i only manage to find ZRP for an older version of NS (NS2.1b9), i'm currently
using allinone-2.34, how do i install the zrp in? i'm quite new to ns2 but i
need it for my final yr project, thanks!
--
View this message in context:
Hi, on the site tutorial u post, below there's a note: Add those files to
your cvsignore, respectively delete them from your patchfile after creating
it, just wondering where is this patchfile? thanks!
Volker Richter wrote:
Hello,
I'm using the eclipse IDE to make changes in the ns-2
Hi, im having the same problem as you now, did you manage to solve the
problem?
Albane Delos wrote:
Hi all,
I am currently trying to make ns-2.34 work in Eclipse Galileo. Without
Eclipse it works and compiles just fine but in Eclipse I have the
following
errors:
make all
i mean example for different implementation fo aodv protocol, can i use the
same tcl script to run it? or each tcl script is specially made for a
particular implementation of aodv? thanks =)
--
View this message in context:
num_nodes is set 25
invalid command name 25
while executing
$val(nn)
invoked from within
$ns_ node-config -adhocRouting $val(rp) \
-llType $val(ll) \
-macType $val(mac) \
-ifqType $val(ifq) \
-ifqLen $val(ifqlen) \
-antType $val(ant) \
-pr...
anyone knows whats wrong? thanks!
--
View
I manage to install zrp(made for ns2.19b) into my ns2.34 without any complie
errors but when i try the run the tcl script provide in its demo folder it
gives me the following errors:
ti...@tiong:~/demo$ ns demo1_rad2.tcl
num_nodes is set 22
(_o15 cmd line 1)
invoked from within
_o15
facing Segmentation fault when i run tcl script for zrp(2.19b) in ns2.34
anyone have a solution? thanks =)
--
View this message in context:
http://old.nabble.com/Segmentation-fault-while-running-zrp-tp28636923p28636923.html
Sent from the ns-users mailing list archive at Nabble.com.
the recv() does it process one packet at a time and the rest queuing up
outside? or at one time multiple packets can access the recv()? hope someone
can clear my doubts, thanks!
--
View this message in context:
://www.facebook.com/pages/Teerawat-Issariyakul/358240861417
http://twitter.com/T_Bear
http://www.t-issariyakul.blogspot.com
http://www.ece.ubc.ca/~teerawat
On 6/10/2010, tiongsquare tiongsqu...@hotmail.com wrote:
the recv() does it process one packet at a time and the rest queuing up
outside
not sure if is ns2 problem or c++ issue,
i did a function call testingprint(); somewhere else
int ff2 = 0;
void
Myprog::testingprint()
{
if(ff2 == 0){
#ifdef DEBUG
fprintf(stderr, I am from %d node TESTING \n, index);
#endif
printf(AT(%d) hello TESTING \n, index);
Is it possible to calculate the total number of packets sent out from a
mobile node in C++? i'm working on a routing protocol currently. thanks!
--
View this message in context:
http://old.nabble.com/total-number-of-packets-sent-out-from-a-mobile-node-in-C%2B%2B--tp29008550p29008550.html
Sent
i understand that mpr indeed helps to reduce the amount of broadcast messages
in the protocol(which uses it) point of view, but i thought mpr itself will
result in periodic sending of hello messages, wouldnt that in turn produce
more messages?
redundant messages avoided from sending by using
How can i calculate the no of data packets sent out from my routing protocol
node (c++)? thanks =)
--
View this message in context:
http://old.nabble.com/How-can-i-calculate-the-no-of-data-packets-sent-out-from-my-routing-protocol--tp29264794p29264794.html
Sent from the ns-users mailing list
during the execution it prompt me to enter the map file name, but which is
the map file in the directory??? thanks
--
View this message in context:
http://old.nabble.com/having-problem-running-important-tools-Manhattan-Mobility-Generator-for-ns2-tp29264960p29264960.html
Sent from the ns-users
i have try a few generators but alot can't configure much, i need one that
allows me to config max speed, min speed, safe distance, acceleration, no of
vert and hori grids. thanks!!!
--
View this message in context:
in ns2 own cbrgen which is used to gen traffic file, there is this parameter
seed: Seed to the RNG to generate a random traffic pattern. so what does
this seed means? what is Seed to the RNG to generate a random traffic
pattern? thanks!
--
View this message in context:
do i need to use a specific traffic pattern file made for the movement
scenario file i'm using? or both doesn't have relation with each other? my
movement scenario file is manhattan, so can i just use cbrgen in ns2 to gen
for the traffic part? thanks!
--
View this message in context:
Hi, i want to set my radio propagation range for each mobilenode to 225m and
the channel to operate at 2Mbps
1) for the channel bandwidth i read this the way to set it in the tcl script
Mac/802_11 set dataRate_ 2Mb
but do i need to set Phy/WirelessPhy set bandwidth_ 2Mb also? are they the
same
Is there anyway i could speed up my ns2 simulation? my simulation has 1000
nodes, 5000x5000 manhattan map and more..and the simulation taking hrs =.=,
hope there is a way to speed up because i need this script to test my
protocol and also do multiple simulations on other protocol to compare the
I got the following errors appearing on terminal when running through my nam,
does it mean i have to sort my scenario time in descending order? below are
2 scenario file, one got the error(bonnmotion) the other no error(important
tool). thanks!
Warning: Tracefile events are not sorted by time.
Cannot connect to existing nam instance. Starting a new one...
nam: Unable to open the file testing-out.nam
this nam file is 4.6GB size, does nam has problem opening large nam file?
because i thought initially is my nam program problem, but i try opening
small nam files and it works. anyone
how is it possible to obtain data pkts/sec traffic information from my
routing protocol? thanks!
--
View this message in context:
http://old.nabble.com/mobilenode-data-traffic-tp29303361p29303361.html
Sent from the ns-users mailing list archive at Nabble.com.
i have gnuplot installed and have some awk scripts
i need delivery ratio on my y axis and mobility speed on my x- axis(20 30 40
...80)
so it means i need a awk script which can take in mobility speed value as
input and output the delivery ratio for that speed? if yes, my problem now
is the
i'm stuck in my project of retrieve info from the traces and plot the graphs
for a fews days already.
need help in retrieving information from the trace file which i need it to
plot using gnuplot. Any help will be appreciated!!!
i need to plot delivery ratio - mobility speed,
average end-to-end
hi,
Solution:
In yr tcl script, include the following:
if { $val(rp) == “DSR” } {
set val(ifq)CMUPriQueue
} else {
set val(ifq)Queue/DropTail/PriQueue
}
http://cromagnonlife.wordpress.com/2010/08/08/solution-ns2-segmentation-fault-core-dumped-when-using-dsr/
sriram
hi,
Solution:
Hi,
In yr tcl script, include the following:
if { $val(rp) == “DSR” } {
set val(ifq)CMUPriQueue
} else {
set val(ifq)Queue/DropTail/PriQueue
}
http://cromagnonlife.wordpress.com/2010/08/08/solution-ns2-segmentation-fault-core-dumped-when-using-dsr/
visq
will like to share the solution with everyone =)
Solution:
In yr tcl script, include the following:
if { $val(rp) == “DSR” } {
set val(ifq)CMUPriQueue
} else {
set val(ifq)Queue/DropTail/PriQueue
}
hi all, im looking for awk scripts for avg end to end delay and total sent
packets(data + control) for my project which is due soon, any help will be
appreciated! :)
--
View this message in context:
hi thanks for replying, the one i need is for wireless new trace format.
Muhammad Faiz wrote:
On Mon, Aug 9, 2010 at 6:21 PM, tiongsquare tiongsqu...@hotmail.com
wrote:
hi all, im looking for awk scripts for avg end to end delay and total
sent
packets(data + control) for my
$ns_ use-newtrace
visq wrote:
How to obtain a new trace? is there any command that we need to append to
the tcl script?
On Mon, Aug 9, 2010 at 10:54 PM, tiongsquare
tiongsqu...@hotmail.comwrote:
hi thanks for replying, the one i need is for wireless new trace format.
Muhammad
hi guys really need help here, i been simulation dsr aodv by varying the
number of network load, then i calculated the end to end delay, however the
result isnt what i expected, it begins with high delay with lowest
trafficload, then it goes down and up again forming a U shape trend. how
could
31 matches
Mail list logo