Hi!
There is a small but not insignificant difference between GPRS and GPSR.
These guys seem to have done simulations with GPRS:
http://ieeexplore.ieee.org/Xplore/login.jsp?url=http%3A%2F%2Fieeexplore.ieee.org%2Fiel5%2F9581%2F30299%2F01391808.pdf%3Farnumber%3D1391808&authDecision=-203
If you
Actually GPSR is a geographic routing protocol designed for mobile and
more recently vehicular networks.
On the other hand GPRS (General Packet Radio Service) is a packet
oriented mobile data service for GSM communications.
So there is quite a difference among the two.
Mats Folke wrote:
Hi
Hello everyone!!
I want to use tcp and sctp protocols without receiving acknowledgements.
I have tried ping packets, like:
set sender1 [new Agent/Ping]
$ns_ attach-agent $Server $sender1
for {set i 1} {$i<52000} {incr i} {
$ns_ at [expr ($i*0.01)] "$sender1 send";
}
but
I don't get exactly wha
Hi all!!
I need to simulate my wireless sensor network's Access control
Application.for that i m using ns2/mannasim,..so need some good
tutorials talking about ns2/mannasim for wireless sensor network as a
whole.I have already seen Manual of NS2 on NS site ..plzzz post
the lin
Sir
Problem while running aodv.tcl from
ash...@ashwin-laptop:~/ns-allinone-2.33/ns-2.33/aodv$ ls
aodv.cc aodv_logs.oaodv_rqueue.cc aodv_rtable.cc aodv.tcl
aodv.haodv.o aodv_rqueue.h aodv_rtable.h aodv.tcl~
aodv_logs.cc aodv_packet.h aodv_rqueue.o aodv_rtab
Hello everybody:
I am a new ns user. I want to write a method which can send a packet to all
neighbors of a node. I think, first I should have a list of node's neighbor
and then find targets of these nodes and send the packet to these targets.
I will be thanks if anyone know the answer and help m
hi all,
i want to write a method and call it every 0.05s, this method should do a task
during a laps of time and wait
i know that it is possible to do it with thread in an ordinary program but in
NS it's not possible to use thread, so any bady have solutions ?
Hi, everyone. Now I am do a study in the area of FEC rate control mechanism, I
just think out rate control based on the throughput capacity. Sender checks the
throughput capacity and estimates the available bandwidth how much it can use.
then sender calculate the FEC coding rate based on the th
Hi,
I want to set "datarate per flow" for my wireless network topology
consisting of more than 1 flow(30 flows for my simulation) . Searching
the internet i have found "set dataRate_" but it seems to for 1 flow
only.Any help would be appreciated.
Regards,
Abhishek Sagar
Hi,
does anyonr used the exponential trafic, I tried it but the burst and idle
times of the trafic generated does not have any relation with my parameters:
for burst=3S it generates a trafic of 27s burst???
any idea is appreciated
Nabila
--
View this message in context:
http://www.nabble.com/b
Oops.. my bad.. sorry didnt read it right...
regards,Swaroop
--- On Wed, 3/6/09, Nicholas Loulloudes wrote:
From: Nicholas Loulloudes
Subject: Re: [ns] GPRS simulation in NS-2
To: "Mats Folke"
Cc: "Swaroop Shere" , ns-users@ISI.EDU
Date: Wednesday, 3 June, 2009, 1:27 PM
Actually GPSR is a ge
Dear All,
I am trying to execute two security routing protocols on (redhat,
ns-allinone-2.32) implemented by monarch project group, so i am some
misconceptions about that.
I dowloaded( i.e. "Ariadne-SEAD.tgz for 2.1b3 with above extensions" from
monarch project site) and checked the execution gui
Dear All,
I am trying to execute two security routing protocols on (Fedora Core 2,
ns-allinone-2.32) implemented by monarch project group, so i am some
misconceptions about that.
I dowloaded( i.e. "Ariadne-SEAD.tgz for 2.1b3 with above extensions" from
monarch project site) and checked the execut
Hi all,
Any body please help me in getting an idea of how to estimate the packet
service time at node.
If you know some effective algorithm do pass me the information.
Thanks
Try installing 'make' type yum install make*.* for more details visit
wirelesscafe.wordpress.com > errors with ns2 installations
Thanks and Regards,
Ashwini Shankar Patankar
M.S. Communication Engineering
Birla Institute of Technology and Science
Pilani (India) 333031
Contact No. +91 93202 43917,
15 matches
Mail list logo