Re: [ns] About wireless cards specifications simulation

Hi, First of all thanks alot for your fast response. You have said that : "To answer your question: NO, it is absolutely not realistic to deduce from a result of 150m transmission range to be in an indoor scenario." Do you mean that I cannot assume an indoor range to be 150m,

[ns] Successful Leopard install was Re: can't install otcl-1.13 on Mac OS X 10.5.2?

. That also worked for configuring nam-1.13, but that failed at the linker stage bleating Undefined symbols: "__TkCreateXEventSource", referenced from: _TkpInit in tkUnixInit.o so I grabbed nam-1-20080222.tar, which failed with the same linker error. (I was using the available Tcl

Re: [ns] About wireless cards specifications simulation

Hi, Gabrial Monty schrieb: > I have to simulate an infrastructured wireless network behavior using > different wireless cards specifications. I want to test the network > performance using 802.11a cards with high transmit power level (not less than > 600 mW). I have choosen the XtremeRange5

[ns] Realistic or not, your help is needed

Hi, is realistic to assume that thw transmit power level is 400/500/600 mW with Tx range = 150m for 802.11a based networks? please I need answer for this question please help - Looking for last minute shopping deals? Find them fast with

[ns] About wireless cards specifications simulation

Dear all, I have to simulate an infrastructured wireless network behavior using different wireless cards specifications. I want to test the network performance using 802.11a cards with high transmit power level (not less than 600 mW). I have choosen the XtremeRange5 card but what I have

[ns] AODV re-routing

Hello, I want to know if there is some code or ns command, to ask a new routing, i mean, to update the AODV routing tables. Because sometimes it doesn't work. Cheers... Jamal Toutouh El Alamin NEO Group - Networking and Emerging Optimization Un

[ns] DSR routing protocol problem

Hello All, I have a problem when I try to simulate a wireless network, just when I use DSR routing protocol. When I use others I have not any problem. The problem is that during the simulation there is an EXCEPTION with the next message: 7 [main] ns 1880 _cygtls::handle_exceptions: Exception:

[ns] [ binding variables

Jamal Toutouh El Alamin NEO Group - Networking and Emerging Optimization University of Malaga Phone: (+34) 952 13 33 03 Addres: E.T.S Ingenieria Infor

[ns] İLT: how to change the speed of node whil e randomly moving

Hello all ns-users, I have sent the e-mail below, but couldn't get any response. If anyone has the answer of my question, it will be appreciated. Regards, Semra Kimden: Semra YILMAZ Gönderilmiş: Paz 17.02.2008 18:21 Kime: ns-users@ISI.EDU Konu: how to change the

[ns] Nam: Packets cannot be transmitted over dynamically created links

I'm using nam 1.11 under Windows XP / Cygwin 1.5.25. In my application, I need to create nodes and links dynamically, i.e. after the initialization phase. This feature was introduced in nam 1.6. Creating nodes and links dynamically does work, but it is not possible to visualize the transmission of

[ns] Reserved flow has longer delay than BestEffort flow on RSVP/ns???

Hi All, I've installed RSVP/ns and it runs well with examples in RSVP/ns document by Marc Greis.. I've ran ns~\tcl\ex\rsvp\rsvp_distinct.tcl successfully, and got the same data as Figure 5( Measurements for distinct reservations) in RSVP/ns document. Then,I added trace-ralated codes in rsvp_di