Hello!
i want to ask about the Ns2 support for 802.11a channels. How we can switch
to different channels in 802.11a?
Also 802.11a support different data rates and there are 7 different data
transmission modes ranging from 6Mbps
to 54Mbps. How to select different data modes of 802.11a in ns2?
Kind
hi,
you need to declare val(x). as val(x) has been used without declaring it.
Regards
On Sun, Sep 18, 2011 at 6:52 PM, Dineshkumar Dinesh wrote:
>
>
> hello,
> while executing the simple-wireless.tcl file i got the following error i
> dont know how to remove that error,,if u know kindly hel
Hi!
I want to know that for different data rate how to select cbr trate?
for different data rates of 802.11a and 802.11b what should be cbr value
Thanks in advance
--
Regards
-- Forwarded message --
From: Zubiya ..
Date: Wed, Dec 28, 2011 at 9:12 PM
Subject: CBR rate and data rate
To: ns-users@isi.edu
Hi!
I want to know that for different data rates how to select cbr rate?
for different data rates of 802.11a and 802.11b what should be the value
for
Hi,
I need guidance for using Mac/802.11Ext.
1) How to set different data rates while using Mac/802.11Ext?
2) What does the following parameter mean?
* Phy/WirelessPhyExt set noise_floor_ 2.512e-13
;#-96 dBm for 10MHz bandwidth*
does it change with different modulation
Hi,
Can anyone help me about simulating data rates of 802.11a with their
respective modulation schemes (BPSK, QPSK, QAM)
There are patches available e.g. 802.11Ext and dei80211mr but the
information about them is not enough.
802.11Ext provides limited coding schemes and it has skipped BPSK3/4,
QPS
Hi,
Kindly tell me how to use threshold.cc. After execution how to get the
threshold values?
I am using Cisco Aironet 802.11a/b/g card specifications to get
RXThreshold, Transmit power etc for 802.11a simulation. How i can get
CSThreshold?
2ndly when i use RXThreshold and transmit power accordin
Hi,
How to simulate wireless LAN infrastructure mode with AP in NS2?
Thanks in advance
--
Regards
Hi,
during execution of tcl script, is there some way to get values from trace
file (e.g number of sent packets) after a specific time interval (e.g.3ms)?
I need to write a function to count number of sent/received packets or
bytes after every 2ms.
I hope many researchers are present at this plat
Hi,
In Tcl if we want to change the CBR value and data rate dynamically then
how it can be achieved?
i have tried following code but it takes only initialisation value that is
1000
set cbr_rate 1000
proc record {} {
global cb_rate cbr
set ns [Simulator instance]
set $cb_rate [expr
10 matches
Mail list logo