applied the
Where can i get full sample script of AODV / DSR that i can implement / test?
The script in the directory are just part of the implementation.
-
Don't get soaked. Take a quick peek at the forecast
with theYahoo! Search weather shortcut.
Hi all,
I have installed MW-Node patch in ns-2.30(Kubuntu 6.10):
|patch -p1.
./configure
||test-all-mwnode| is executable and working but when I execute:
ns mwnode-ex.tcl
the result is:
invalid command name "Channel/Wireless"
while executing
"Channel/Wireless create _o14 "
invoked fro
i tried one of the example wireless programs simplewireless.tcl but my
output trace file is empty,even when NAM is working.
is there any installation problem?can anybody help me with this?
--
[EMAIL PROTECTED]
--
Hi all,
This is indeed a bug in the 802.15.4 ns-2 module. I have had this
problem too. Multiple times, a node would just stay in the 'busy
channel' mode, and could therefore not send its data. Anyway, I solved
it this way:
Have a cca at the first symbol. (CSH.start(1/getRate('s'));)
If the cha
24 matches
Mail list logo