i install ns 2.35 and the patches of the followoing protocols
zone routing protocol ,location aid routing and power aware routing
--
*MASOODJAN
MSCE FROM IQRA UNIVERSITY
BSIT FROM PESHAWAR UNIVERSITY
DISTRICT/TEHSIL CHARSADDA *
i install ns2.35 in ubuntu i need the following protocols patches
zone routing protocol , location aid routing and power aware routing
thank in advance
*MASOODJAN
MSCE FROM IQRA UNIVERSITY
BSIT FROM PESHAWAR UNIVERSITY
DISTRICT/TEHSIL CHARSADDA *
i need the patch of the following protocols
zone routing protocol , location aid routing and power aware routing
--
*MASOODJAN
MSCE FROM IQRA UNIVERSITY
BSIT FROM PESHAWAR UNIVERSITY
DISTRICT/TEHSIL CHARSADDA *
:
> Hello any one!
>
> Can any one provide me TCL script to run DSR and AODV routing protocls.
> Our students are studying Adhoc wireless Networks as part of their
> curriculum
> I would like to provide them i.e my fellow college the TCL script of these
> two protocols , so that they can have pra
Hello any one!
Can any one provide me TCL script to run DSR and AODV routing protocls.
Our students are studying Adhoc wireless Networks as part of their
curriculum
I would like to provide them i.e my fellow college the TCL script of these
two protocols , so that they can have practical ( simulat
hello
I' doing upstream label assignment in mpls multicast network and when i use
enable-data-driven instead of enable-control-driven then i got following
output. In the following output, the incoming label has incomplete values. If
anyone has idea about upstream label assignment, then can y
Can anyone help me on upstream label assignment on mpls multicast networks?
By default data driven mode is enabled but even if i use enable-data-driven
then upstream label assignment is not working.
--
View this message in context:
http://old.nabble.com/help-me-on-upstream-label-asssignment-tp3
hello
I'm new to ns2 and i'm searching the code on piggybacking the two packets in
multicast networks. While sending the packets, two packets will be piggyback or
merge up to the certain nodes and the original packet has to extract again and
send it to the respective nodes. If it is possible,
hi all
i have made a wireless scenario regarding wimax handover and its has one
problem .
am using ns-2.29 and the nist mobility model ...
the problem is i need to generate file content the position and movement
pattern for a number of mobile node using ./setdest ,
but when i try to run the tcl
Hi friends,
I want to implement dcf operation in ns2. Can I use the
unicast_validation.tcl code (tcl/ex/802.11/unicast) for reference?. I am
a beginner in ns2. so please If you have any other suggestion let me know.
Your inputs would really help me.
Thanks for your help.
Regards,
Chithra
*Hi Dear ALL,'*
**
*Can anyone help me to solve the below error.*
**
*I have install NS 2.29 on Ubuntu and Also on Windows through Cygwin.*
**
*ita85[/home/salam/229/ns-allinone-2.29/ns-2.29]# ./ns scen229/project.tcl
*num_nodes is set 100
warning: Please use -channel as shown in tcl/ex/wireless-m
From: clc...@hotmail.com
To: ns-users@isi.edu
Subject: Help me please!!
Date: Tue, 20 Jul 2010 09:50:54 -0500
Hi ns-users
Hello, I have a question, hopefully someone can help me, because I'm very
desperate. How
I can change the AODV protocol to be able to send several times at an
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I needed the JET (Just Enough Time) protocol for obs networks.
How can i make obs networks with this protocol?
Thanks for all
- --
===
Undergraduate student Spatiotis Christos
Department of Compute
Dear All,
I am using NS 2.31 , but *TORA* is not working properly.
Can anyone help me in this regard.
Regards,
Hi all,
Can anyone help me,
I have problem when install antnet on NS-2.33.
[r...@localhost ns-2.33]#make
..
..
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/root/ns-allinone-2.33/ns-2.33/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory
`/root/ns-allin
hi friends
I am going to implement one paper in that I need to add some node which act
as a blackhole packet droping node so any
kind of idea or code please help me
thanx in advance
hello every body
I write a new protocol in ns and when I make it, I see this error:
make: *** No rule to make target `rcrt/rcrtsink.o', needed by `ns'. Stop.
can anybody help me, plese!!
thanks: fahimeh
Hi all,
Anyone uses multichannels as
http://www.cse.msu.edu/~wangbo1/ns2/nshowto8.html?
I made hyacinth on Ns-2.29 and test with twoflows-2channel.tcl and run
well. Now i have some nodes 0>1>(4)<---3<---2.There are 2
channels: 1-->2-->4 and 2--->3--->4. How to transfer a packet from 1 to
Hi,
Thank you Sir,
In my project, i am Using Hello Packets for neighbor discovery.
But i don know how to create Hello Packets for neighbor discovery.
If you have any idea, please share with me. It will usefull to me.
Thank you
With Regards
Sebastian Terence
On 10/9/09, Mubashir Rehman
Hi,
See these links
http://www.nabble.com/Finding-Neighbors-of-a-Mobile-Node.-td21019174.html#a21019289
Regards
Mubashir Husain Rehmani
2009/10/9 Sebastian Terence.J
>
> Hi Friends,
>
> I want to know how to discover neighbor nodes in mobile environment. If any
> one know please tell me, it
Hi Friends,
I want to know how to discover neighbor nodes in mobile environment. If any
one know please tell me, it will useful for me.
Thank you
-Sebastian Terence
hi
i installed 802.11e tkn under ns-2.31 and after installation of that i run
"multi_udpflows.tcl" of course i run this example with 1000 sec instead of
1 sec and i get this message :
num_nodes is set 5
wired node 0 created
wired node 1 created
wired node 2 created
INITIALIZE THE LIST x
hi to all
I tried to run the instruaction "make depend; make" from your web site to make
recompile to pi.cc &pi.h(because i modified these files) and i attached the
message with this email that i get after running but my problem till now not
solved .
please help me to solve my problem (make m
--- On Fri, 8/21/09, ali majeed wrote:
From: ali majeed
Subject:
To: ns-users@isi.edu
Date: Friday, August 21, 2009, 11:14 PM
Hi!
I am simulating the WSN using energy model but I have the follwoing confusions
1. As you can see that I have defined the grid 100m *100 m, and specifically
defined the node positions 10 m a part from each other along x-axis. But when i
start simulaion the nodes initially are invisible for so
I am mahendran.When i run hyacinth centralized channel assignment algorithm
given in software downloads of website
http://www.ecsl.cs.sunysb.edu/multichannel/
when i run ns multich-tag.tcl i get the following error
ns multich-tag.tcl
um_nodes is set 25
(_o1015 cmd line 1)
invoked from
hello all,
i run the MAODV protocol,but i found a interesting thing:
--s 401.509417279 _0_ AGT --- 746 cbr 256 [0 0 0 0] --- [0:0 234881024:-1
32 0] [746] 0 0
--r 401.509417279 _0_ RTR --- 746 cbr 256 [0 0 0 0] --- [0:0 234881024:-1
32 0] [746] 0 0
--s 410.543042838 _0_ RTR
very very thanks.your help was great!
i do programming in ns-allinone-2.26 .but in finish proc i dont know run
namfilter file. please help me about.
exec tclsh.
hi to all.
please guaide me about indtall ns-allinone-2.26 in redhat 9.
i wnat install it but dont be work for me!
please say me step tp step of install.
tanx
hey hi all...
i m trying to implement a 60 ghz network with
directional antyenna and completely changed mac layer structure.can
someone provide me some help
--
Abhishek Kr. Agrawal
MTech student
Information System Engg.
Deptt. of Electrical Engg.
IIT
Kanpur<
hai guysmy name gedecan you help me to understant and implementing
hybrid RED algorithm for congestion control in TCP??
thanksthats the paper.
salam alikom
when run aprogram by typing acommand
ns example1.tcl
it give me this error
"no display name and no $DISPLAY environment variable
can you help me what is this?and what i do to solve this error
note i run on mandrake10
gazak allah khiran
__
salam alikom
after i wrote "example1.tcl" program as
set ns [new simulator]
.
.
$ns run
i run the program by type "ns example1.tcl" command
it give error message
invalid command name "simulator"
while executing
"simulator create_03"
hello all
i want to simulate soft handoff of cellular network by using ns-2 but i
don't have any idea abt that plz tellme is their any script available or not?i
have to simulate call blocking and call dropping probability of soft handoff of
CDMA and GSM network
plz help me out
plz
Hi,
I have installed ns-allinone-2.30 on Fedora core 8.0.But I am in need of
ns-allinone-2.28 version to run.
I don't know whether the version ns-allinone-2.28 can be installed in the
current ns-2.30 folder itself or not.
If any one know do help me out in resolving this.
Thanks & Regards,
Malar
Dear NS-users,
I am running a tcl scripts using the AODV, DSDV and DSR routing protocols
for my scripts under ns-2.29. Actually, the AODV and DSDV are both working
well. But, we I apply the DSR routing protocol, it gives me:
*Segmentation fault (core dumped)*
Actually, this problem is with me in
Try "make distclean" or "make distclean-recursive. It will do a full
reconfigure from scratch. Look in the Makefile for all the different
types of targets. Hope that helps.
>
> Message: 1
> Date: Sun, 2 Dec 2007 20:33:26 -0500
> From: "Tamer Ahmed" <
Hello Tamer,
I think there are two ns-2 groups, the releases earlier thank 2.30 and
later thank and including 2.30. The first group requires older c++
compiler and you should only install them in a linux fedora version
earlier than core 5. This applies to your 2.29, which should be
installed eith
Dea NS-Users,
I have installed the ns-2.29 on machine under Linux Fedora and tried also
with the ns-2.31.
Actually, after I have unzipped the tar file and wrote the
./installcommand, it gave me the following:
make: Warning: File `Makefile.in' has modification time 1.3e+08 s in the
future
Makefi
hi
i m doing gateway discovery method using a sample file of wired-cum-wireless
scenareo.but i m unable to find out number of receiving packets from the
trace file.plz any body help me to find out total number of received packets
in wired nodes.my id:
[EMAIL PROTECTED]
thanking u .
subhra prak
Hi all !
Thanks for your helping.
I just successfully installed Ns-2.1b6 on RedHat Linux to use OWns
with environment variabale (.bashrc):
export NS_HOME=/home/an/ns-allinone-2.1b6
export
PATH=$NS_HOME/ns-2.1b6:$NS_HOME/bin:$NS_HOME/tcl8.0.4/unix:$NS_HOME/bin:$PATH
export PATH=$NS_HOME/tk8.0.
Hi,
I have wireless program for three nodes and I am able
to generate trace file successfully. Trace file is
having new revised format like following.
s -t 0.898988 -Hs 0 -Hd -1 -Ni 0 -Nx 5.00 -Ny 2.00 -Nz
0.00 -Ne -1.000 -Nl RTR -Nw --- -Ma 0 -Md 0 -Ms 0 -Mt
0 -Is 0.255 -Id -1.255 -It message
Hi all
Please help me
When a node in smac select your scheduler in function "void
SMAC::setMySched(Packet *pkt)"
Then it execute follow instruction
"mhCounter_[0]->sched(CLKTICK2SEC(listenTime_));"
My question is :
1- in the follow function in this instruction "TimerHandler::sched(time)"
aft
This is not an error, Your simulation finished OK.
simple-wireless simply uses an old way of setting up the channel. AS
SAID, look at the way it is done in wireless-mitf.tcl
Claus
SuNiL SoNi wrote:
> Hello all,
> I want to run simple-wireless.tcl in ns 2.28.
>
> When I am trying $ns simple-wir
Hello all,
I want to run simple-wireless.tcl in ns 2.28.
When I am trying $ns simple-wireless.tcl, it shows me:
num_nodes is set 2
warning: Please use -channel as shown in
tcl/ex/wireless-mitf.tcl
INITIALIZE THE LIST xListHead
Starting Simulation...
channel.cc:sendUp - Calc highestAntennaZ_ and
Hi Sunil,
AODV comes with ns2. You can enable it via your tcl script.
If you Google "ns2 aodv" you should get a lot of hits.
http://mailman.isi.edu/pipermail/ns-users/2005-July/051230.html might be
a start.
Claus
SuNiL SoNi wrote:
> Dear friends,
>
> I like to develop AODV and SAODV implement
Dear friends,
I like to develop AODV and SAODV implementation or
simulation using NS2.
If anybody having any code in NS2 about AODV or SAODV
then please reply me.
Or if you have any information about same then also
reply me.
Bye.
Unlimited freedom, unlimited storage. Get it now, on
ht
Hi all,
I'm using the DCCP module contributed by: http://lifc.univ-fcomte.fr/~dedu/ns2/
in ns-2.31. But when I tried the simple script in the attachment, I got the
following error:
DCCPAckVector::sendAckVector - Failed to add ack vector to option: err -1, size
254
Can anyone help me out? It
Hii ns user
I confused how to fix the common problems of "friend class" of drr.cc,
imep/rxmit_queue.h, sfq.cc, snoop.h, tcp-full.h, tcp-rbp.cc,
tfrc-sink.h, and tfrc.h "What this means"
Can you help me??
Can ADMR and ODMRP install in NS 2.30? Until now I have error and error
Thanks
Change
set val(ifq) Queue/DropTail/PriQueue
to
CMUPriQueue
Regards,
Bryan
Bryan's Dynamic Source Routing FAQ - http://www.geocities.com/b_j_hogan/
On Wed, 28 Feb 2007, sandeep v wrote:
>
> hi. this is my tcl script to simulate for 3 nodes using dsr routing
> protocol. it s givin as segmentat
hi all
what random function suitable for distribute sensor
for example i want that 30 senor(node) distribute in 50*50 area
Uniform random is suitable ?
normal is suitable ?
or ...?
please help me
--
Amin Irandoost
apparently it looks like '//' is wrongly placed. It should be '#' instead of
'//' to comment out the line
- Original Message -
From: "Nguyen Vo Minh Chau" <[EMAIL PROTECTED]>
To: "NS USER"
Sent: Tuesday, March 27, 2007 4:39 AM
Please help me !
When I run the LEACH with ns-2.27,it show an error like that :
ns: _o2042 send_now 0x 0x 0 84 2 139.0 0: invalid command name
"//puts"
while executing
"//puts "Warning dst_ is no longer being supported in NS. $args""
(procedure "_o2039" line 3)
(Agent
Hi friends,
Please help to get the NS2 code for Dynamic Virtual
BackBone Routing Protocl(A hybrid protocol for Adhoc
Networks) .The author name is Melvin John ,THE
UNIVERISTY IF ADELAIDE,Australia.
I didn't get his email id.
Please if you have this NS2 code forward it to me.
Thank you very muc
Hi all,
do anyone work with multipath and can help me sending me a perl file which
count how many path there are between 2 nodes?
Thanks in advance
bye
--
Mutui da 200.000 euro? Tassi ridotti da 4.25% solo per richieste online.
Mutuionline.
hi. this is the tcl script to simulate for two nodes using the tora
protocol.but i m gettin errors when i run it. please help immediately
set val(chan) Channel/WirelessChannel;# channel type
set val(prop) Propagation/TwoRayGround ;# radio-propagation model
set val(netif
hi. this is my tcl script to simulate for 3 nodes using dsr routing
protocol. it s givin as segmentation fault. but the same script works for
dsdv just by changin the routing protocol in the script pasted
below...please help me at the earliest as i ve lost a lot of time tryin to
solve this.
the t
Hai i've created a very simple MPLS network in NS2 in TCL coding now i need to
calculate the delay and throughput for that program.
I've one delay.c program as i executed that i get the answer as
average end-end delay is : nan. or nan 0
Kind
Hi, any one kindly please help me in creating MPLS network efficiently
in Ns2. Please do tell me the commands like,
1. flow aggrregation
2. LDP setup
3. LDP release etc
-
Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.
On 12/6/06, amira bourayou <[EMAIL PROTECTED]> wrote:
>
> *hi all,*
> when I did the ./install, I obtained These messages after that ns was
> installed successfuly:
>
> put
> /home/you/ns-allinone-2.30/bin :
> /home/you/ns-allinone-2.30/tcl8.4.13/unix:
> /home/you/ns-allinone-2.30/tk8.4.13/unix
*hi all,*
when I did the ./install, I obtained These messages after that ns was
installed successfuly:
put
/home/you/ns-allinone-2.30/bin :
/home/you/ns-allinone-2.30/tcl8.4.13/unix:
/home/you/ns-allinone-2.30/tk8.4.13/unix into your path environnement so
that you ll be able to run itm/tclsh/w
62 matches
Mail list logo