Re: [ns] problem with make

2007-04-18 Thread Anuradha
hello sir Did you get any solution for this problem. I am also facing the same problem. if you have its solution, please send it to me my mail id is [EMAIL PROTECTED] i will be very thankful to you. Anuradha sachin dahiya wrote:   I am new to NS. I am running NS on cygwin on Windows

Re: [ns] problem with make

2007-04-18 Thread Velan
hi... In ns2 package, some files are relocated or missed. Thats y, the errors may occurs.. So, do one thing, try to install again the ns-allinone package and include the paths. Then execute the make command... Some linkage problems are also raise these errors... So try to do the above...

[ns] Errors during running make command

2007-04-18 Thread Anuradha Sehgal
I am new to NS. I am running NS, version ns-allinone-2.31 on cygwin on Windows XP. Its working fine, ns and nam both are working fine. However when I was trying the 'make depend' and 'make' commands, without making any changes, to see if they are working properly or not, I received the errors

[ns] strange bug in ns2 - halted forever ?

2007-04-18 Thread tdinhtoan
hi, I got the following bug in ns2: I run a Tcl file, after running for a while, it is halted forever (of course it is expected to run more), and I could not get the results at all. Did anyone get the same bug and know how to fix it? Thanks very much. -toan.

Re: [ns] how to computer the Transmission range

2007-04-18 Thread Daniel Mahrenholz
Mohammed Abu Hajar schrieb: Is there any utility in NS-2 that compute the transmission range of a wireless node like in glomosim simulator you type at the command line: radio_range config.in it's gives the range in m like 375m. Look in the indep-utils/propagation directory. But keep in

Re: [ns] Lucents WaveLAN propagation model

2007-04-18 Thread Daniel Mahrenholz
Mohammed Abu Hajar schrieb: How can I implement(write) Lucent’s WaveLAN propagation model in ns-2 tcl script file?, is it like: set opt(prop) Propagaion/TwoRayGround, or set opt(prop) Propagaion/FreeSpace, or set opt(prop) Propagaion/Shadowing. Don't mix the modelling of a

[ns] strange bug in ns2 - halted forever (more details) ?

2007-04-18 Thread tdinhtoan
hi, I got the following bug in ns2: I run a Tcl file, after running for a while, it is halted forever (of course it is expected to run more), and I could not get the results at all. There is no infinite loop in my code. My simulation is a wireless mesh network topology consisting of several

Re: [ns] strange bug in ns2 - halted forever (more details) ?

2007-04-18 Thread Daniel Mahrenholz
tdinhtoan schrieb: I got the following bug in ns2: I run a Tcl file, after running for a while, it is halted forever (of course it is expected to run more), and I could not get the results at all. There is no infinite loop in my code. My simulation is a wireless mesh network topology

[ns] NS-2 Extension for Multi-interface based mobile node??

2007-04-18 Thread Das Santos Kumar
Dear NS users, Anybody knows, if there any generic solution for the simulation of multi-interface based mobile node. The interface type may be anything. Thank you. Best Regards, Santos -Original Message- From: [EMAIL PROTECTED] on behalf of Das Santos Kumar Sent: Tue 4/17/2007

[ns] what about ALOHA protocol in ns2 ??

2007-04-18 Thread Daniel
Hi all, I've to implement a PURE ALOHA protocol for the MAC layer for a ns2 simulation. Is it already integrated in any ns2 file? Does anyone has already implemented it? Do you know where to find it? Thx a lot Daniel Casolini

[ns] error in TCL file

2007-04-18 Thread smita vishwakarma
Hi Folks, Why I am getting this error I have made all the changes in the NS... invalid command name Agent/NewProto while executing Agent/NewProto create _o59 invoked from within catch $className create $o $args msg invoked from within if [catch $className create $o $args msg] { if

[ns] Install QOSRNS into ns-2

2007-04-18 Thread Cao Trong Dai
Hi all, I installed ns-2.31 I added the QOS Routing module (http://sourceforge.net/projects/qosrns) (qosrns-0.2-pre2-ns2.1b9.tar.gz, for ns2.1b9a), I executed the following 3 commands: ./configure make clean make the process failed. Could you help me ?? Thank you for your reading

[ns] adding agent to MIP node

2007-04-18 Thread Sampath N. Ranasinghe
Dear all, I am trying to work with MIP protocols in ns2.29. I want to create a UDP agent at port 5000 on the MIPBS node running mobile IP and have a mobile node MIPMH send data directly to this agent without encap/decap overhead. I have attached the UDP agent in the normal way using $node

Re: [ns] Lucents WaveLAN propagation model

2007-04-18 Thread Mohammed Abu Hajar
Hello Dr. Daniel, Yes, realy I want to simulate the performance of DSR routing protocol using NS-2 , I did that and compare my results I got with a published paper called Performance omparison of Two On-Demand Routing Protocols for Ad Hoc Networks , but unfortunatly there were some

[ns] regarding qaodv protocol

2007-04-18 Thread dorababu
Hi all, i am trying add qos for aodv protocol. i.e. trying for qaodv protocol coding.but i am unable to go forward in this regard.if you have any useful links or files for this plz forward to me . it will be very helpful for my thesis work. thank you for Ur replay. -- Thanks and

Re: [ns] Lucents WaveLAN propagation model

2007-04-18 Thread Daniel Mahrenholz
Mohammed Abu Hajar schrieb: Yes, realy I want to simulate the performance of DSR routing protocol using NS-2 , I did that and compare my results I got with a published paper called Performance omparison of Two On-Demand Routing Protocols for Ad Hoc Networks , but unfortunatly there

[ns] obstacle mobility model

2007-04-18 Thread ibrahim koda
Hi all; for Installation and Usage Procedure for the Obstacle Mobility Model Plugin for NS-2: ihave done the following procedure: - i have downloded and installed the CGAL libraries. - i replaced the file 'voronoi.C'with the one provided with the tarball. - i extracted the NS-2 files and

[ns] Three-stage Clos Network Simulation

2007-04-18 Thread Jacky
I want to run a simulation for three-stage Clos Network in the field of packet switching. In every switching module, every packet from the input port will randomly go to output port, which will cause contention in output due to multiple packets to the same output. Therefore, a central controller

Re: [ns] regarding qaodv protocol

2007-04-18 Thread wacky
this is someone's report who has already fully implemented this. the report is incomplete however, but im sure it will help. iqbal On 4/18/07, dorababu [EMAIL PROTECTED] wrote: Hi all, i am trying add qos for aodv protocol. i.e. trying for qaodv protocol coding.but i am unable to

[ns] what about ALOHA protocol in ns2 ??

2007-04-18 Thread Daniel
Hi all, I've to implement a PURE ALOHA protocol for the MAC layer for a ns2 simulation. Is it already integrated in any ns2 file? Does anyone has already implemented it? Do you know where to find it? Thx a lot Daniel Casolini

[ns] Adding QoS to DSR Protocol

2007-04-18 Thread Mohammed Abu Hajar
Hello all, I want to take the QoS Model that already implemented on AODV protocol and put it on DSR protocol (in other words, adding some QoS extension to DSR protocol). after that I will do a modification on DSR protocol already implement and do a simulation for DSR with QoS without

[ns] Adding QoS extensions to DSR Protocol

2007-04-18 Thread Mohammed Abu Hajar
Hello all, I want to take the QoS Model that already implemented on AODV protocol and put it on DSR protocol (in other words, adding some QoS extension to DSR protocol). after that I will do a modification on DSR protocol already implement and do a simulation for DSR with QoS without

[ns] Please help: Energy AWARE AODV. Power-aware Routing Protocol

2007-04-18 Thread xyza
Hello guys, I badly needed your help. This is urgent. I have posted already some questions regarding my problem but there was no reply. http://mailman.isi.edu/pipermail/ns-users/2007-April/059757.html http://mailman.isi.edu/pipermail/ns-users/2007-April/059765.html Is there someone who did a

[ns] customize transmission range, carrier sense range ?

2007-04-18 Thread tdinhtoan
hi, It seems that the default transmission range and carrier sense range in NS2 are 240 and 550 respectively. What is the default transmission power in NS2? I would like to customize the TxRange to 195 and CSRange to 376. How can I do? + for TwoRay model ? + and for pathloss model ?

[ns] Lost Packets / Drops

2007-04-18 Thread Renan Cunha
Hi everyone, I'm simulating a protocol for adhoc networks but I'm facing a problem with packets loss. The configuration parameters are: set opt(chan) Channel/WirelessChannel set opt(prop) Propagation/TwoRayGround set opt(netif) Phy/WirelessPhy set opt(mac)

[ns] Problem with ./setdest

2007-04-18 Thread leticia bela
Hi, I have this problem : setdest: setdest.cc:595: void Node::RandomSpeed(): Assertion `speed != 0.0' failed. Abort when executing : ./setdest -n 20 -p 2.0 -s 10.0 -t 200 -x 500 -y 500 can you help me please - Découvrez une nouvelle façon

[ns] Make Command.....

2007-04-18 Thread manpreet grewal
Hello, I have installed NS-2.31 under cygwin... I have not made changes in any file. Please tell me what message is displayed (in the end) after make command has fully executed... Thanks in advance, Manpreet..

[ns] how to get a pointer on the C++ node instance bieing in a mac layer C++ code

2007-04-18 Thread Ramzi Tka
Hi all, could someone tell me how to get a pointer on the C++ node instance , being in a mac layer (C++ procedure). thanks ramzi

[ns] Energy model in AODV and AODV RREQ and RREP packets

2007-04-18 Thread xyza
Hello, 1. I just wanted to ask why is it in AODV.cc the #include energy-model.h is commented? Does the AODV in ns-2 already supports energy model or not? 2. Also in the aodv_packet.h, If I wanted to use the energy consumption of the nodes during transmission and reception as well as remaining

[ns] protocol patch modification help

2007-04-18 Thread prasenjit bhavathankar
hello everyone i m working on ns-2 i m using pim-sm protocol patch for modification to find the alternate path routing multicast along with the patch i have classifier.h and classifier.cc file and after applying patch one more file i.e. pim. tcl is placed in the tcl folder so i wanted to

[ns] Fwd: customize transmission range, carrier sense range ?

2007-04-18 Thread rajesh singarapu
sir, i m getting problems while installing dmac code in ns-2.29.3 i have tried --with-tcl --with-otcl etc etc options but i couldn't succeed so please give me your response im using ubuntu 6.0 my c++ version is 4.0 -- thanks and regards, rajesh singarapu mail: [EMAIL PROTECTED] +91