can anyone please tell me why when i try to change the speed of a mobile node
in handover wifi-wimax then i compare pakct loss there is no changement in
number of dropped packets i change this line :$ns at $moveStart $iface1
setdest 600.0 1000.0 $moveSpeed and i change the value of move
Bonjoursvp j'ai essayé de changer le update intervall de DSDV in DSDSV.cc
NS2.30 alors j'ai changé cette valeur perup_ (15) puis j'ai recompilé NS2 :
./configure /make clean/ make donc lorsque j'ai essayé de voir l'effet de ce
changement sur le résultat de simulation j'ai remarqué que rien
hi how can i change the update intervall in NS2.30 for the DSDV routing
protocol .thank you
helloi'm working on vertical handover between wimax /wifi i used the MIH module
of NIST on NS2.30 ; when i try to change the routing protocole on the
wifi-wimax.tcl from DSDV to AODV i got this problem
At 5.232206 in 4.0.0 Handover2 received new prefix 3.0.0old address:
3.0.1,
. As an example, DHCP uses IP broadcast initially based
on
UDP67 / UDP68.
Regards,
Frank
On May 1, 2012, at 5:36 AM, Paulo Robson S. F. wrote:
Hi,
I want to broadcast a packet using an udp agent. I found some solutions
at
this maillist but
neither satisfactory.
I just
Hi,
I forgot to show this page:
http://www.math.unipd.it/~cpalazzi/fastbroadcast.html
what do you think of this broadcast agent?
Att
2012/5/2 Paulo Robson S. F. robson.paulo...@gmail.com
Hi guys, thanks for the feedback.
Alysson,
The Agent PBC is a broadcast but is only ping, I tested
Hi,
I want to broadcast a packet using an udp agent. I found some solutions at
this maillist but
neither satisfactory.
I just want to send broadcast packet from 1 node to another 2 nodes in his
range. My idea was
change the dst ip to -1 and dst port to 0 because i saw somewhere that is
the way
Would anyone happen to have ns-2 extensions/scripts for IEC61850 that
you could share?
Thanks,
Steve (www.research.ge.com/~bushsf)
(www.comsoc.org/nano)
I should have asked the broader question of whether there is a smart
grid ns-2 group or repository.
Thanks,
Steve
-Original Message-
From: Bush, Stephen F (GE, Research)
Sent: Friday, February 26, 2010 2:00 PM
To: 'ns-users@isi.edu'
Subject: ns-2 and IEC61850
Would anyone happen
Has anyone used NIST WIMAX with ns-2 version 2.33?
Any suggestions on ns-2 (version 2.33) wimax experiences would be
appreciated.
Thanks,
Steve
I'm getting the following installation error when trying to install
ns-allinone-2.34 on cygwin.
I've manually installed tcl and tk versions 8.4.19; that corrected my last
problem.
I'm now getting the too long for GCC error below.
Can someone point me to a fix for this?
Thanks,
Steve
g++
Hi all
Does anybody know why most of queuing mechanisms implemented in ns2 (like:
sfq, drr, srr, and the rest except DropTail and PriQueue), when it is used
in multihop wireless network, it generates Segmentation Fault error,
especially when the simulation time increases, but when they are used
Hi friends,
in my algorithm I need to decide what action to take based on the node id.
do you know which variable gives me the node id (I'm implementing a new
queue and clearly each node has its own queue but I don't know every time
ns2 uses my queue in which node I am?).
Any suggestions?
Dear friends,
in a wireless 802.11 topology with couple of nodes when I set the queue
type as Queue/DropTail/PriQueue everything is fine but when I change it to
Queue/SFQ it gives Segmentation fault. Does anybody know why this happens?
I tried SFQ with wired links and it works correctly!!!
Any
Hi all,
I would like to run my scheduling algorithm every n seconds. Does anybody
know how can I schedule my function?
Thanks
Hi friends,
In a simulation usually different connections are established and terminated
in different times. During simulation in a particular time how can I find
the list of active sessions?
THANKS
Fariborz
Hi all,
Does anybody know how can I use traffic statistics while simulation is
running. To be specific I need to have number of packets being dropped in
each node on the fly.
I would appreciate any suggestions.
Thanks
Hi all,
Do you have any experience in using SFQ instead of DropTail/PriQueue in
wireless link? When I set ifq as Queue/SFQ or Queue/FQ when I run the
simulator it returns Segmentation Fault. Do I need to set any particular
parameter when I use SFQ? Based on NS manual two configuration
Hi guys
can anyone tell me how could we define a 802.11 link as half-duplex or
full-duplex? I know there are simplex-link and duplex-link in wired network
but don't know about wireless links. I'd be grateful for any suggestions.
Thanks
Hi guysI would like to simulate a multihop ad hoc wireless network. there
are different mac implementations, i.e. Mac802_11, MacCsmaCa, and
MultihopMac. Which one I should use?
Thanks
Hi guysCould you please let me know how can I set link quality (or link
reliability) for 802.11?
Thanks in advance
Hello,
my question is...Are there any TCP traffic models or generatos in ns2? How can
i create my own traffic model ?
___
Χρησιμοποιείτε Yahoo!;
Βαρεθήκατε τα ενοχλητικά μηνύματα (spam); Το Yahoo! Mail
διαθέτει την καλύτερη
--- Στις Τρίτ., 21/10/08, ο/η e f [EMAIL PROTECTED] έγραψε:
Από: e f [EMAIL PROTECTED]
Θέμα:
Προς: ns-users@isi.edu
Ημερομηνία: Τρίτη, 21 Οκτώβριος 2008, 12:29
Hello,
what other applications can i attach over a tcp/ip agent, except FTP
application, in ns2?Or where can i find useful
Hi,
Did anyone got xcast for MANET implementation .
Please I need it .
Thanks
Hi all,
I am working on MAODV protocol, while analyzing the output trace file I
noticed that a node may receive more than one copy of the same packet,
did anyone can explain to me why?
Many thanks
Hi all,
Urgently, can any one tell me at what file the ip header contents take
its values for data packets at AODV/MAODV.
Firas
Hi all.,
I am working on MAODV algorithm, during my program tracing I tried to
print out the destination address, the command I did is
Printf ( the destination address is %d \n@,ih-daddr())
The program works fine but the output for this command is always
234881024.
I think this
Hi all,
At which file the fields of ip header values are inserted for a data
packet, I am working at MAODV protocol.
I know it may be a simple question, but I need it urgently.
Many thanks
Firas
From: Albalas F (AT)
Sent: 18 November 2006 22:51
To: 'ns-users@ISI.EDU'
Subject: events
Dear all,
Any help how to cancel already scheduled event of sending packet.
Thanks
Hi all,
i run the setdest command to get a node scenario for mobile nodes, I
noticed that the nodes is not moving.
I used the following values for the setdest command.
Setdest -n 50 -p 0 -s 20 -t 10 -x 1500 -y 300 output file
Any idea.
Thanks
Hi,
Any idea how to detect lost packet at MAODV during simulation, not from
trace file.
Thanks
Hi,
How to activate the void Udp::recv() at udp.cc file for
receiving packets at MAODV implementation .
Thanks
Hi,
I need to use the loss monitor to monitor the packet loss.
I saw loss-monitor.cc file, how can I use the function included at this
file at aodv.cc file.
Thanks
Hi all,
I am working on MAODV algorithm, I need to change the packet sending
interval (rate) during simulation.
Can anyone give me some hints of how to do that.
Thanks
Firas
Hi all,
How can I change (increase or decrease ) the Traffic bit rate during the
simulation, I mean at the c++ programme.
Thanks
Firas
Hi,
Can anyone explain to me what the following source line means (I am
working on MAODV).
aodv_nh_entry * nh = mt-mt_nexthops.lookup(ch-prev_hop_);
if (nh == NULL || nh-enabled_flag != NH_ENABLE){
if (nh) mt-mt_nexthops.remove(nh);
Packet::free(p);
Hi,
I know it may be a simple question, but I could not manage.
How can I display using printf the value of (ih-daddr) the ip
address of the destination, I can see the type of this field is
nsaddr_t.
Thank in advance
Hi all,
I am implementing AODV, I need to keep all the data packets received by
the receiver node, where and how to add a list at the node to keep these
packets for future use.
Is it implemented or I need to define a list.
Thanks
firas
38 matches
Mail list logo